Ryobi P262 Handleiding
Ryobi
Schroefmachine
P262
Lees hieronder de đ handleiding in het Nederlandse voor Ryobi P262 (36 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/36
OPERATORâS MANUAL
MANUEL DâUTILISATION
MANUAL DEL OPERADOR
7-1/4 in. ONE+ 18V BRUSHLESS
CIRCULAR SAW
SCIE CIRCULAIRE Ă MOTEUR SANS
BALAI DE 184 mm (7-1/4 po) DE 18 V ONE+
SIERRA CIRCULAR SIN ESCOBILLAS
DE 184 mm (7-1/4 pulg.) DE ONE+ 18 V
PBLCS300
WARNING: To reduce the
risk of injury, the user must read and
understand the operatorâs manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
lâutilisateur doit lire et veiller Ă bien
comprendre le manuel dâutilisation avant
dâemployer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RĂFĂRENCE
INCLUDES: Circular saw, 7-1/4 in. blade,
blade wrench, vacuum attachment, screw,
operatorâs manual
TABLE OF CONTENTS
îGeneral Power Tool Safety
Warnings ........................................ 2-3
îCircular Saw Safety Warnings 3-4 ........
îSymbols 5 ..............................................
îFeatures 6 ..............................................
îAssembly 6-7 ........................................
îOperation 7-10 ......................................
îAdjustments 11 .....................................
îAccessories 11 ......................................
îMaintenance 12 .....................................
îTroubleshooting 12 ................................
îIllustrations 13-15 .................................
îParts Ordering/Service Back Page .......
INCLUT : Scie circulaire, lame de 184îmm
(7-1/4 po), clé de lame, accessoire
dâaspiration, vis manuel dâutilisation
TABLE DES MATIĂRES
îAvertissements de sĂ©curitĂ© relatives
aux outils Ă©lectriques ..................... 2-3
îAvertissements de sĂ©curitĂ© relatifs
au scie circulaire ............................ 3-5
îSymboles 5 ............................................
îCaractĂ©ristiques 6 .................................
îAssemblage 6-7 ....................................
îUtilisation 7-10 ......................................
îRĂ©glages 11 ...........................................
îAccessoires 12 ......................................
îEntretien 12 ...........................................
îDĂ©pannage 12 .......................................
îIllustrations 13-15 .................................
îCommande de piĂšces/
réparation ..........................Page arriÚre
INCLUYE: Sierra circular, hoja de 184îmm
(7-1/4 pulg.), llave de la hoja, accesorio de
aspiradora, tornillo, manual del operador
ĂNDICE DE CONTENIDO
îAdvertencias de seguridad
para herramientas eléctricas .......... 2-3
îAdvertencias de seguridad
sierra circular .................................. 3-5
îSĂmbolos 5 ............................................
îCaracterĂsticas....................................6
îArmado 6-7 ...........................................
îFuncionamiento 7-10 ............................
îAjustes 11 ..............................................
îAccesorios 12 ........................................
îMantenimiento 12 ..................................
îCorrecciĂłn de problemas 12 .................
îIlustraciones 13-15 ...............................
îPedidos de piezas/
servicio .......................... PĂĄg. posterior
2 - English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings, instructions, illustrations
and speciïŹcations provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, ïŹre and/or serious injury.
Save all warnings and instructions for future reference.
The term âpower toolâ in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
îKeep work area clean and well lit. Cluttered or dark
areas invite accidents.
îDo not operate power tools in explosive atmospheres,
such as in the presence of ïŹammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
îKeep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
îPower tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. UnmodiïŹed plugs and
matching outlets will reduce risk of electric shock.
îAvoid body contact with earthed or grounded surfac-
es, such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
îDo not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
îDo not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
îWhen operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
îIf operating a power tool in a damp location is un-
avoidable, use a ground fault circuit interrupter (GFCI)
protected supply. Use of a GFCI reduces the risk of
electric shock.
îUse this product only with batteries and chargers
listed in tool/appliance/battery pack/charger correla-
tion supplement 987000-432.
PERSONAL SAFETY
îStay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the inïŹuence of drugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
îUse personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
îPrevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool. Car-
rying power tools with your ïŹnger on the switch or energiz-
ing power tools that have the switch on invites accidents.
îRemove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
îDo not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
îDress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught
in moving parts.
îIf devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
îDo not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe
injury within a fraction of a second.
îDo not wear loose clothing or jewelry. Contain long hair.
Loose clothes, jewelry, or long hair can be drawn into air vents.
îDo not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER TOOL USE AND CARE
îDo not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
îDo not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
îDisconnect the plug from the power source and/
or remove the battery pack, if detachable, from the
power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power
tool accidentally.
îStore idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
îMaintain power tools and accessories. Check for
misalignment or binding of moving parts, break-
age of parts and any other condition that may
3 - English
GENERAL POWER TOOL SAFETY WARNINGS
CIRCULAR SAW SAFETY WARNINGS
affect the power toolâs operation. If damaged,
have the power tool repaired before use. Many ac-
cidents are caused by poorly maintained power tools.
îKeep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
îUse the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
îKeep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
BATTERY TOOL USE AND CARE
îRecharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of ïŹre when used with
another battery pack.
îUse power tools only with speciïŹcally designated bat-
tery packs. Use of any other battery packs may create
a risk of injury and ïŹre.
îWhen battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make
a connection from one terminal to another. Shorting
the battery terminals together may cause burns or a ïŹre.
îUnder abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, ïŹush with water. If liquid contacts eyes, ad-
ditionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
îDo not use a battery pack or tool that is damaged or
modiïŹed. Damaged or modiïŹed batteries may exhibit
unpredictable behavior resulting in ïŹre, explosion or risk
of injury.
îDo not expose a battery pack or tool to ïŹre or exces-
sive temperature. Exposure to ïŹre or temperature above
265° F may cause explosion.
îFollow all charging instructions and do not charge the
battery pack or tool outside the temperature range
speciïŹed in the instructions. Charging improperly or at
temperatures outside the speciïŹed range may damage
the battery and increase the risk of ïŹre.
SERVICE
îHave your power tool serviced by a qualiïŹed repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
îNever service damaged battery packs. Service of bat-
tery packs should only be performed by the manufacturer
or authorized service providers.
CUTTING PROCEDURES
DANGER:
Keep hands away from cutting area and the blade.
Keep your second hand on auxiliary handle, or motor
housing. If both hands are holding the saw, they cannot
be cut by the blade.
îDo not reach underneath the workpiece. The guard
can not protect you from the blade below the workpiece.
îAdjust the cutting depth to the thickness of the
workpiece. Less than a full tooth of the blade teeth
should be visible below the workpiece.
îNever hold the workpiece in your hands or across your
leg while cutting. Secure the workpiece to a stable
platform. It is important to support the work properly to
minimize body exposure, blade binding, or loss of control.
îHold the power tool by insulated gripping surfaces,
when performing an operation where the cutting tool
may contact hidden wiring.
Contact with a âliveâ wire will
also make exposed metal parts of the power tool âliveâ
and could give the operator an electric shock.
îWhen ripping, always use a rip fence. This improves the
accuracy of cut and reduces the chance of blade binding.
îAlways use blades with correct size and shape (dia-
mond versus round) of arbor holes. Blades that do
not match the mounting hardware of the saw will run
off-center, causing loss of control.
îNever use damaged or incorrect blade washers or
bolt. The blade washers and bolt were specially designed
for your saw, for optimum performance and safety of
operation.
KICKBACK CAUSES AND RELATED
WARNINGS
îKickback is a sudden reaction to a pinched, jammed or
misaligned saw blade, causing an uncontrolled saw to lift
up and out of the workpiece toward the operator;
îWhen the blade is pinched or jammed tightly by the kerf
closing down, the blade stalls and the motor reaction
drives the unit rapidly back toward the operator;
îIf the blade becomes twisted or misaligned in the cut,
the teeth at the back edge of the blade can dig into the
top surface of the wood causing the blade to climb out
of the kerf and jump back toward the operator.
Product specificaties
| Merk: | Ryobi |
| Categorie: | Schroefmachine |
| Model: | P262 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ryobi P262 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schroefmachine Ryobi
5 November 2024
3 November 2024
3 November 2024
23 Augustus 2024
23 Augustus 2024
23 Augustus 2024
23 Augustus 2024
22 Augustus 2024
4 Juni 2023
5 Mei 2023
Handleiding Schroefmachine
- Schroefmachine Bosch
- Schroefmachine Panasonic
- Schroefmachine AEG
- Schroefmachine DeWalt
- Schroefmachine Basetech
- Schroefmachine Batavia
- Schroefmachine Bavaria
- Schroefmachine Bruder Mannesmann
- Schroefmachine Dremel
- Schroefmachine Easymaxx
- Schroefmachine Einhell
- Schroefmachine Elu
- Schroefmachine Fein
- Schroefmachine Ferm
- Schroefmachine Festool
- Schroefmachine Goon
- Schroefmachine Greenworks
- Schroefmachine Gude
- Schroefmachine Hikoki
- Schroefmachine Hitachi
- Schroefmachine Ingersoll Rand
- Schroefmachine Kawasaki
- Schroefmachine Kress
- Schroefmachine Laserliner
- Schroefmachine Makita
- Schroefmachine Maktec
- Schroefmachine Matrix
- Schroefmachine Metabo
- Schroefmachine Milwaukee
- Schroefmachine Parkside
- Schroefmachine Powerfix
- Schroefmachine Powerplus
- Schroefmachine Silverline
- Schroefmachine Skil
- Schroefmachine Stanley
- Schroefmachine Toolcraft
- Schroefmachine Toolland
- Schroefmachine Trotec
- Schroefmachine Velleman
- Schroefmachine Vonroc
- Schroefmachine Westfalia
- Schroefmachine Wiha
- Schroefmachine Worx
- Schroefmachine Omega
- Schroefmachine Ozito
- Schroefmachine Black And Decker
- Schroefmachine Steren
- Schroefmachine Urrea
- Schroefmachine Cocraft
- Schroefmachine Meec Tools
- Schroefmachine Senco
- Schroefmachine Genesis
- Schroefmachine Hilti
- Schroefmachine Facom
- Schroefmachine Kraftwerk
- Schroefmachine EMOS
- Schroefmachine Cotech
- Schroefmachine Power Craft
- Schroefmachine Tacklife
- Schroefmachine Truper
- Schroefmachine Fieldmann
- Schroefmachine Mafell
- Schroefmachine Carrera
- Schroefmachine Biltema
- Schroefmachine Porter-Cable
- Schroefmachine Beta
- Schroefmachine Dedra
- Schroefmachine MSW
- Schroefmachine Sthor
- Schroefmachine Craftsman
- Schroefmachine Chamberlain
- Schroefmachine Chicago Pneumatic
- Schroefmachine Alpha Tools
- Schroefmachine Hazet
- Schroefmachine Yato
- Schroefmachine Abac
- Schroefmachine Meister Craft
- Schroefmachine StarTech.com
- Schroefmachine Park Tool
- Schroefmachine Pansam
- Schroefmachine Gedore
- Schroefmachine Netter Vibration
- Schroefmachine SW-Stahl
- Schroefmachine Cleco
- Schroefmachine Einhell Bavaria
- Schroefmachine Prowork
- Schroefmachine Proviel
- Schroefmachine WeidmĂŒller
- Schroefmachine Wera
- Schroefmachine Rodcraft
- Schroefmachine Bavaria By Einhell
- Schroefmachine TAURUS Titanium
Nieuwste handleidingen voor Schroefmachine
23 November 2024
23 November 2024
23 November 2024
23 November 2024
20 November 2024
19 November 2024
19 November 2024
19 November 2024
17 November 2024
17 November 2024