Rossum Electro-Music Mob Of Emus Handleiding

Rossum Electro-Music Niet gecategoriseerd Mob Of Emus

Lees hieronder de 📖 handleiding in het Nederlandse voor Rossum Electro-Music Mob Of Emus (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

MOB OF EMUS

Polyfunctional Harmonic Sextet

What is this thing?

Mob of Emus is a ﬂexible music and sound

design tool that gives you six channels of

oscillators, noise sources, cyclical and 1-shot

modulators (including LFOs, envelopes, and

various other shapes), sample and holds,

slow random modulators, triggers, rhythm

patterns, and quantization (of both internal

and external signals) in pretty much any

combination (well, any combination of six

channels, anyway).

In addition to being able to independently

program the function of each individual

channel, Mob of Emus’ Hex mode provides

a macro control layer that allows you to

control all of its channels simultaneously

(while, in most cases, maintaining the

relationships of each channel’s independent

programming).

What’s more, Mob of Emus’ “harmonic”

control structure makes it extremely easy

to combine its oscillators into rich additive

timbres, to combine its LFOs into stacked

harmonic low frequency modulation waves,

and to create modulation sources and

triggers with intricate polyrhythmic patterns.

With an external trigger input, six CV inputs

that can operate in six dierent control

modes, six independent outputs, and an

assignable mix output, Mob of Emus can

operate as the heart of an almost unlimited

variety of patches.

And while Mob of Emus’ interface is, by

necessity, rather dense (given all it does),

its eight real-time controls have been

designed to give you immediate hands-on

access to a channel’s (or all six channels’)

key parameters, inviting (and rewarding)

exploration and improvisation.

Finally, Mob of Emus provides 12 preset

locations to save your favorite creations.

Installation

While all Rossum Electro-Music modules

are protected against reverse polarity,

care should still be taken to connect the

power cable correctly.

Plug the 16-pin connector into the

header on the rear of the module such

that the red stripe on the cable (the -12V

side) is on the same end of the header as

the “Red Stripe (-12V)” text on the PCB.

Mob of Emus requires a maximum of

130mA of +12V and 25mA of -12V.

We have included both M3 and M2.5 (for

vector rails) mounting screws. Use what

ﬁts your system. If rack rash is of concern

to you, use the included nylon washers

when mounting Mob of Emus in your

case.

Make some noise!

The quickest way to hear some of what

Mob of Emus can do is to check out

the Presets that come pre-loaded from

the factory. Refer to the Factory Presets

chapter in the manual for descriptions of

what they’re intended to do. Play around

with them.

Then read the manual. Seriously. You’ll be

glad you did.

Thanks for purchasing Mob of Emus. This

guide will get you to the point of creating

some interesting patches, as well as giving

you an overview of what Mob of Emus is

about. But since it does a more than may lot

be obvious from just looking at the panel,

to get the most out of it, you really need to

check out the full owners manual at:

www.rossum-electro.com/support/

documentation

Functional Overview

> MULTI In Hex Mode, control all

channels. Target parameters are as

labeled on the panel.

> FREQ Independently control the

frequency of all six channels.

> TRIG Independently trigger the

individual channels.

> GAIN Independently control the

output amplitude of individual

channels.

> WAVE Independently control the

wave shape of individual channels.

> QUANT Quantize external signals

patched to the CV inputs.

Real-Time Controls

The real-time controls function in a

primary mode (labeled in black) and in

one or two Option modes (Iabeled in

blue). Functions labeled in orange are

active in Hex Mode only.

In individual channel mode:

FREQ/FINE/SEMI Sets a channel’s

frequency over a range of +/- 2 octaves.

Option 1: Fine tune.

Option 2: Constrain to semitones.

OCTAVE/2X Sets a channel’s octave over

a range of +/- 5 octaves.

Option 1: Doubles range to +/- 10 octaves.

WAVE/ENV/PAT Selects a channel’s

waveshape.

Option 1: Selects from a second bank of

shapes, including envelopes.

Option 2: Selects from a third bank of

shapes, including rhythm patterns.

PHASE/SYNC/1S Sets a channel’s phase

oset, from 0–360 degrees.

Option 1: Enables hard sync, with

channel 1 as master.

Option 2: Sets a channel to 1-shot mode.

HARM#/SERIES Sets a frequency

multiplier of 1 to 16.

Option 1: Sets a frequency multiplier of

17 to 32.

Here’s a top-level overview of what Mob of Emus

is all about. Suce it to say that we can only hit

the highlights here. You’ll discover a lot more

magic in the full manual.

TAP/TRIG BUTTON Repeatedly tap to set

frequency. OPTION + TAP triggers all six channels

simultaneously.

TAP/TRIG JACK Mirrors the function of the

associated button or acts to trigger all six

channels.

HEX BUTTON Toggle Hex Mode (LED indicates

state). See back page for additional functions.

CV Inputs

Operate in one of six modes.

Select the mode by double-clicking and holding

OPTION and then clicking the desired preset

button.

VARIATION/WARP Osets the probability

that all channels will ratchet or drop a step.

Option 1: Warps each channel’s frequency

in the style of a frequency shifter. Just to

the right of center provides chorus-style

detuning. At full CCW, all channels swarm to

the frequency of channel 1.

QUANT/RND/DC Selects the scale

for the Mix output quantizer. Set fully

counterclockwise for no quantization.

Option 1: Adds random frequency variation

to all channel’s outputs.

Option 2: Add a DC oset (+/- 12 semitones)

to the Mix output.

Mixed Mode

When Hex mode is enabled and one or

more channels are selected, all parameter

edits will aect the selected channels, not

the Hex layer. However, Mob of Emus will

continue to apply the Hex layer osets and

modiﬁcations, allowing you to make edits

to the individual channels while hearing the

Hex Mode osets.

Channel Selectors and LEDs

The channel selector buttons are used to

select channels for editing, to manually

trigger individual channels, and to solo or

mute individual channels (see the back page

for details). The LEDs indicate the channels

selected for editing as well as displaying

triggers. When OPTION is held or latched,

the LEDs act as a graphical output level

viewer.

When editing HARM/SERIES, HARM#,

OCTAVE, QUANT, SEMI, or DC, the LEDs

(along with the Preset LEDs and the HEX

LED) will display the current pot value as a

temporary LED meter. Check the manual

for details.

Outputs

Six individual channel outputs and a

summed Mix output.

Preset/CV Mode Selectors

Load or save one of 12 presets. Double-click

and hold OPTION and click to select the CV

Input Mode.

H.GAIN/MIX Sets channel level in dB, from

-inﬁnity to 0.

Option 1: Mix output control. Turn clockwise

from noon to sum a channel into the MIX

output. Turn counterclockwise from noon to

remove a channel from the MIX output.

VARIATION/WARP Sets the probability

that a channel will ratchet or drop a

step. Turn clockwise from noon to

increase the probability of a ratchet. Turn

counterclockwise from noon to increase the

probability of a dropped step.

QUANT/RND/DC Selects the scale that a

channel’s output will be quantized to.

Option 1: Add random frequency variation to

a channel’s output.

Option 2: Add a DC oset (+/- 12 semitones)

to a channel’s output.

In Hex Mode:

Unless noted, Options 1 and 2 are the same

as individual mode.

FREQ/FINE/SEMI Osets all channels’

frequencies.

OCTAVE/2X Osets all channels’ octaves.

WAVE/ENV/PAT Selects all channels’

waveshapes. Set 0 to enable the individual

channels’ waveshapes.

PHASE/SYNC/1S Osets all channels’

phase settings.

Option 1: Enables hard sync for channels

2–6, with channel 1 as master.

Option 2: Sets all channels to 1-shot mode.

HARM#/SERIES Sets the number of

channels playing (from 1 to 6).

Option 1: Selects a preset harmonic series,

setting the frequency multipliers of all 6

oscillators simultaneously.

H.GAIN/MIX Sets “Harmonic Gain.” Turning

counterclockwise from max progressively

attenuates the higher numbered channels

until, at full counterclockwise, only channel

1 is audible.

Option 1: Mix attenuation control.

Product specificaties

Merk:	Rossum Electro-Music
Categorie:	Niet gecategoriseerd
Model:	Mob Of Emus

Heb je hulp nodig?

Als je hulp nodig hebt met Rossum Electro-Music Mob Of Emus stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Rossum Electro-Music

Rossum Electro-Music Morpheus Handleiding

1 December 2023

Rossum Electro-Music ASSIMIL8OR Handleiding

30 Augustus 2023

Rossum Electro-Music Control Forge Handleiding

30 Augustus 2023

Rossum Electro-Music Panharmonium Handleiding

30 Augustus 2023

Rossum Electro-Music Mob Of Emus Handleiding

30 Augustus 2023

Rossum Electro-Music Evolution Handleiding

30 Augustus 2023

Rossum Electro-Music Trident Handleiding

30 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024

Philips Senseo HD7002 Handleiding

24 December 2024

D-Link DUB-C2 Handleiding

24 December 2024

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024

Nec DS1-TM01 Handleiding

24 December 2024

Profoto RFi Softbox Octa Handleiding

24 December 2024

Koenic KAP 2523 Handleiding

24 December 2024

Philips HD9921 Handleiding

24 December 2024

Philips Senseo HD7008 Handleiding

24 December 2024

Onkyo IRK1804C Handleiding

24 December 2024