Rotel RB-1572 V2 Handleiding

Rotel Receiver RB-1572 V2

Lees hieronder de 📖 handleiding in het Nederlandse voor Rotel RB-1572 V2 (48 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/48

www.Rotel.com/register

RB-1562 / RB-1572

Stereo Power Ampliﬁ ers

Ampliﬁ cateurs de puissance stéréophoniques

Stereo-Endstufen

Etapas de Potencia Estereofónicas

Finale di potenza stereo

Stereo Eindversterker

Stereoslutsteg

Стерео усилитель мощности

àÌÒÚÛÍˆËﬂ ÔÓÎ¸ÁÓ‚‡ÚÂÎﬂ

RB-1562 / RB-1572 Stereo Power Ampliﬁ ers

WARNING: The rear panel power cord connector is the mains

power disconnect device. The apparatus must be located in an

open area that allows access to the cord connector.

The unit must be connected to a power supply only of the type

and voltage specified on the rear panel. (USA: 120 V/60Hz,

EC: 230V/50Hz)

Connect the component to the power outlet only with the

supplied power supply cable or an exact equivalent. Do not

modify the supplied cable. A polarized plug has two blades, with

one wider than the other. A grounding plug has two blades plus

a third grounding prong. These are provided for your safety.

Do not defeat grounding and/or polarization safety provisions.

If the supplied plug does not fit your outlet, please consult an

electrician for replacement of the obsolete outlet. Do not use

extension cords.

The main plug of the power cordset is a disconnect device of the

apparatus. In order to completely disconnect the apparatus from

the supply mains, the main plug of the power cordset should

be unplugged from the mains (AC) outlet. The standby LED

indicator will not be lit up to show the power cord is unplugged.

The disconnect device shall remain readily operable.

Do not route the power cord where it will be crushed, pinched,

bent, exposed to heat, or damaged in any way. Pay particular

attention to the power cord at the plug and where the cord exits

the back of the unit.

The power cord should be unplugged from the wall outlet during

a lightning storm or if the unit is to be left unused for a long

period of time.

Use only accessories specified by the manufacturer.

Use only with a cart, stand, rack, bracket

or shelf system recommended by Rotel. Use

caution when moving the unit in a stand or

rack to avoid injury from a tip-over.

Use Class 2 wiring for speaker connections to ensure proper

installation and minimize the risk of electrical shock.

Immediately stop using the component and have it inspected

and/or serviced by a qualified service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

WARNING: There are no user serviceable parts inside. Refer

all servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do

not expose the unit to moisture or water. Do not expose the

unit to dripping or splashing. Do not place objects filled with

liquids, such as vases, on the unit. Do not allow foreign objects

to get into the enclosure. If the unit is exposed to moisture, or

a foreign object gets into the enclosure, immediately disconnect

the power cord from the wall. Take the unit to a qualified service

person for inspection and necessary repairs.

Read all the instructions before connecting or operating the

component.

Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions

and on the product itself. Follow all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

Do not use this unit near water.

You must allow a minimum 10 cm or 4 inches of

unobstructed clearance around the unit.

Do not place the unit on a bed, sofa, rug, or similar surface that

could block the ventilation openings. If the unit is placed in a

bookcase or cabinet, there must be ventilation of the cabinet to

allow proper cooling.

Keep the component away from radiators, heat registers, stoves,

or any other appliance that produces heat.

Rotel products are designed to comply with

international directives on the Restriction of

Hazardous Substances (RoHS) in electrical and

electronic equipment and the disposal of Waste

Electrical and Electronic Equipment (WEEE). The

crossed wheelie bin symbol indicates compliance

and that the products must be appropriately

recycled or processed in accordance with these

directives.

This symbol means that this unit is double

insulated. An earth connection is not required.

Important Safety Instructions

3RB-1562 / RB-1572

Figure 1: Controls and Connections

Commandes et branchements

Bedienelemente und Anschlüsse

Controles y Conexiones

Controlli e connessioni

De bedieningsorganen en de aansluitingen

Kontroller och anslutningar

Органы управления и разъемы

 

   

Note: The Left and Right speaker output terminals of the RB-1562 and RB-1572 are in different positions.

Product specificaties

Merk:	Rotel
Categorie:	Receiver
Model:	RB-1572 V2
Kleur van het product:	Zilver
Ingebouwd display:	Nee
Gewicht:	7800 g
Breedte:	431 mm
Diepte:	339 mm
Hoogte:	99 mm
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Gebruiksaanwijzing:	Ja
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Bedraad
Meegeleverde kabels:	AC
Bedoeld voor:	Thuis
Audio-uitgangskanalen:	2.0 kanalen
Frequentiebereik:	10 - 80000 Hz
Signaal/ruis-verhouding:	109 dB
Totale harmonische vervorming (THD):	0.03 procent
Rackcapaciteit:	2U
Stroomverbruik (typisch):	280 W
Input sensitiviteit:	0.0015 mV
Piekvermogen per kanaal:	500 W
Synchronisatie ingangsimpedantie:	8300 Ohm
Dempingsfactor:	400