SanDisk 240GB Extreme PRO Handleiding

SanDisk Solid state drives (ssd) 240GB Extreme PRO

Lees hieronder de 📖 handleiding in het Nederlandse voor SanDisk 240GB Extreme PRO (7 pagina's) in de categorie Solid state drives (ssd). Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

SanDisk® Solid State Drive

Quick-Start Installation Guide

Upgrading your existing hard disk drive (HDD) to a new SanDisk Solid State Drive (SSD) is easy!

This guide provides quick instructions on how to upgrade your SATA-based desktop or notebook computer

HDD to a SanDisk SSD. We also cover cloning your data from your current HDD to your new SanDisk SSD

using cloning software.

Replacing your HDD with a solid state drive consists of three easy steps:

1. Connect your SanDisk SSD to your computer

2. Clone the data from your existing HDD to your new SanDisk SSD

3. Uninstall your HDD and replace it with your new SanDisk SSD

 • Obtaindatacloningsoftware.

There are many options available for purchase, but in this guide we will use data cloning software

provided by Apricorn® to walk you through the data cloning process.

 • Conrmyouhavetherequiredhardware*foryourinstallationscenario:

1. SATA data cable

(required for desktops computers only)

2. USB-to-SATA data cable

3. 3.5-inch mounting adapter and screws

(required for desktop computers only)

4. Phillips screwdriver

*EachoftheabovehardwarecomponentsaresoldseparatelyorcanbefoundintheSanDiskSSDConversionKit.Seewww.sandisk.com/go-SSD

BEFOREYOUSTART

This guide applies to most solid state drives;

check the instructions included with your SSD

for more details.

NOTE:

Now that you have the required hardware and data cloning software, a few safety notes:

 • HandleyourSSDwithcare.

 • KeepyourSSDintheprotectiveanti-staticsleeveuntilyouarereadytoinstallit.

 • DonottouchthegoldconnectorsonyourSSD.

 • Tominimizestaticelectricity,touchyourcomputercasebeforehandlingtheSSD.

 • DonotdisassembletheSSDinanyway;thiswillvoidtheSanDiskManufacturer’swarranty.**

Nowyou’rereadytobegin!

SAFETYINSTRUCTIONS

**Toreviewthewarrantyforthisproduct,seewww.sandisk.com/wug.

Intherststep,youwillconnectyourSanDiskSSDtoyourcomputerinordertocloneyourdata.

Simply follow these directions:

1. Carefully connect SATA end of the SATA-to-USB cable to your SanDisk SSD.

2. Connect the USB end of the SATA-to-USB cable to an available USB port on your computer.

 3. WaitfortheoperatingsystemtorecognizetheSanDiskSSD.

Connecting Your SSD to Your Computer

That’s it, now you’re all set to clone your data!

SATA devices such as SSDs may draw more power than some computers are capable of

delivering.IftheSanDiskSSDisnotrecognized,removeallotherUSBdevicesfromyour

computerkeepingonlytheSanDiskSSDconnected.Keepthesedevicesdisconnecteduntil

the data migration is complete.

NOTE:

STEP1

Inthenextstep,youwillclonethedatafromyourexistingHDDtoyournewSanDiskSSD.Thisstepisthe

same for both desktop and notebook computers.

Let’sgetstarted:

Clone your dataSTEP2

2. Followthepromptstobeginthecloning

process. (These may vary depending on the

software used.)

1. Run your preferred data cloning software.

 (WeareusingApricorn®EZGigIVwith

Data Select.)

3. Select your source drive. (This is usually your

 computer’sinternaldriveandisdenotedbythe

 prex“IDE”.)

4. Next, select your destination drive. (This your

SSD connected to your computer by the

SATA-to-USB cable.)

Product specificaties

Merk:	SanDisk
Categorie:	Solid state drives (ssd)
Model:	240GB Extreme PRO
Kleur van het product:	Zwart
Breedte:	69.85 mm
Diepte:	100.5 mm
Hoogte:	7 mm
Interface:	SATA III
Temperatuur bij opslag:	-55 - 85 °C
SSD capaciteit:	240 GB
Leessnelheid:	550 MB/s
Schrijfsnelheid:	520 MB/s
Component voor:	PC
Overdrachtssnelheid:	6 Gbit/s
Schokbestendigheid:	1500 G
Trillingen, in bedrijf:	5 G
Bedrijfstemperatuur (T-T):	0 - 70 °C
S.M.A.R.T. support:	Ja
TRIM support:	Ja
Stroomverbruik (lezen):	0.13 W
Stroomverbruik (schrijven):	0.13 W