Russound ALT-126R Handleiding

Russound Controller ALT-126R

Lees hieronder de 📖 handleiding in het Nederlandse voor Russound ALT-126R (12 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/12
ALT-126R
Volume Control
Installation Manual
2Russound ALT-126R Installation Manual
Safety Instructions
1. Read Instructions - All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future
reference.
3. Heed Warnings - All warnings on the appliance in the operating instructions should be
adhered to.
4. Follow Instructions - Follow all operating and user instructions.
5. Water and Moisture - The appliance should not be used near water; for example, near a
bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
6. Wall Mounting - The appliance should be mounted to a wall as recommended by the
manufacturer.
7. Heat - The appliance should be situated away from heat sources such as radiators, heat
registers, stoves, or other appliances (including ampli ers) that produce heat.
8. Power Sources - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
9. Grounding or Polarization - Precaution should be taken so that the grounding or polarization
means of an appliance is not defeated.
10. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not
spilled into the enclosure through the openings.
11. Damage Requiring Ser vice - The appliance should be ser viced by quali ed ser vice personnel when:
The power supply cord or the plug has been damaged; Objects have fallen, liquid has been
spilled into the appliance; The appliance has been exposed to rain; The appliance does
not appear to operate normally; or The appliance has been dropped or the enclosure is
damaged.
12. Servicing - The user should not attempt to service the appliance beyond that described in the
operating instructions. All other servicing should be referred to quali ed service personnel.
13. Care – From time to time you should wipe o the front panel with a soft dry cloth.
SAFETY INSTRUCTIONS
3
Russound ALT-126R Installation Manual
PRODUCT OVERVIEW
Introduction
The ALT-126R UltraMatch™ Volume Control is a wall-mounted standard or Decora® style stereo
speaker-level 12-step attenuator. It connects between the speaker outputs of an ampli er/receiver
and a pair (or multiple pairs) of speakers. The ALT-126R adjusts volume level by attenuating the
ampli er signal output of the ALT-126R to the speakers. It is manufactured using a high-quality
autoformer design for long life, excellent frequency response, no heat build-up, and maximum
power transfer from the ampli er to the speakers.
The UltraMatchâ„¢ designation means the ALT-126R can match the minimum output impedance of
the ampli er/receiver, in addition to adjusting volume. It eliminates the need for a speaker selector
or other impedance matching equipment. When the impedance matching switch is in 1X position
the volume control can be used as a standard control. The 2X, 4X, and 8X settings allow it to be
used as an UltraMatchâ„¢ control.
Considerations
Ampli er power rating - Make sure the ampli er has 20 watts per channel for each pair of
speakers to be connected.
How many ALT-126R - An UltraMatchâ„¢ volume control should be used for each pair of speakers
(however, up to 2 pairs of speakers can be used on each control).
Speaker rating - A minimum 4-ohm speaker load can be connected to the Output of each
UltraMatchâ„¢ volume control.
Impedance matching switch - Each ALT-126R in the system must have the impedance matching
switch positioned correctly (1X, 2X, etc.). Switch must be set BEFORE the ALT-126R is installed.
Installation location - Typical locations for ALT-126R installation include proximity to other wall
controls, near a desk or next to entrances.
Proper impedance matching switch position for UltraMatchâ„¢ Impedance Matching - ALT-126R
impedance matching switch position must be choosen to correctly multiply the impedance of the
system to a level that equals or exceeds the minimum impedance of the ampli er.
By determining the impedance capability of the ampli er with a few simple calculations, you can
determine the number of speakers the system can safely operate. The impedance matching switch
position can then be determined by using the charts on the next pages.

Product specificaties

Merk: Russound
Categorie: Controller
Model: ALT-126R

Heb je hulp nodig?

Als je hulp nodig hebt met Russound ALT-126R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Controller Russound

Russound

Russound WALTX-2 Handleiding

6 April 2024
Russound

Russound ALT-126R Handleiding

10 Augustus 2023

Handleiding Controller

Nieuwste handleidingen voor Controller

Smart-AVI

Smart-AVI EZWALL-PLUS 2X2 Handleiding

20 November 2024
Gamesir

Gamesir F4 Falcon Handleiding

19 November 2024
HQ Power

HQ Power HQDB10002 Handleiding

18 November 2024
Ltech

Ltech CHLSC43 Handleiding

17 November 2024
IVT

IVT DR-2000 Handleiding

17 November 2024
Speed-Link

Speed-Link RAIT SL-650110-BK Handleiding

16 November 2024
Genesis

Genesis MANGAN 400 Handleiding

15 November 2024
Steelseries

Steelseries Stratus Duo Handleiding

14 November 2024
Thrustmaster

Thrustmaster TM Flying Clamp Handleiding

14 November 2024
MOZA

MOZA Hand Brake Handleiding

14 November 2024