Saitek Pro Flight Throttle Quadrant Handleiding

Saitek Controller Pro Flight Throttle Quadrant

Lees hieronder de 📖 handleiding in het Nederlandse voor Saitek Pro Flight Throttle Quadrant (27 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/27

Pro Flight Throttle Quadrant

Saitek

User Guide

2 3

SAITEK PRO FLIGHT THROTTLE QUADRANT

Congratulations on buying the Saitek Pro Flight Throttle Quadrant. The Pro Flight

Throttle Quadrant features realistic controls conﬁgurable for all the major ﬂight

simulation software to make your ﬂying experiences more realistic.

Installing the throttle quadrant

First, screw the mounting plate to the throttle quadrant using the four screws provided.

You can screw the plate to one of two sides of the quadrant depending on how you

want to mount the quadrant - either in front and below your table or on top of it. Please

note that whichever way you choose to mount the quadrant, ensure that as you look at

the unit the rocker switches are at the bottom. Now tighten the throttle unit clamp’s

screw mechanism until it is ﬁrmly attached to your table (be careful not to overtighten

the screw as you may damage the clamp).

Plug the throttle quadrant’s USB cable into one or your PC’s free USB ports (or Saitek

Pro ﬂight yoke USB hub).

Your throttle quadrant comes supplied with additional lever knobs to conﬁgure any

combination of throttle, ﬂaps, mixture or prop pitch. You can also buy additional

quadrants to link together for more complex multi-engined aeroplane conﬁgurations

and we have included a 4-way throttle knob which links 4 quadrant levers for control of

4-engined aircraft.

Software installation for users of Windows® XP, XP64 and Vista

A) Drivers Only For Typical Users

1. With your computer switched on, close down any programs that are currently

running and insert the Installation CD into your CD-ROM drive.

2. When the Introduction Screen appears, click Install Software to continue. If the CD

does not run automatically, select from the Windows® Taskbar, then Start Run and

type D:\Setup.exe and click - where D:\ is letter of your CD-ROM drive. OK

3. When the Welcome screen appears, click to continue. Next

4. After reading the Disclaimer, select the I accept the terms of the Disclaimer

option and click to continue. Next

5. At the Driver Setup screen, if you haven't already done so, plug the USB cable into

one of your computer's USB ports and click on Next.

6. At the Driver Setup screen, click to test your controller. Next

Detachable lever knobs to conﬁgure any

combination of throttle, ﬂaps, mixture or prop pitch.

Smooth travel levers with 0 button detent

Three 2-way rocker switches

How to assign Quadrant controls to Flight Simulator functions

As you will normally be using the Pro Flight Quadrant alongside another controller in

Flight Simulator, you will need to ensure that you set the levers up correctly within the

game. By default, Flight Simulator will assign them to control the ailerons, elevator and

throttle, which will normally be in addition to that which your other controller is already

controlling; this will cause problems!

To reassign the levers correctly, you must use the Assignments (Flight Simulator 2004)

or Controls (Flight Simulator X) screen within the game. This is accessed from the

Settings menu within the game.

When you access the Assignments/Controls screen in Flight Simulator, ensure that the

Saitek Pro Flight Throttle Quadrant is selected in the option labeled Joystick Type.

Now select Joystick Axes (Flight Simulator 2004) or Control Axes (Flight Simulator X)

at the top of the window.

Once you have done this, simply ﬁnd the command that you want to assign to your

controller from the list of commands, click it and then click the Change Assignment

button. A window will appear asking you to move the part of your controller that you

want to assign to that command - move the axis that you want to assign to that

command and then click OK.

Tip: You must ensure that none of the levers are assigned to the Aileron Axis or

Elevator Axis commands, otherwise they will interfere with your other controller that

you are using alongside the Saitek Pro Flight Throttle Quadrant.

If you wish to reassign the toggle switches on the Quadrant to other functions then you

must use the Buttons/Keys tab at the top of the Assignments/Controls window.

Programming your Saitek Pro Flight Throttle Quadrant with Saitek

Smart Technology software

Introducing Saitek Smart Technology programming software

Saitek Smart Technology Programming Software (SST) is the software Saitek supplies

to conﬁgure your Saitek controller for enhanced functionality. SST delivers a powerful

7. When the Saitek Controller screen appears, try out all your controller's buttons and

controls to show that it is working properly. When you have ﬁnished, click OK.

8. At the Software Setup screen, select Do not install the SST Programming

Software Nextand click . The Programming Software can be installed at a later

date by following instruction (B). below

9. At the Registration screen, select and follow theCheck this box to register now

on-screen instructions, or you can choose to select this option later.

10.Click on to complete the installation. Finish

B) Drivers and Programming Software For Advanced Users

Follow points 1 - 7 of the install procedure in A), then at the Software Setup screen,

select Install the SST Programming Software and click Next.

In the following Software Setup screen, click Next and follow the on-screen

instructions. At this point you will be asked to install such features as the Saitek Magic

Mouse, HID-compliant mouse, Saitek Magic Keyboard and HID Keyboard Device

(these are what XP calls the Programming elements of your Saitek controller).

Continue to click on to accept the installation until the RegistrationNext Finishand

screen appears.

At the Registration screen, select and follow the on-Check this box to register now

screen instructions, or do not select this option and register later.

Upon completion of the installation, you have the option to Run Proﬁle Editor, which

will give you a view of the programming environment. If you do not wish to see the

Proﬁle Editor at this point, just uncheck the box and click on to complete theFinish

installation.

IMPORTANT INFORMATION

Driver updates

From time to time there may be updates to the driver and programming software for

this product. You can check for the latest software updates by visiting the Saitek

website (www.saitek.com) and clicking on Downloads. A drop down menu will appear.

Select Drivers and Software.

Product specificaties

Merk:	Saitek
Categorie:	Controller
Model:	Pro Flight Throttle Quadrant
Connectiviteitstechnologie:	Bedraad
Soort apparaat:	Vluchtsimulator
Aantal knoppen:	6
Compatibele besturingssystemen:	Windows Vista/XP
Minimale systeemeisen:	USB 2.0