Sagemcom D210A Handleiding

Sagemcom Draadloze DECT telefoons D210A

Lees hieronder de 📖 handleiding in het Nederlandse voor Sagemcom D210A (2 pagina's) in de categorie Draadloze DECT telefoons. Deze handleiding was nuttig voor 65 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

D160-D160A

D210-D210A

Making conference calls (3-way conversation)

You can connect one external call to two handsets registered at the base station. To set up a

telephone conference from an external call:

1. Press key. The external user is put on hold.

2. Enter the internal call number. Wait until the internal user answers.

3. Press and hold key, until an aural signal is heard to start a three-way conference.

"conference" is displayed on the handset screen.

Two outside calls

Taking a second call while you are already on line

During a call, a beep is emitted by your operator to inform you that a second call is on hold. A screen

displays the number of this second caller on hold.

Press then the key to take back this new call.

Your first contact is put on hold and you can talk with the second caller.

Making a second call while you already on line

During a conversation, press then dial the number to be called.

The call in process is then put on hold and you can take the second call back.

Switching from one call to the other

To switch from one call to the other, press then the key .

The call in process is then put on hold and you can take the second call back.

Ending one of the two calls

To end one call and continue with the other, press then the key .

The call in process is then ended finally and you take the second call back.

To set up a 3-way conference (the 2 calls and yourself)

During a conversation, press then the key .

You can then talk with the 2 contacts at the same time.

To end the 3-way conference, press the red key .

D160-D160A

D210-D210A

NTRODUCTION

Dear customer,

Thank you for purchasing a Sagemcom DECT telephone we appreciate your trust in us.

This product was manufactured with the utmost care, should you encounter difficulties during its use we

recommend that you refer to this user guide. You can also find information on the following site:

http://www.sagemcom.com

For your comfort and safety, we ask that you read the following section carefully:

ECOMMENDATIONS AND SAFETY INSTRUCTIONS

Your DECT telephone must not be installed in a humid room (wash-up room, bathroom,

laundry room, kitchen, etc.) unless it is 1.50 m away from a water point or outside. Your

telephone must be operated at temperatures ranging from 5°C and 45°C.

Only use the supplied power adapter, connect it to the base socket according to the

installation instructions provided in this booklet and the indications on the identification

label affixed to it (voltage, current, electric network frequency). As a precaution, in case

of danger, the mains adapters act as a disconnecting mechanism for the 230V power

supply. They should be placed near the device and should be easily accessible.

This telephone was designed for use on the public switched telephone network (PSTN).

In case of a problem you must first contact your reseller. Only use the supplied

telephone cord.

For your personal safety, never place your handset on the base without the batteries,

or without the battery cover, you could get an electric shock.

To avoid damaging your handset, only use certified rechargeable AAA batteries NiMH

1.2 V 400 mAH, never use non rechargeable batteries. Insert the batteries in the handset

battery compartment respecting polarity.

At the end of their useful life, batteries must be disposed of according to the recycling

instructions presented in this booklet.

Your DECT telephone has an inside radio range of about 50 metres and up to

300 metres in open space. The immediate presence of metal parts, (of a television for

example), of any electric appliance may result in range reduction.

Some sensitive medical equipment and safety equipment may be affected by the radio-

frequency transmissions of your telephone. In all cases, we ask that you respect the

safety recommendations.

In areas where storms are frequent, we recommend that you protect your telephone line

using a surge protection device .

This equipment does not function in the case of an electric network shutdown: for

emergency calls, it is recommended to use another unit during power cuts.

The CE marking certifies that the product meets the essential requirements of Directive

1999/5/CE of the European Parliament and of the Council pertaining to microwave radio

equipment and telecommunication terminal equipment, for the safety and health of

users, for electromagnetic interference. Furthermore, it efficiently uses the frequency

spectrum attributed to ground and spatial communication to prevent damaging

interference.

The declaration of compliance may be looked up on the www.sagemcom.com site

"support" section or can be obtained from the following address :

Sagemcom Broadband SAS

250, route de l'Empereur - 92848 Rueil-Malmaison Cedex - France

D160-D160A

D210-D210A

EFORE YOU BEGIN

Make sure your package includes the following: Base unit, handset, one battery compartment cover,

telephone line cord, AC power supply, two rechargeable batteries, and this user guide.

In the case of purchasing a pack duo or trio, you will find in addition for each additional handset: a

handset charger, one battery compartment cover, two rechargeable batteries.

Installing the phone

Telephone socket Power socket

Rechargeable

batteries

Paging button

- Pressed briefly : telephone set paging.

- Hold down pressed (4 seconds minimum) :

telephone set registration.

1. Insert the batteries, taking care to respect the polarity as indicated in the compartment.

2. Put the compartment door back on. «SEARCHING...» appears on the screen.

3. Plug the power supply cord into AC outlet and the other end into the power jack on the base

bottom.

4. Plug one end of the telephone line cord into the modular wall phone jack and the other end into

the jack on the base.

5. A welcome message in all the languages supported by the telephone is displayed on the screen,

press *.

6. Select the country using  or  keys, press .

7. A screen asks you to confirm your choice. Press .

You will hear a confirmation tone.

8. Place the handset in the base station to charge for 15 hours prior to first use.

9. After charging, press key. You can hear dial tone.

* : depending on country

D160-D160A

D210-D210A

Handset keys

Intercom key

Earpiece

Red key:

Talk off /

Switch handset on/off

Access to phonebook /

Navigation key down

Navigation key up /

Access the caller list

Deactivate / Activate handset

ringer (Press and hold)

Microphone

Screen

Access to outgoing call list

Menu key

OK key:

Selection / Validation

Green key:

Talk on / Handsfree*

Activate, deactivate keypad

lock (Press and hold)

R key:

Second call / conference

Back key / Cancel /

Correction /

Change standby screen

(Press and hold)

Activate / Deactivate the

microphone

Access to voice messaging

service (Press and hold) **

* D210 and D210 A only

** The voice mail number can be programmed.

To change it, refer to «Assign a shortcut» page 7).

Quick guide to handset display icons

Signal strength icon (blinking when no signal or the signal strength is weak).

Call (blinks when you receive a call)

Answering machine icon (appears when answering machine is activated)

Voicemail icon: indicates that new messages are present in your voicemail box.

Handset ringer muted.

Received call list (appears when a new call is in the caller list).

Phonebook icon (appears when you enter to the phonebook list).

Charging status icon ( : Full ; + flashing (charger not connected) : Flat; blinking

during charging).

D160-D160A

D210-D210A

Changing the batteries

Make sure the telephone is OFF before you replace batteries.

1. Remove the batteries compartment door.

2. Remove old batteries.

3. Insert the new batteries.

4. Put the batteries compartment door back on.

5. Place handset in the base to charge.

ENU STRUCTURE

Quick reference

phonebook New entry Advanced set Change pin

List registration

Edit entry Unregister

delete Country

delete all reset

Directe mem. AUTO PREFIX

Recall time

Personal set Handset name Dial mode

Handset tone First ring

LANguage

Auto hang-up ANsw MACHINE* play

Delete all

Clock&alarm date / time Answ . on/off

Set format RECORD OGM

Alarm ANSWER MODE

Alarm tone SETTINGS

D160 A / D210 A Only

Navigation

To navigate among the menus, use the keys: , , and or (or).

Example: To change the ring tone, go to the menu Personal set / Handset tone / ring tones.

To do this:

1. Press . Select " Personal set " using the  or key.

2. Press . Select " Handset tone " using the  or key.

3. Press . Select "ring tones " using the  or key.

4. Press . 10 melodies are available: " melody 1 "… " melody 10 ".

Select the desired melody using the or key.

5. Press key to confirm your selection.

D160-D160A

D210-D210A

ALLS

Handsfree (D210/D210A only)

If you bought a D210/D210A, you can enable the handsfree mode of the handset while having a

conversation with your contact.

1. Press to activate the handsfree mode of the handset

2. To deactivate the handsfree mode, press .

Make a call

Ensure that the handset is switched on.

1. Press the Talk key . you will hear the dialling tone and the display will show you the phone

icon .

2. Enter the phone number.

- OR-

1. Enter the phone number first and then press key.

Answering a call

When the phone rings, press the key to answer the call.

You can adjust the volume of what you hear through the handset at any time by

pressing  or ҏkey.

Ending a call

To end a call press .

Microphone mute function

-Enable MUTE function: press the key. The display shows "mute on".

-Disable MUTE function: press the key. Your correspondent can hear you again.

Voice Mail (According to operator)

With this function you can receive calls in your absence on a voice message recorder in the switched

telephone network. To indicate that a new message has been received the envelope icon and

the new event message "

voicEmail

" are displayed on the Handset screen.

Your voicemail number is not set in the factory.

1. Dial the number of your operator’s voice message recorder.

2. The envelope icon disappears when there are no more new messages.

D160-D160A

D210-D210A

ALL LOG

Calling Line Identification Presentation (CLIP)

This CLIP phone stores and displays CLIP information provided by your local telephone company.

You must subscribe to CLIP service in order to use this unit.

If you have not subscribed to CLIP service or if the caller number is suppressed, the display shows

“unknown”.

Display of numbers not available:

-Unavailable: you are not in same area as your contact.

-Hide id : your contact does not want its number to be displayed.

Received call log

The received call log presents the calls you received. (max.10 last calls).

1. Press , the icon is displayed.

2. The most recent name or call number is displayed according to whether your contact's number

is included in your phonebook or not.

3. Press to display the date and the time of the call.

4. Press the or  key to go through the list.

If the number is too long (more than 12 digits), the screen will not show the number

in full.

Press key to go to last number page for CID length.

Dialled call log

The dialled call log presents the calls you made (max. 5 last calls).

To consult the list:

1. Press briefly .

2. The last dialled number is displayed. Press the or  key to consult the list of the last 5

numbers dialled.

Calling back a caller

1. Press the or key.

2. Press the or  key to select a call record.

3. Press the key to dial the number.

Making an entry in the directory from the list of calls received.

1. Press the or key.

2. Use  or  to select the desired caller number.

3. Press key, then select "save number ".

4. Enter the name of the entry. Press .

Deleting caller list record

1. Press the or key.

2. Press or  key to select a call record.

3. Press .

- Select " delete " to delete the current record.

- Select " delete all " to delete the entire Caller list.

D160-D160A

D210-D210A

4. A confirmation screen appears.

5. Using the telephone touch keys:

- If you do not wish to delete the current record, press .

- To delete the current record, press .

HONEBOOK

You can store 80 phonebook entries (24 digits and 12 characters) in your phonebook.

Dialling a memory number

1. Press key to consult the list of contacts.

2. Press the or  key to consult directory entries.

3. When you have selected the desire number, press .

Creating / Storing a memory

1. Go to the menu " phonebook " / "new entry "

2. Enter the name of the entry. Press .

3. Enter the number of your entry using the keypad keys. Press .

Editing a memory

1. Go to the menu " phonebook " / " edit entry ".

2. Select the entry you want to edit using or . Press .

3. You will then enter the name input screen and the cursor will be at the end of the name :

- The information is accurate. Press key.

- To correct the name, press key to delete characters.

- Enter the new name and press key.

4. You will then enter the number screen and the cursor will be at the end of the number :

- The information is accurate. Press key.

- To correct the number, press key to delete the numbers.

- Enter the new number and press key.

Deleting a memory / the whole phonebook

1. Go to the menu " phonebook " / "delete " (or " delete all " to delete the entire phonebook list).

2. Select the entry you want to delete using  or . Press :

- If you do not wish to delete the entry, press .

- To delete the entry, press key.

Assign a shortcut

This menu allows you to record two quick dial numbers assigned to the keys 1 and 2 on the keypad.

1. Go to the menu " phonebook " / " direct mem. ".

2. Select the key you want to assign a number ( or ).

3. Press , " no number " is displayed on the screen.

4. Press , " eidt number " appears on the screen.

D160-D160A

D210-D210A

5. Press .

6. Enter the name of the entry and press to confirm.

7. Enter the number of the entry. Press to confirm. You will hear a confirmation tone.

To call the number you have assigned to one of the shortcut keys. Hold down the key on which the

number was programmed ( or ).

Inserting a pause (in dialling)

You can insert a pause in dialling a phone number if you want to wait before actually ringing.

While dialling the number you want to call, press and hold the key to insert the pause: The

display shows a ’’P’’.

SING THE MULTI

HANDSET CAPABILITIES

These functions are used for handset management when two or more handsets are registered on the

same base.

Intercom Call/Intercom

1. Make sure your handset is on standby mode.

2. Press the key on the handset.

- If your installation has two handsets, the second handset is directly called, and, "handset "

followed by the handset number are displayed on the screen.

- If your telephone installation has more than two handsets, the icon INT blinks on the screen

and the number of all registered handsets.

- Enter the desired handset number or press the key if you want to call all handsets.

Answering an internal call

1. The ring melody from an internal call is different from an external call. " handset " and the calling

handset number appear on the screen. The " " is blinking.

2. Press the key to answer. The " " stop blinking.

3. Ending an internal call press the key.

Managing an external and an internal call

Transfering an external call to another handset registered on same base

1. During a call, press . The external user is put on hold.

2. Enter the internal call number. When the user answers, you can announce the call.

3. Press the key to transfer the call.

To switch from one call to another, press and hold down the key until an aural

signal is heard.

If the called handset does not answer, press to take back the call.

D160-D160A

D210-D210A

USTOMISING THE HANDSET

Handset naming

The default name of the handset is "

handset N

" where

is the number of the registered handsets.

1. Go to the menu " personal set " / " handset name ".

2. Use the keypad to enter the new name (up to 10 characters).

Use key to delete wrong input if necessary. Press .

Handset ringer level

1. Go to the menu " personal set " / " handset tone " / " ring volume ".

2. Use or  to select the volume level then press to confirm your selection.

Handset ringer melody

1. Go to the menu " personnalis." / " handset tone " / " ring tones ".

Ten melodies are available: " melody 1 "… " melody 10 ".

2. Use or  to select the ring tone. Press .

Key tone On/Off

1. Go to the menu " personal set " / " handset tone " / " key beep ".

An information screen shows you the current state. Use  or to modify it.

2. Press key to confirm your selection.

Modifying the language

1. Go to the menu " personal set " / " language ".

2. Use or to choose the desired language. Press key to confirm your selection.

Auto talk off

When active, the auto talk off feature enables you to automatically hang up as soon as you put the

handset on its base.

1. Go to the menu " personal set " / " auto hang-up ".

An information screen shows you the current state. Use  or  to modify it.

2. Press key to confirm your selection.

Key lock

1. Press and hold key for 1 second. An information screen shows you that the keys are

locked.

2. To recover to normal, press and hold key 1 sec.

D160-D160A

D210-D210A

ETTING THE DATE AND TIME

Time and date

After a power cut the time has to be reset.

1. Go to the menu " clock & alarm " / " date/time". Current date is displayed.

- To keep the date, press .

- To change it, enter the new date in 20YY/MM/JJ format.

- To go back to change the entry .

2. Press . Current time is displayed.

- To keep the time, press .

- To change it, enter the new time in the HH : MM format.

(If, after entering the time, the time format is 12H,use the key to set aM and the key to

set pM).

- To go back to change the entry .

3. Press .

Hour format

1. Go to the menu "clock & alarm " / " set format " / " time format ".

A screen displays the current format, use  or to change it.

2. Press .

Date format

1. Go to the menu "clock & alarm " / " set format " / " date format ".

A screen displays the current format, use  or  to change it.

2. Press .

Alarm clock

1. Go to the menu " clock & alarm " / " alarm ".

 To activate the alarm once, select "on once ".

 To repeat the alarm each day at the programmed time, select "on daily ".

 To deactivate the alarm, select "off ".

2. Select your choice then press .

Enter the time when you want the alarm to go off: "HH – mm ".

(If, after entering the time, the time format 12H, use  key to set aM and the keyto set pM).

3. Press .

Modifying alarm tone

1. Go to the menu " clock & alarm " / " alarm tone ".

3 melodies are available: "melody 1", "melody 2" et "melody 3".

2. Select the desired melody, press key to confirm your selection.

You will hear a confirmation tone.

D160-D160A

D210-D210A

DVANCED SETTINGS

Base master PIN code

Your base station code (default setting 0000) is required to access certain security functions. This

may be at least 4 digits and a maximum of 8 digits.

1. Go to the menu " advanced set " / " change pin ".

2. Enter your old code first, press .

3. Enter your new PIN code.

Each time a digit is entered the «_» is replaced by a «*».

4. Press key to confirm your new PIN code. You will hear a confirmation tone.

Carefully note your base station code. You will need it to change certain settings.

Association of handset & base

1. Press and hold key for 5 seconds (after 1 minute if no Handset has started association

process the base goes back to standby).

2. Go to the menu " advanced set " / " registration ".

3. Enter the 4 digit base master PIN code (default 0000). Press .

4. Once the handset is registered. The handset automatically exits the registering mode.

5. The handset number assigned automatically by the base appears on the screen.

Disassociation of a handset

1. Go to the menu " advanced set " / " unregister ".

2. Enter the 4 digit base master PIN code (default 0000). Press .

3. Select the handset you want to delete using the  or  key then press (at standby state,

"pls reg h/s" is displayed on the screen).

Modifying the country

1. Go to the menu " advanced set " / "country ".

2. Enter the base master PIN code (default 0000). Each time a digit is entered the «_» is replaced

by a «*». Press key to confirm.

3. Using the or key, select the country where you will use the telephone. Press .

4. A confirmation screen appears, press .

The message "wait.." appears on the screen. You will hear a confirmation tone.

Restoring the Handset / Base Default Settings

1. Go to the menu " advanced set " / " reset ".

2. A confirmation screen appears, press .

Dépliant LU D160_D210_A.fm Page 1 Samedi, 20. décembre 2008 11:35 11

D160-D160A

D210-D210A

ERMS AND

ONDITIONS FOR

NITED

INGDOM

RELAND ONLY

In order to apply the guarantee, you should contact the SAGEMCOM Helpdesk or the retailer where you

purchased the equipment. Proof of purchase will be required in either case.

Please make sure that you use your equipment only for the purpose for which it was designed and under

normal usage conditions.

SAGEMCOM do not accept any liability for the equipment if used outside the frame of its original designed

purpose or any consequence that may arise from this usage.

Should any malfunction arise, the SAGEMCOM Helpdesk or your retailer will advise you how to proceed.

A) General Guarantee conditions

SAGEMCOM undertakes to remedy by repair or exchange at its own convenience, free of charge for labour

and replacement parts, any defects in the equipment during the guarantee period of 12 (twelve) months or 3

(three) months for accessories, from the date of original invoice of the Equipment, where those defects are a

result of faulty workmanship.

Unless the customer has concluded with SAGEMCOM a maintenance contract in respect of the equipment

which specifically provides for repairs to be carried out at the customer's premises, the repairs will not be

carried out on the equipment at the customer premises.

The customer must however return the defective equipment at his/her own expense, to the address supplied

by the SAGEMCOM Helpdesk or by the retailer.

In the case that a product needs to be sent in for a repair, it must always be accompanied by a proof of

purchase (which is not altered, written on or in any way made illegible) showing that the product is still under

guarantee. In the case that no proof of purchase is enclosed, the SAGEMCOM repair centre will use the

production date as its reference for establishing the guarantee status of the product.

Apart from all legal obligatory rules, SAGEMCOM, do not give any Guarantee, either implicit or explicit which

is not set force in the present section, and can not be held responsible for any direct or indirect, material or

immaterial damage, either in or out of the frame of the present guarantee.

If any provision of this guarantee shall be held to be in whole or in part invalid or illegal due to an obligatory

rule applicable to consumers pursuant to their national legislation, such invalidity or illegality shall not impair

or affect the remaining provisions or parts of this guarantee.

This guarantee does not affect the Customer statutory rights.

B) Exclusions From Guarantee

SAGEMCOM shall have no liability under the guarantee in respect of:

x Damage, defects, breakdown or malfunction due to one or more of the following:

- Failure to properly follow the installation process and instructions for use

- An external cause to the equipment (including but not limited to: lightening, fire, shock, vandalism,

inappropriate conditions of electrical network or water damage of any nature)

- Modifications made without the written approval of SAGEMCOM

- Unsuitable operating conditions, particularly of temperature and humidity

- Repair or maintenance of the equipment by persons not authorised by SAGEMCOM

x Wear and tear from normal daily use of the equipment and its accessories

x Damage due to insufficient or bad packaging of equipment when returned to SAGEMCOM

x Usage of new versions of software without the previous approval of SAGEMCOM

x Work on any equipment or software modified or added without the prior written consent of

SAGEMCOM

x Malfunctions not resulting from the Equipment or from software installed in user workstations for the

purpose of use of the equipment

Communication problems related to an unsuitable environment including:

- Problems related to access and/or connection to the Internet such as interruptions by access

networks or malfunction of the line used by the subscriber or his correspondent

- Transmission faults (for example poor geographical coverage by radio and TV transmitters,

interference or poor line quality)

- Local network faults (wiring, servers, workstations) or the failure of the transmission network (such

as but not limited to interferences, fault or poor quality of the network

- Modification of the parameters of the cellular or broadcast network carried out after the sale of the

Product

D160-D160A

D210-D210A

Prefix (Depending on Country)

If a PABX is used in a private network, you can program the outside call prefix.

This function sets:

The PABX prefix number: this number will be added at the beginning of the number you dialled.

The number to be detected: if the number you dialled starts with the recorded sequence, this

sequence will be automatically deleted.

These two settings are not applied if number you dialled starts with

"#", "*" or "P".

1. Go to the menu " advanced set " / " auto prefix ".

-Select "detect digit "to define the number giving you access to the outside line.

-Select "prefix"to specify the «digits before prefix».

2. Press .

Flash timing

If you connect your telephone to a private automatic branch exchange or use it in a foreign country,

you may need to modify the flash duration in order to use your telephone correctly with regard to the

following functionalities: outgoing 2nd call, incoming 2nd call, conference call.

Contact your administrator, who will supply the appropriate time period, and proceed to the new

settings.

1. Go to the menu " advanced set " / " recall time ".

2. Select the appropriate time period, press .

Modifying the dialing mode (Depending on Country)

Most telephone systems use the tone dialling mode. You can, however, use the pulse dialling mode:

1. Go to the menu " advanced set " / " dial mode ".

2. Two modes are available: " tone " and " pulse ".

3. Press .

First ring

Activating this function is only useful if your line does not have the CLIP service.

This menu allows you to arrange for your telephone to ring when a call is received even if it is

connected on the same line with another device (a fax, a cord telephone, etc.).

This function is activated as default. It will be automatically deactivated when a CLIP call is received

(the number of which will be displayed on the handset screen).

1. Go to the menu " advanced set " / " first ring ".

Use the or keyto change the state.

2. Press .

D160-D160A

D210-D210A

NSWERING MACHINE

ODELS

D160A / D210A

ONLY

)

Your telephone features an answering machine with pre-recorded announcements and the possibility

of remote access.

The answering machine function of your telephone has two operating modes:

-Basic answering machine: an announcement indicates that you are not available. Your

correspondent cannot leave any messages

-Recording answering machine: an announcement tells your correspondents that they can leave

you a message, which they can record after a beep.

D160A and D210A models offer pre-recorded announcements in English language.

It is recommended to record your own announcements

Refer to paragraph Modifying the outgoing message (OGM) on page 15.

Control panel :

Description :

Key Functions

Start playback of the messages.

Stop playback of the messages *.

1 time up: go to the next message.

1 time down: go back to the beginning of the message.

2 times down: go back to the previous message.

Delete the current message (Short press in playback mode).

Delete all messages already played back (Press and hold outside

playback mode)

Press "+": Increase the base loudspeaker volume.

Press "-": Decrease the base loudspeaker volume.

Enable or disable the answering machine function.

* The playback resumes from the first message.

D160-D160A

D210-D210A

Enabling / disabling the answering machine

From the base

To deactivate your answering machine, press the key on the base. The indicator light of the

key goes off.

To activate your answering machine, press again the key on the base. The indicator light of the

key turns on blue and the announcement that will be used is broadcast.

Each time you power on your base, the answering machine goes to its previous

state (activated or deactivated).

From the handset

1. Go to "answ machine" / "answ. ON/OFF" .

2. Select "ON" or "off" using the or key to activate or deactivate your answering machine,

press .

Modify the answering machine mode

1. Go to "answ machine"/ "answer mode" / "answ. &record" (or "answer only").

2. Select "answ. &record" or "answer only" using the or key, press .

You will hear a confirmation tone.

Modifying the outgoing message (OGM)

Recording a personal outgoing message

1. Go to "ANSw machine "/ "record ogm"/ "answ. & record" (or "answer only").

2. Select "record ogm" using the or , press .

3. Clear state your announcement close to the base.

4. At the end of your announcement, press . A confirmation beep is issued.

If you make a mistake while recording the announcement, repeat the operations described above

until you are satisfied with your announcement.

The maximum recording duration for an announcement is 120 seconds.

The recording start and end beeps are not part of your announcement.

The recording of a new announcement will automatically replace the previous

announcement.

Playing outgoing message

1. Go to "answ machine "/ "record ogm"/ "answ. &record." (or "answer only").

2. Select "play" using the or key, press .

The announcement that will be used is broadcast.

After broadcasting the announcement, your answering machine will return to standby mode.

If no announcement is recorded, you will hear a beep.

D160-D160A

D210-D210A

Delete your personal outgoing message

If you have not saved a personal announcement, the answering machine will

automatically use one of the pre-recorded announcements.

1. Go to "answ machine " / "record ogm"Answ. / &record" (or "answer only").

2. Select "delete" using the or key, press .

The anonymous announcement corresponding to the current answering machine mode

(simple/recorder) is automatically played.

At the end of the playback, the announcement is deleted and you are back to the previous

menu.

Adjusting the volume of the base speaker

Press successively the top or bottom the on the base until you obtain a satisfactory level.

Playing messages using the base

If you have received new messages, the indicator light of the key flashes blue and the icon

flashes on the handset screen.

Press the key to listen to your messages:

- If you have new messages, only the latter will be played, from the most recent one to the oldest one.

- If you have no new messages, all the older messages will be played, from the most recent to the

oldest one.

A beep is issued after each message is broadcast and the next message is broadcast automatically.

For the key to operate correctly,

Use it only after 2 seconds as from the start of message playback.

When a message is being left by a correspondent, you can open the line (by

pressing the key) to answer at any time.

Listen again to the current message

Press the bottom of the key during the playback of the message.

Listen again to the previous message

Press twice the bottom of the key to hear the previous message again.

Go to the next message

During playback of the message, press the top of the key to skip to the next message.

D160-D160A

D210-D210A

Stop the playback of the messages

Press the key to stop the playback of the messages.

When you press the key a second time the playback resumes from the first

message.

Playing messages using the handset

If you have received new messages, the indicator light of the key flashes blue and the icon

flashes on the handset.

1. Go to "answ machine " / "Play".

2. Press .

Deleting messages

Deleting the current message

During the playback of the message, press the key.

The message in progress is deleted:

- If you have other messages, the next message is broadcast.

- Otherwise, the answering machine returns to standby mode.

Deleting all messages already played back

1. In standby mode, hold down the key until you hear a beep.

This beep informs you that all your messages already played back have been deleted.

- OR -

1. Go to "answ machine "/ "delete all" .

2. Press .

3. Press to confirm deletion.

A beep indicates that all messages already played back have been deleted.

D160-D160A

D210-D210A

NSWERING MACHINE SETUP

ODELS

D160A / D210A

ONLY

)

Number of rings

This parameter enables you to set the number of times your telephone rings before the answering

machine answers a call. The number of rings can be set between 2 and 7.

You can also select the "ECONOMY"mode. The "ECONOMy" mode automatically determines the number of

rings: If there are no new messages on the answering machine, the number of rings will be 4,

otherwise the number of rings will be 2.

1. Go to "answ machine "/ "settings" / "ring delay".

2. In the list, select the desired number of rings (between 2 and 7) using the  or keyor the

"ECONOMy" mode, Press .

Remote access to answering machine

Your answering machine can be interrogated remotely. This function lets you play back your

messages and set up your answering machine from another telephone located outside your home.

Activate/deactivate remote access

1. Go to "answ machine "/ "settings" / "remote acc.".

2. Use or to select "activate" or " deactivate " setting.

3. Press key to confirm your selection. You will hear a confirmation tone

Remote access control

To remotely access your answering machine: Dial your telephone number and wait for the answering

machine to come on.

When your outgoing message is played, press # and enter your remote access code (0000 by

default).

The code for remote access to the answering machine corresponds in fact to the

PIN Code of your Base. This code is 0000 by default, and it can be modified from

the "ADVANCED SET / CHANGE PIN" menu (refer to the paragraph “Base master PIN code”

page 11).

A beep will indicate access to the answering machine. You can carry out the following operations:

1: Previous message. 6 : Delete the current message

2 : Listen to your messages / back to the

beginning of the message

8 : Stop the playback of the message

3 : Next message 9 : Switch OFF the answering machine

Memory status

Your answering machine has a capacity of 15 minutes (2 minutes for the OGM and 13 minutes for

the messages) or 59 messages.

When your answering machine reaches its maximum recording capacity, you can no longer receive

new messages.

D160-D160A

D210-D210A

ATTERIES SAFETY PRECAUTIONS

To avoid any risk of explosion:

 Make sure you have inserted the batteries correctly.

 Use only with 1,2V 400mAh type or equivalent rechargeable batteries pack.

 Do not dispose of the batteries in a fire. The cell may explode.

 Check with local code for possible special disposal instructions.

 Do not burn, disassemble, mutilate or puncture. Like other batteries of this type, toxic materials could be

released which can cause injury.

 To reduce the risk of fire or personal injury, use only the battery listed in the user’s guide.

 Keep batteries out of the reach of children.

 Remove batteries if storing over 30 days.

ENERAL PRODUCT CARE

To keep your telephone working and looking good, follow these guidelines:

 Avoid putting the phone near heating appliances and devices that generate electrical noise (for example,

motors or fluorescent lamps).

 DO NOT expose to direct sunlight or moisture.

 Avoid dropping and other rough treatment to the phone.

 Clean with a soft cloth.

 Never use a strong cleaning agent or abrasive powder because this will damage the finish.

 Retain the original packaging in case you need to ship the phone at a later date.

ROUBLESHOOTING

Causes of poor reception:

 Aluminium siding.

 Foil backing on insulation.

 Heating ducts and other metal construction can shield radio signals.

 You are too close to appliances such as microwaves, stoves, computers, etc).

 Atmospheric conditions, such as strong storms.

 Base installed in the basement or lower floor of the house.

 Base is plugged into an AC outlet with other electronic devices.

 Baby monitor is using the same frequency.

 Handset batteries is low.

 You are out of range of the base.

D160-D160A

D210-D210A

Auto-diagnostics

Problem Solution

No display

xAre batteries fully charged? Try replacing the batteries. Make sure the batteries

are properly installed and connected.

xIf you are using AC power, make sure that the unit is connected to a non-

switched electrical outlet. Disconnect the unit from the plug and plug it in again.

xDid you order Caller ID service from your local telephone company?

No dial tone

xCheck installation :

Is the base power cord connected to a working outlet?

Is the telephone line cord connected to the base unit and the wall jack?

xDisconnect the base from the wall jack and connect another phone to the same

jack. If there is no dial tone in the second phone, the problem might be your

wiring or local service.

xIs the handset out of range of the base?

xMake sure the batteries are properly charged (12 hours).

xAre the batteries pack installed correctly?

The batteries may need to be charged.

Dial tone is OK,

but can’t dial out xMake sure the tone/pulse setting is correct.

Handset does

not ring

xMake sure the RINGER setting on the handset is programmed to ON.

xYou may have too many extension phones on your line. Try unplugging some

phones.

See solutions for «NO dial tone».

You experience

static, noise or

fading in and out.

xIs handset out of range?

Move closer to the base.

xDoes the base need to be relocated?

xCharge batteries.

xMake sure base is not plugged into an outlet with another household appliance.

Warning beeps

- Place handset in base for 20 seconds to reset the security code. If that doesn’t work, charge batteries for

15 hours.

- Clean charging contacts on handset and base with a soft cloth

- See solutions for «No dial tone»

- Replace batteries.

Memory dialling

- Did you program the memory location keys correctly?

- Did you follow proper dialling sequence?

- Make sure the tone/pulse setting is correct.

- Did you reprogram numbers into memory after power outage or batteries replacement?

D160-D160A

D210-D210A

NVIRONMENT

Preservation of the environment is an essential concern of SAGEMCOM. The desire of SAGEMCOM is to

operate systems observing the environment and consequently it has decided to integrate environmental

performances in the life cycle of its products, from manufacturing to commissioning, use and elimination.

Packaging

The presence of the logo (green dot) means that a contribution is paid to an approved

national organisation to improve packaging recovery and recycling infrastructures.

To facilitate recycling, please respect the sorting rules set up locally for this kind of waste.

Batteries

If your product contains batteries, they must be disposed of at appropriate collection

points

The product

The crossed-out waste bin stuck on the product or its accessories means that the product

belongs to the family of electrical and electronic equipments.

In this respect, the European regulations ask you to dispose of it selectively:

At sales points in the event of the purchase of similar equipment.

At the collection points made available to you locally (drop-off centre, selective

collection, etc.).

In this way you can participate in the re-use and upgrading of Electrical and Electronic Equipment Waste,

which can have an effect on the environment and human health.

D160-D160A

D210-D210A

x Normal servicing (as defined in the user guide supplied with the equipment) as well as malfunctioning

due to servicing not being carried out. Servicing costs are in any event always borne by the customer.

x Malfunctions resulting from the usage of products, consumables or accessories not compatible with the

equipment.

Out of Guarantee Repairs

In the cases set forth in B) as well as after expiry of the guarantee period, the customer must ask the

Authorised SAGEMCOM Repair Centre for a cost estimation prior to work being carried out.

In such cases, the repair and delivery costs will be invoiced to the customer.

The foregoing shall apply unless otherwise agreed in writing with the customer and only for the United

Kingdom and Ireland.

www.sagemcom.com

ERMS AND

ONDITIONS FOR OTHER COUNTRIES

If, despite our best efforts, your product presents any defects, you should refer to your retailer and present

the proof of purchase that they gave you on the day of purchase.

Should any malfunctioning arise, the retailer will advise you what to do.

For the warranty to apply, you should ensure that the product was used in accordance with the instructions

for use and the purpose for use, and that you have at your disposal the sales invoice or receipt stating the

date of purchase, the name of the retailer, the reference and the serial number of the product.

No coverage shall be given under this warranty if the following conditions are applicable:

x The required documents have been modified or altered in order to take advantage of the warranty.

x The manufacturing numbers, product brands or labels have been altered or made illegible.

x Interventions on the product have been made by an unauthorized person.

x The product has been subjected to abnormal or improper use.

x The product has been damaged by external factors such as lightning, over-voltage, moisture,

accidental damage, improper care as well as all Acts of God.

This present warranty does not affect the consumer rights that you may have under the laws in effect in your

country.

Important:

Should you return the product to the after-sales department, please ensure that you return as well all the

elements and accessories originally supplied with the product.

D160-D160A

D210-D210A

253447632A

Dépliant LU D160_D210_A.fm Page 2 Samedi, 20. décembre 2008 11:35 11

Product specificaties

Merk:	Sagemcom
Categorie:	Draadloze DECT telefoons
Model:	D210A

Heb je hulp nodig?

Als je hulp nodig hebt met Sagemcom D210A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Draadloze DECT telefoons Sagemcom

Sagemcom D780 Handleiding

21 Juli 2023

Sagemcom D210A Handleiding

21 Juli 2023

Sagemcom D160A Handleiding

21 Juli 2023

Sagemcom D160 Handleiding

21 Juli 2023

Sagemcom CC220R Handleiding

21 Juli 2023

Sagemcom D17T Handleiding

21 Juli 2023

Handleiding Draadloze DECT telefoons

Nieuwste handleidingen voor Draadloze DECT telefoons

Amplicomms BigTel 1502 Handleiding

11 November 2023

IDECT X2i Handleiding

16 Oktober 2023

IDECT X3i Handleiding

16 Oktober 2023

ITT DP 27 Handleiding

10 Oktober 2023

ITT DP29 Handleiding

10 Oktober 2023

Orchid LR4620T Handleiding

4 Oktober 2023

Sweex IP004 Handleiding

27 September 2023

Mitel 5224 Handleiding

15 September 2023

Phonak Dect II Handleiding

10 September 2023

Auro DECT 5011 Handleiding

6 September 2023