Sangean WR-11 Handleiding

Sangean Radio WR-11

Lees hieronder de 📖 handleiding in het Nederlandse voor Sangean WR-11 (11 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

WR-11

Version 1

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one

wider than the other. A grounding type plug has two blades and a

third grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not fit into your

outlet. consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories specified by

the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the apparatus. When a cart

is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused

for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged. liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15. To Reduce the Risk of Fire or Electric Shock, Do not Expose

This Appliance To Rain or Moisture.

16. The Shock Hazard Marking and Associated Graphical Symbol is

provided on the bottom panel of unit.

17. Apparatus shall not be exposed to dripping or splashing and no

objects filled with liquids, shall not be placed on the apparatus.

18. Excessive sound pressure on ear- and headphones could

impair the hearing ability. Higher setting that idle on the

equalizer leads to higher signal voltages on the output for ear

and headphones.

Features

(1) AM/FM 2 bands.

(2) Wooden cabinet made of MDF in real cherry or walnut or other

optional wood veneer.

(3) Soft and precision tuning.

(4) Rotary tuning and volume control.

(5) Tuning LED indicator.

(6) Detachable power cord.

(7) Headphone socket.

(8) REC out socket can be used as a separate tuner to the

Hi-Fi amplifier or record the radio program by using the output .

(9) Aux in. socket to connect stereo/mono audio source like

CD walkman.

(10) 3 inches 7W full range heavy-duty magnet speaker.

(11) Dynamic Bass compensation for rich bass.

(12) External AM antenna terminal to connect outdoors AM antenna

(USA version only).

(13) External F type FM antenna terminal to connect outdoors

FM antenna.

(14) Internal/External FM antenna switch to select built-in or

external antenna.

(15) 9-14 voltages power adaptor socket for AC adaptor or

vehicle/boat power.

Controls

Power and AM/FM band switch

Volume Control

Speaker

Dial scale

Dial indicator

Tuning Control

AC power cord socket

12V DC input socket ( ideal for vehicles/boats )

Headphone socket

REC out socket

Aux in socket

External/Internal antenna switch

F-type external antenna terminal

AM external antenna terminal (USA version only )

Tuning LED indicator

Power your radio

AC operation

Before you plug the AC cord into the radio, be sure the AC voltage is

correct. Insert the plug on the end of the supplied power cord into the

AC power socket on the back of the radio.

DC operation

For outdoors use, you can power the radio by using 12V DC input

socket from a DC power supply (example, from the power supply of

vehicles or boats). An AC power adaptor with 1 Ampere and center

positive in polarity can also power the radio in house.

Operating your radio FM

1. Connect the Antenna

The radio comes with built-in AM/FM antenna. To improve

FM reception, insert the end of the supplied FM wire antenna into

the F-type antenna terminal and adjust the wire for best reception.

A 75 ohm coaxial cable of outdoor antenna may also be attached

to the terminal. Be sure to switch external/internal antenna switch to

external position while using the supplied wire antenna or connect

the outdoor antenna. In some of the European countries, you may

have to connect the supplied antenna terminal adaptor to connect

with the outdoor antenna.

2. Turn on your radio by switching the Power knob to FM position.

3. Rotate the Tuning Control to select the desired station. On FM,

the tuning scale is marked in MHz (Megahertz). The tuning

LED indicator will appear brightest when best tuning has

been achieved.

4. Adjust the Volume Control for comfortable listening.

5. To switch off the radio , turn the Power knob to OFF position.

Operating your radio AM

1. Connecting the antenna

The radio comes with built-in AM antenna which should be

enough for normal listening. To improve the AM reception,

you may connect the outdoor AM antenna with AM antenna

terminal (USA version only).

2. Turn on your radio by switching the Power knob to AM position.

3. Rotate the Tuning Control to select the desired station. On AM,

the tuning scale is marked in kHz (Kilohertz). The tuning LED

will appear brightest when best tuning has been achieved.

4. Rotate your radio for best reception.

5. Adjust the Volume Control for comfortable listening.

6. To switch off your radio , turn the power knob to OFF position.

Headphone use

Headphone use with this radio should be fitted with a 3.5 mm jack

plug. Insert the headphones plug into the socket marked on the

rear side of the radio. When the headphones are plugged in, the

loudspeaker is automatically disconnected.

AUX IN socket

Connect a stereo or mono audio source (like CD walkman) to this

input to listen the audio program via the speaker.

REC out socket

The radio can be used as a separate tuner by connecting this input to

Hi-Fi system (amplifier) or using this input to make recording in mono

from audio program.

Specifications

Frequency Coverage:

FM 87.50 - 108 MHz

AM 520 - 1710 kHz

Power: AC 120 V/60 Hz/25W or AC 230 V/50 Hz/25W

Internal Antenna System:

AM Built-in ferrite aerial

FM Built-in wire aerial

External antenna terminal:

AM antenna terminal (USA version only)

FM F-type antenna terminal

Output Power: 7W 10% T.H.D. @100Hz

Headphones socket:

3.5 mm dia. Stereo jack monaural output

Output : 5mW + 5mW

Product specificaties

Merk:	Sangean
Categorie:	Radio
Model:	WR-11
Kleur van het product:	Bruin
Type aansluitplug:	3,5 mm
Ingebouwde luidsprekers:	Ja
Aantal ingebouwde luidsprekers:	1
Volumeregeling:	Draaiknop
Materiaal:	Hout
Soort tuner:	Analoog
Backlight:	Ja
Lijnuitgang:	Ja
Radio:	Draagbaar
FM-band:	87.5 - 108 MHz
Stroomverbruik (typisch):	7 W
AM band bereik:	520 - 1710 kHz
DC-in vereisten:	12 V, 1 A