Ryobi PCL250 Handleiding
Ryobi
Schroefmachine
PCL250
Bekijk gratis de handleiding van Ryobi PCL250 (24 pagina’s), behorend tot de categorie Schroefmachine. Deze gids werd als nuttig beoordeeld door 77 mensen en kreeg gemiddeld 5.0 sterren uit 39 reviews. Heb je een vraag over Ryobi PCL250 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/24
General Power Tool
Safety Warnings ............................. 2-3
Impact Wrench Safety Warnings ........ 4
Symbols ..............................................5
Features ..............................................5
Assembly ............................................ 6
Operation ........................................ 6-7
Maintenance ....................................... 8
Illustrations .........................................9
Parts Ordering and
Service ................................Back page
Avertissements de sécurité générales
relatives aux outils électriques ....... 2-3
Avertissements de sécurité relatifs
au clé à chocs .................................... 4
Symboles ............................................5
Caractéristiques .................................5
Assemblage ........................................6
Utilisation ....................................... 6-7
Entretien .............................................8
Illustrations .........................................9
Commande de pièces et
dépannage ........................Page arrière
Advertencias de seguridad
para herramientas eléctrica ........... 2-3
Advertencias de seguridad
destornillador de impacto ................. 4
Símbolos ........................................... 5
Características .................................. 5
Armado ............................................. 6
Funcionamiento ............................. 6-7
Mantenimiento .................................. 8
Illustraciones ..................................... 9
Pedidos de piezas y
servicio .........................Pág. posterior
WARNING:
To reduce the risk of injury, the user
must read and understand the opera-
tor’s manual before using this product.
AVERTISSEMENT :
Pour réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien com-
prendre le manuel d’utilisation avant
d’utiliser ce produit.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el
usuario debe leer y comprender el
manual del operador antes de usar este
producto.
TABLE OF CONTENTS TABLE DES MATIÈRES ÍNDICE DE CONTENIDO
SAVE THIS MANUAL
FORFUTUREREF ER ENCE
GUARDE ESTE MANUAL
PARAFUTURASCONSULTAS
CONSERVER CE MANUEL
POURFUTURERÉFÉRENCE
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
3/8 in. 18 VOLT
IMPACT WRENCH
CLÉ À CHOCS
9.5 mm (3/8 po) 18 V
LLAVE DE IMPACTO
9.5 mm (3/8 pulg.) 18 V
PCL250
2 - English
WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric
shock.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
Use this product only with batteries and chargers
listed in tool/appliance/battery pack/charger
correlation supplement 987000-432.
PERSONAL SAFETY
Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the influence of drugs, alcohol or
medication. A moment of inattention while operating
power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energizing power tools that have the switch
on invites accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry.
Keep your hair and clothing away from moving parts.
Loose clothes, jewelry or long hair can be caught in
moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
Do not wear loose clothing or jewelry. Contain long hair.
Loose clothes, jewelry, or long hair can be drawn into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
GENERAL POWER TOOL SAFETY WARNINGS
Product specificaties
| Merk: | Ryobi |
| Categorie: | Schroefmachine |
| Model: | PCL250 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ryobi PCL250 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schroefmachine Ryobi
13 Mei 2025
10 Februari 2025
15 November 2024
5 November 2024
3 November 2024
3 November 2024
23 Augustus 2024
23 Augustus 2024
23 Augustus 2024
23 Augustus 2024
Handleiding Schroefmachine
- Powerplus
- Bruder Mannesmann
- Silverline
- Kress
- Velleman
- Hikoki
- Hilti
- Porter-Cable
- TAURUS Titanium
- Urrea
- Metabo
- Panasonic
- Kawasaki
- Dedra
- Truper
Nieuwste handleidingen voor Schroefmachine
8 September 2025
7 September 2025
7 September 2025
2 September 2025
2 September 2025
2 September 2025
2 September 2025
2 September 2025
1 September 2025
1 September 2025