Rotel RSX-1560 Handleiding

Rotel Receiver RSX-1560

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Rotel RSX-1560 (54 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/54
Ownerā€™s Manual
RSX-1560
Surround Sound Receiver
Register your product at
www.Rotel.com/register
RSX-1560 English v2.indd 1 29/9/08 15:13:46
2RSX-1560 Surround Sound Receiver
Rotel products are designed to comply with international
directives on the Restriction of Hazardous Substances
(RoHS) in electrical and electronic equipment and the
disposal of Waste Electrical and Electronic Equipment
(WEEE). The crossed wheelie bin symbol indicates
compliance and that the products must be appropriately
recycled or processed in accordance with these directives.
This symbol means that this unit is double insulated. An
earth or ground connection is not required.
RSX-1560 English v2.indd 2 29/9/08 15:13:56
3
English
Notice
The COMPUTER I/O connection should be handled by authorized persons only.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
ā€¢ Reorient or relocate the receiving antenna.(TV, radio, etc.)
ā€¢ Increase the separation between the equipment and receiver
ā€¢ Connect the equipment to an outlet on circuit different from that to which the receiver is
connected.
ā€¢ Consult the dealer or an experienced radio/TV technician for additional help.
Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following to
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE TO CATV SYSTEM INSTALLER: Call the CATV system or antenna installerā€™s attention to
Article 820-40 of the NEC. This provides guidelines for proper grounding and, in particular, speciļ¬es
that the cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical. See installation diagram.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against interference in a residential installation. This equipment generates and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause interference to radio or TV communications. There is no guarantee that interference will
not occur in a particular installation. If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off and on, try to correct the
interference by one or more of the following measures:
ā€¢ Reorient or relocate the receiving antenna.
ā€¢ Increase the separation between the unit and the television tuner.
ā€¢ Connect the unit to an AC power outlet on a different electrical circuit.
ā€¢ Consult your authorized Rotel retailer for assistance.
Important Safety Instructions
WARNING: There are no user serviceable parts inside. Refer all servicing to qualiļ¬ed service
personnel.
WARNING: To reduce the risk of ļ¬re or electric shock, do not expose the unit to moisture or water.
Do not expose the unit to dripping or splashing. Do not place objects ļ¬lled with liquids, such as
vases, on the unit. Do not allow foreign objects to get into the enclosure. If the unit is exposed to
moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from
the wall. Take the unit to a qualiļ¬ed service person for inspection and necessary repairs.
Read all the instructions before connecting or operating the unit.
Keep this manual so you can refer to these safety instructions.
Heed all warnings and safety information in these instructions and on the product itself. Follow all
operating instructions.
Clean the enclosure only with a dry cloth or a vacuum cleaner.
Do not use this unit near water.
You must allow a minimum 10 cm or 4 inches of unobstructed clearance around the unit. Do not
place the unit on a bed, sofa, rug, or similar surface that could block the ventilation openings. If
the unit is placed in a bookcase or cabinet, there must be ventilation of the cabinet to allow proper
cooling.
Keep the component away from radiators, heat registers, stoves, or any other appliance that
produces heat.
The unit must be connected to a power supply only of the type and voltage speciļ¬ed on the rear
panel. (USA: 120 V/60Hz, EC: 230V/50Hz)
Connect the component to the power outlet only with the supplied power supply cable or an exact
equivalent. Do not modify the supplied cable. A polarized plug has two blades, with one wider than
the other. A grounding plug has two blades plus a third grounding prong. These are provided for
your safety. Do not defeat grounding and/or polarization safety provisions. If the supplied plug
does not ļ¬t your outlet, please consult an electrician for replacement of the obsolete outlet. Do not
use extension cords.
The main plug of the power cordset is a disconnect device of the apparatus. In order to completely
disconnect the apparatus from the supply mains, the main plug of the power cordset should be
unplugged from the mains (AC) outlet. The stand-by LED indicator will not be lit up to show the
power cord is unplugged. The disconnect device should remain readily operable.
Do not route the power cord where it will be crushed, pinched, bent, exposed to heat, or damaged in
any way. Pay particular attention to the power cord at the plug and where the cord exits the unit.
The power cord should be unplugged from the wall outlet during a lightning storm or if the unit is to
be left unused for a long period.
Use only accessories speciļ¬ed by the manufacturer.
Use only with a cart, stand, rack, bracket or shelf system recommended by Rotel. Use caution when
moving the unit in a stand or rack to avoid injury from a tip-over.
Use Class 2 wiring for speaker connections to ensure proper installation and minimize the risk of
electrical shock.
Immediately stop using the component and have it inspected and/or serviced by a qualiļ¬ed service
agency if:
ā€¢ The power supply cord or plug has been damaged.
ā€¢ Objects have fallen or liquid has been spilled into the unit.
ā€¢ The unit has been exposed to rain.
ā€¢ The unit shows signs of improper operation
ā€¢ The unit has been dropped or damaged in any way
WARNING: The master power switch is located on the rear panel. The unit must be located in the
open area allowing unobstructed access to the main power switch.
RSX-1560 English v2.indd 3 29/9/08 15:13:59


Product specificaties

Merk: Rotel
Categorie: Receiver
Model: RSX-1560

Heb je hulp nodig?

Als je hulp nodig hebt met Rotel RSX-1560 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Rotel

Handleiding Receiver

Nieuwste handleidingen voor Receiver