SanDisk SSD Ultra 3D Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor SanDisk SSD Ultra 3D (7 pagina's) in de categorie Solid state drives (ssd). Deze handleiding was nuttig voor 70 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
1
SanDiskĀ® Solid State Drive
Quick-Start Installation Guide
Upgrading your existing hard disk drive (HDD) to a new SanDisk Solid State Drive (SSD) is easy!
This guide provides quick instructions on how to upgrade your SATA-based desktop or notebook computer
HDD to a SanDisk SSD. We also cover cloning your data from your current HDD to your new SanDisk SSD
using cloning software.
Replacing your HDD with a solid state drive consists of three easy steps:
1. Connect your SanDisk SSD to your computer
2. Clone the data from your existing HDD to your new SanDisk SSD
3. Uninstall your HDD and replace it with your new SanDisk SSD
ī… ā€¢ī… Obtainī…dataī…cloningī…software.ī…
There are many options available for purchase, but in this guide we will use data cloning software
provided by ApricornĀ® to walk you through the data cloning process.
ī… ā€¢ī… Conīƒ¼rmī…youī…haveī…theī…requiredī…hardware*ī…forī…yourī…installationī…scenario:
1. SATA data cable
(required for desktops computers only)
2. USB-to-SATA data cable
3. 3.5-inch mounting adapter and screws
(required for desktop computers only)
4. Phillips screwdriver
*ī…Eachī…ofī…theī…aboveī…hardwareī…componentsī…areī…soldī…separatelyī…orī…canī…beī…foundī…inī…theī…SanDiskī…SSDī…Conversionī…Kit.ī…Seeī…www.sandisk.com/go-SSD
BEFOREī…YOUī…START
1
4
This guide applies to most solid state drives;
check the instructions included with your SSD
for more details.
NOTE:
2
3
2
Now that you have the required hardware and data cloning software, a few safety notes:
ī… ā€¢ī… Handleī…yourī…SSDī…withī…care.
ī… ā€¢ī… Keepī…yourī…SSDī…inī…theī…protectiveī…anti-staticī…sleeveī…untilī…youī…areī…readyī…toī…installī…it.
ī… ā€¢ī… Doī…notī…touchī…theī…goldī…connectorsī…onī…yourī…SSD.
ī… ā€¢ī… Toī…minimizeī…staticī…electricity,ī…touchī…yourī…computerī…caseī…beforeī…handlingī…theī…SSD.
ī… ā€¢ī… Doī…notī…disassembleī…theī…SSDī…inī…anyī…way;ī…thisī…willī…voidī…theī…SanDiskī…Manufacturerā€™sī…warranty.**
Nowī…youā€™reī…readyī…toī…begin!
SAFETYī…INSTRUCTIONS
**ī…Toī…reviewī…theī…warrantyī…forī…thisī…product,ī…seeī…www.sandisk.com/wug.
Inī…theī…īƒ¼rstī…step,ī…youī…willī…connectī…yourī…SanDiskī…SSDī…toī…yourī…computerī…inī…orderī…toī…cloneī…yourī…data.ī…
Simply follow these directions:
1. Carefully connect SATA end of the SATA-to-USB cable to your SanDisk SSD.
2. Connect the USB end of the SATA-to-USB cable to an available USB port on your computer.
ī… 3.ī… Waitī…forī…theī…operatingī…systemī…toī…recognizeī…theī…SanDiskī…SSD.
Connecting Your SSD to Your Computer
Thatā€™s it, now youā€™re all set to clone your data!
SATA devices such as SSDs may draw more power than some computers are capable of
delivering.ī…Ifī…theī…SanDiskī…SSDī…isī…notī…recognized,ī…removeī…allī…otherī…USBī…devicesī…fromī…yourī…
computerī…keepingī…onlyī…theī…SanDiskī…SSDī…connected.ī…Keepī…theseī…devicesī…disconnectedī…untilī…
the data migration is complete.
NOTE:
STEPī…1
3
Inī…theī…nextī…step,ī…youī…willī…cloneī…theī…dataī…fromī…yourī…existingī…HDDī…toī…yourī…newī…SanDiskī…SSD.ī…Thisī…stepī…isī…theī…
same for both desktop and notebook computers.
Letā€™sī…getī…started:
Clone your dataSTEPī…2
2.ī… Followī…theī…promptsī…toī…beginī…theī…cloningī…
process. (These may vary depending on the
software used.)
1. Run your preferred data cloning software.
ī… (Weī…areī…usingī…ApricornĀ®ī…EZī…Gigī…IVī…withī…
Data Select.)
3. Select your source drive. (This is usually your
ī… computerā€™sī…internalī…driveī…andī…isī…denotedī…byī…theī…
ī… preīƒ¼xī…ā€œIDEā€.)
4. Next, select your destination drive. (This your
SSD connected to your computer by the
SATA-to-USB cable.)


Product specificaties

Merk: SanDisk
Categorie: Solid state drives (ssd)
Model: SSD Ultra 3D

Heb je hulp nodig?

Als je hulp nodig hebt met SanDisk SSD Ultra 3D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Solid state drives (ssd) SanDisk

Handleiding Solid state drives (ssd)

Nieuwste handleidingen voor Solid state drives (ssd)

ADATA

ADATA SD620 Handleiding

30 November 2024
ADATA

ADATA HC300 ECO Handleiding

30 November 2024
ADATA

ADATA HD680 Handleiding

30 November 2024
ADATA

ADATA HD330 Handleiding

30 November 2024
ADATA

ADATA HD710 Pro Handleiding

30 November 2024
ADATA

ADATA HD710M Pro Handleiding

30 November 2024
ADATA

ADATA SE880 Handleiding

30 November 2024