Russell Hobbs Carving 13892 Handleiding
Russell Hobbs
Mes
Carving 13892
Lees hieronder de đ handleiding in het Nederlandse voor Russell Hobbs Carving 13892 (8 pagina's) in de categorie Mes. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8

instructions

Read the instructions and keep them safe. If you pass the appliance on, pass on the
instructions too. Remove all packaging, but keep it till you know the appliance works.
important safeguards
Follow basic safety precautions, including:
1 This appliance must only be used by a responsible adult.
2 Donât put the handle in liquid, donât use it in a bathroom, near water,
3 Donât use the knife in the presence of children. Their movements are
unpredictable, they may jog your arm or bump into you inadvertently.
4 Unplug the knife from the power socket before attaching or removing
blades and before cleaning.
5 After use, clean the blades, replace them in their protective sleeve, and store them
out of the reach of children.
6 The blades are extremely sharp, donât leave them lying around where they may be
touched accidentally by you or anyone else.
7 Donât try to cut bone or frozen food. The blades may slip and cause serious injury. It
may also damage the blades.
8 Donât use the other hand to steady the food being cut. Use a carving fork.
9 Route the cable so that it canât catch on anything or get in the way of the blades
while in use.
10 Donât apply pressure to the knife and donât use a sawing action. Simply guide it
through the food, letting the motor do all the work.
11 When you ďŹnish, unplug the knife ďŹrst, then remove the blades.
12 Donât leave the knife unattended, especially where children may reach it.
13 Donât use the same set of blades on raw and cooked meat without washing them
thoroughly between uses.
14 Use a cutting board to avoid damage to the blades and to the work surface.
15 Donât use the knife for any purpose other than cutting food.
16 Donât let the cable touch hot surfaces.
17 Donât run the knife continuously for more than 5 minutes, to avoid overheating.
18 Donât use the knife after it malfunctions or has been damaged in any way.
19 If the cable is damaged, return the knife, in order to avoid hazard.
household use only
2

3
preparation
1 Clear a space on your worktop or table so that the knife canât hit anything and the
cable canât catch on anything while youâre using it.
2 Put the cutting board on the worktop and have the carving fork within easy reach.
3 Remove all packaging from the food. Donât use the knife to cut the packaging, you
may damage the blades.
4 Position the food on the cutting board.
ďŹtting the blades
5 Keep the protective sleeve on the blades.
6 Hold the blades by the ďŹnger grips.
7 Insert the free ends of the blades into the slots on the front of the body
and push gently till they click into place.
8 Lay the knife down on or near the cutting board.
9 Remove the protective sleeve from the blades.
10 Plug the knife into the power socket. If necessary,
switch the socket on.
11 Steady the joint with the carving fork.
cutting
12 Hold the knife as shown here.
13 Press the operating switch to set the blades
in motion. The switch is spring-loaded, the
knife will operate only while you hold the
switch down.
14 Cut away from your body.
15 Use a carving fork to steady the joint being cut â donât use your other hand.
16 Donât try to reposition the joint without putting the knife down ďŹrst.
17 If the joint needs repositioning, release the switch, set the knife down, move the
joint, steady it with the carving fork â then pick the knife up again.
18 When you ďŹnish, or if you need to stop cutting to do anything else, release the
switch, set the knife down, and unplug it.
19 Donât use the knife for more than 15 minutes in any one session.
removing the blades
20 Release the switch, set the knife down, and unplug it.
21 Keep your hand away from the operating switch.
22 Press the blade release button.
23 Hold the blades by the ďŹnger grips and
gently pull them out of their slots.
23 Keep your ďŹngers away from the edges of the blades.
cleaning the blades
25 One of the blades has a âkeyholeâ slot, the other has a rivet. To separate the blades,
slide the rivet along the slot to the large hole.
26 Wash the blades in hot soapy water, rinse, dry
thoroughly, then rejoin them and replace them in
their protective sleeve.
Product specificaties
Merk: | Russell Hobbs |
Categorie: | Mes |
Model: | Carving 13892 |
Heb je hulp nodig?
Als je hulp nodig hebt met Russell Hobbs Carving 13892 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Mes Russell Hobbs

22 Maart 2023

22 November 2022
Handleiding Mes
- Mes IKEA
- Mes Kenwood
- Mes Krups
- Mes Tefal
- Mes Bartscher
- Mes BeamZ
- Mes Bestron
- Mes Domo
- Mes Einhell
- Mes Ernesto
- Mes Exquisit
- Mes Fagor
- Mes Fritel
- Mes G3 Ferrari
- Mes Gastroback
- Mes Graef
- Mes Hama
- Mes HQ Power
- Mes Kalorik
- Mes Krontaler
- Mes Livoo
- Mes Moulinex
- Mes Primo
- Mes Princess
- Mes Rommelsbacher
- Mes Ryobi
- Mes Severin
- Mes Silvercrest
- Mes Steba
- Mes Sunbeam
- Mes Swan
- Mes Team
- Mes Toolcraft
- Mes Tristar
- Mes Wolf
- Mes Oster
- Mes Crivit
- Mes Black And Decker
- Mes Clatronic
- Mes Continental Edison
- Mes Cuisinart
- Mes Hamilton Beach
- Mes Nutrichef
- Mes Proctor Silex
- Mes Waring Commercial
- Mes Brentwood
- Mes Leatherman
- Mes Victorinox
- Mes Karma
- Mes Hazet
- Mes N8WERK
- Mes WĂźsthof
- Mes Girmi
- Mes Underwater Kinetics
Nieuwste handleidingen voor Mes

19 Februari 2025

19 Februari 2025

19 Februari 2025

19 Februari 2025

19 Februari 2025

19 Februari 2025

19 Februari 2025

19 Februari 2025

19 Februari 2025

19 Februari 2025