Rotel RSX-03 Handleiding

Rotel Receiver RSX-03

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Rotel RSX-03 (44 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/44
Owner’s manual
RSX-03
Surround Sound Receiver
STANDBY
This symbol means that this unit is double insulated. An
earth or ground connection is not required.
ξ˜žξ˜€ξ˜‘ξ˜ξ˜€ξ™ƒξ™
ξ˜žξ˜€ξ˜”ξ˜€ξ™‰ξ™Ž
ξ˜žξ˜€ξ˜‘ξ˜ξ˜€ξ™ƒξ™
ξ˜žξ˜€ξ˜”ξ˜€ξ™‰ξ™Ž
ξ˜žξ˜€ξ˜‘ξ˜ξ˜€ξ™ƒξ™
ξ˜žξ˜€ξ˜”ξ˜€ξ™‰ξ™Ž
ξ˜žξ˜€ξ˜‘ξ˜ξ˜€ξ™ƒξ™ ξ˜žξ˜€ξ˜”ξ˜€ξ™‰ξ™Ž
Rotel products are designed to comply with international directives on the Re-
striction of Hazardous Substances (RoHS) in electrical and electronic equipment
and the disposal of Waste Electrical and Electronic Equipment (WEEE). The
crossed wheelie bin symbol indicates compliance and that the products must
be appropriately recycled or processed in accordance with these directives.
Notice
The should be handled by authorized COMPUTER I/O connection
person only.
FCC Information
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in ac-
cordance with the instruction, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a par-
ticular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
β€’ Reorient or relocate the receiving antenna.(TV, radio, etc.)
β€’ Increase the separation between the equipment and receiver
β€’ Connect the equipment to an outlet on circuit different from that to
which the receiver is connected.
β€’ Consult the dealer or an experienced radio/TV technician for addi-
tional help.
Caution
This device complies with part 15 of the FCC Rules operation is subject
to the following to conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE TO CATV SYSTEM INSTALLER: Call the CATV system or antenna
installer’s attention to Article 820-40 of the NEC. This provides guidelines
for proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close to
the point of cable entry as practical. See installation diagram.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against interference
in a residential installation. This equipment generates and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause interference to radio or TV communications.
There is no guarantee that interference will not occur in a particular in-
stallation. If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off and on,
try to correct the interference by one or more of the following measures:
β€’ Reorient or relocate the receiving antenna.
β€’ Increase the separation between the unit and the television tuner.
β€’ Connect the unit to an AC power outlet on a different electrical cir-
cuit.
β€’ Consult your authorized Rotel retailer for assistance.
Important Safety Instructions
WARNING: There are no user serviceable parts inside. Refer all servic-
ing to qualified service personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose
the unit to moisture or water. Do not expose the unit to dripping or splash-
ing. Do not place objects filled with liquids, such as vases, on the unit. Do
not allow foreign objects to get into the enclosure. If the unit is exposed
to moisture, or a foreign object gets into the enclosure, immediately dis-
connect the power cord from the wall. Take the unit to a qualified service
person for inspection and necessary repairs.
Read all the instructions before connecting or operating the component.
Keep this manual so you can refer to these safety instructions.
Heed all warnings and safety information in these instructions and on the
product itself. Follow all operating instructions.
Clean the enclosure only with a dry cloth or a vacuum cleaner.
Do not use this unit near water.
You must allow a minimum 10 cm or 4 inches of unobstructed
clearance around the unit. Do not place the unit on a bed, sofa, rug,
or similar surface that could block the ventilation openings. If the unit is
placed in a bookcase or cabinet, there must be ventilation of the cabinet
to allow proper cooling.
Keep the component away from radiators, heat registers, stoves, or any
other appliance that produces heat.
The unit must be connected to a power supply only of the type and voltage
specified on the rear panel. (USA: 120 V/60Hz, EC: 230V/50Hz)
Connect the component to the power outlet only with the supplied power
supply cable or an exact equivalent. Do not modify the supplied cable. A
polarized plug has two blades, with one wider than the other. A grounding
plug has two blades plus a third grounding prong. These are provided for
your safety. Do not defeat grounding and/or polarization safety provisions.
If the supplied plug does not fit your outlet, please consult an electrician
for replacement of the obsolete outlet. Do not use extension cords.
The main plug of the power cordset is a disconnect device of the appa-
ratus. In order to completely disconnect the apparatus from the supply
mains, the main plug of the power cordset should be unplugged from the
mains (AC) outlet. The stand-by LED indicator will not be lit up to show
the power cord is unplugged.
Do not route the power cord where it will be crushed, pinched, bent, ex-
posed to heat, or damaged in any way. Pay particular attention to the
power cord at the plug and where the cord exits the back of the unit.
The power cord should be unplugged from the wall outlet during a lightning
storm or if the unit is to be left unused for a long period of time.
Use only accessories specified by the manufacturer.
Use only with a cart, stand, rack, bracket or shelf system recommended
by Rotel. Use caution when moving the unit in a stand or rack to avoid
injury from a tip-over.
Use Class 2 wiring for speaker connections to ensure proper installation
and minimize the risk of electrical shock.
Immediately stop using the component and have it inspected and/or ser-
viced by a qualified service agency if:
β€’ The power supply cord or plug has been damaged.
β€’ Objects have fallen or liquid has been spilled into the unit.
β€’ The unit has been exposed to rain.
β€’ The unit shows signs of improper operation
β€’ The unit has been dropped or damaged in any way
WARNING: The master power switch is located on the rear panel. The
unit must be located in the open area allowing unobstructed access to
the main power switch.


Product specificaties

Merk: Rotel
Categorie: Receiver
Model: RSX-03

Heb je hulp nodig?

Als je hulp nodig hebt met Rotel RSX-03 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Rotel

Handleiding Receiver

Nieuwste handleidingen voor Receiver