Rotel RA-10 Handleiding

Rotel Receiver RA-10

Lees hieronder de 📖 handleiding in het Nederlandse voor Rotel RA-10 (58 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/58

RA-10

Stereo Integrated Ampliﬁer

Ampliﬁcateur Stéréo Intégré

Stereo-Vollverstärker

Ampliﬁcador Integrado Estereofónico

Ampliﬁcatore integrato stereo

Geïntegreerde Stereoversterker

Integrerad stereoförstärkare

Стерео интегрированный усилитель

Owner’s Manual

Manuel de l’utilisateur

Bedienungsanleitung

Manual de Instrucciones

Manuale di istruzioni

Gebruiksaanwijzing

Instruktionsbok

Инструкция пользователя

2RA-10 Stereo Integrated Ampliﬁer

Do not route the power cord where it will be crushed, pinched,

bent, exposed to heat, or damaged in any way. Pay particular

attention to the power cord at the plug and where the cord exits

the back of the unit.

The power cord should be unplugged from the wall outlet during

a lightning storm or if the unit is to be left unused for a long

period of time.

Use only accessories specified by the manufacturer.

Use only with a cart, stand, rack, bracket or shelf system recom-

mended by Rotel. Use caution when moving the unit in a stand or

rack to avoid injury from a tip-over.

Immediately stop using the component and have it inspected and/

or serviced by a qualified service agency if:

• Thepowersupplycordorplughasbeendamaged

• Objectshavefallenorliquidhasbeenspilledintotheunit

• Theunithasbeenexposedtorain

• Theunitshowssignsofimproperoperation

• Theunithasbeendroppedordamagedinanyway

Please use Class 2 Wiring when connecting the speaker terminals

of the unit to ensure proper insulation and minimize the risk of

electrical shock.

WARNING: There are no user serviceable parts inside. Refer all

servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not

expose the unit to moisture or water. Do not expose the unit to

dripping or splashing. Do not place objects filled with liquids, such

as vases, on the unit. Do not allow foreign objects to get into the

enclosure. If the unit is exposed to moisture, or a foreign object

gets into the enclosure, immediately disconnect the power cord from

the wall. Take the unit to a qualified service person for inspection

and necessary repairs.

Read all the instructions before connecting or operating the

component.

Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and

on the product itself. Follow all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

Do not use this unit near water.

You must allow a minimum 10 cm or 4 inches of

unobstructed clearance around the unit.

Do not place the unit on a bed, sofa, rug, or similar surface that

could block the ventilation openings. If the unit is placed in a

bookcase or cabinet, there must be ventilation of the cabinet to

allow proper cooling.

Keep the component away from radiators, heat registers, stoves,

or any other appliance that produces heat.

The unit must be connected to a power supply only of the type

and voltage specified on the rear panel. (USA: 120 V/60Hz, EC:

230V/50Hz)

Connect the component to the power outlet only with the supplied

power supply cable or an exact equivalent. Do not modify the

supplied cable. A polarized plug has two blades, with one wider than

the other. A grounding plug has two blades plus a third grounding

prong. These are provided for your safety. Do not defeat grounding

and/or polarization safety provisions. If the supplied plug does not

fit your outlet, please consult an electrician for replacement of the

obsolete outlet. Do not use extension cords.

The main plug of the power cordset is a disconnect device of the

apparatus. In order to completely disconnect the apparatus from

the supply mains, the main plug of the power cordset should be

unplugged from the mains (AC) outlet.The stand-by LED indica-tor

will not be lit up to show the power cord is unplugged. The disconnect

device shall remain readily operable.

Rotel products are designed to comply with

international directives on the Restriction of

Hazardous Substances (RoHS) in electrical and

electronic equipment and the disposal of Waste

Electrical and Electronic Equipment (WEEE). The

crossed wheelie bin symbol indicates compliance and

that the products must be appropriately recycled or

processed in accordance with these directives.

Important Safety Instructions

This symbol means that this unit is double insulated.

An earth connection is not required.

Place the unit on a ﬁxed, level surface strong enough

to support its weight. Do not place it on a moveable

cart that could tip over.

Figure 1: Controls and Connections

Commandes et branchements

Bedienelemente und Anschlüsse

Controles y Conexiones

Controlli e connessioni

De bedieningsorganen en aansluitingen

Kontroller och anslutningar

Органы управления и разъемы

1 2

3 5

4 6 7 8 9 0 - = q

w r t y u i o

INTEGRATED AMPLIFIER

MODEL NO. RA-10

POWER CONSUMPTION : 220W

SERIAL NO. RP-502

SPEAKER B

LEFTRIGHT

CLASS 2 WIRING

LEFTRIGHT

SPEAKER A

12V TRIGGER OUT

SPEAKER IMPEDANCE

A OR B - 40HMS MINIMUM

A AND B - 80HMS MININUM

PRE OUTTAPEAU X 2AU X 1TUNERCDPHONO

IN OUT

LEFT

RIGHT

GND

WARNING: TO REDUCE THE RISK OF THE FIRE OR ELECTRICAL SHOCK,

DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

DOUBLE INSULATION

When servicing

use only identical replacement parts.

Product specificaties

Merk:	Rotel
Categorie:	Receiver
Model:	RA-10
Kleur van het product:	Zilver
Gewicht:	5900 g
Breedte:	430 mm
Diepte:	342 mm
Hoogte:	72 mm
Stroomverbruik (in standby):	0.5 W
Audio-uitgangskanalen:	- kanalen
Frequentiebereik:	10 - 40000 Hz
Signaal/ruis-verhouding:	100 dB
Totale harmonische vervorming (THD):	0.03 procent
Stroomverbruik (typisch):	220 W
Input sensitiviteit:	150 mV
Piekvermogen per kanaal:	40 W
Synchronisatie ingangsimpedantie:	24000 Ohm
Dempingsfactor:	180
Output impedance:	470 Ohm
Uitgangsniveau:	1000 mV