Revox C100 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Revox C100 (11 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
1
C100 Multiuser Remote Control
The C100 IR remote control is a universal remote control for the Multiuser system from Revox. It
can be used to control all Multiuser devices that have a built-in or external infrared receiver. The
M300 and M500 have built-in IR receivers, but can also be supplemented with an external IR
receiver M204 or the C18 Multiuser Wall Control. Our V219 or M30 side room amplifiers, as
installation products, do not have built- IR receivers, but can also be equipped with external IR in
receivers.
The C100 can be used to cover all the everyday basic functions provided by the Multiuser system.
For example, the selection of up to 4 users and their user favourites stored in the Multiuser App.
These basic functions are already stored in the Multiuser Configurator. Through extended
programming (by specialist personnel), many other additional functions can be handled by the C100.
In doing so, the configurator determines which functions the IR command sent is to perform. Via a
proxy, even IP commands can be sent to other units in the home network.
In addition to controlling the multi-user system from Revox, the C100 has an IR database for
countless TV manufacturers. This means that a TV set can also be controlled in basic terms. An
overview of the different manufacturers can be found at the end of these operating instructions.
The selection is made by entering a 4-digit numerical code.
Battery replacement
If the batteries of the remote control become weaker over time, which is noticeable in a shortened
range, they can easily be replaced. To do this, remove the battery cover on the back of the remote
control and use the tip of a biro to prise out the batteries at the points marked in red. Insert the
new batteries, making sure that the polarity is correct. The batteries should be replaced in pairs.
Back view C remote control : 100
Replacement batteries : 2 St. CR2032 / 3V
Disposal of the batteries
Original equipment batteries do not contain any harmful substances such as cadmium, lead and mercury. According to
the Battery Ordinance, used batteries must not be disposed of with household waste. Dispose of used batteries free of
charge in the collection containers provided by retailers. You will also find a collection container for used batteries at
your specialist dealer.
2
Button
Print
Multiuser command
- d - re LED
Muliuser RC5 code
Adr./ c ommand
TV command
- gre - en LED
Revox OFF
Revox Off 1
29 / 39
Power TV
Power TV ²
Number 1
29 / 01
1
Number 2
29 / 02
2 / ABC
Number 3
29 / 03
3 / DEF
Number 4
29 / 04
4 / GHI
Number 5
29 / 05
5 / JKL
Number 6
29 / 06
6 / MNO
Number 7
29 / 07
7 / PQRS
Number 8
29 / 08
8 / TUV
Number 9
29 / 09
9 / WXYZ
Number 0
29 / 00
0
29 / 50
Back
29 / 31
Menu
29 / 40
Play
29 / 48
Pause
29 / 54
Stop
29 / 35
Up
29 / 37
Left
29 / 45
OK
29 / 38
Right
29 / 36
Down
29 / 29
Fast rewind
29 / 28
Fast forward
29 / 49
Recording
29 / 41
Red
29 / 42
Green
29 / 43
Yellow
3
Note Power button:
1 C100 in Multiuser mode: Multiuser power command is sent immediately.
C100 in TV mode: push button < 2 seconds, switch to Multiuser mode. Push button = 2 seconds pressed, switch to Revox Off >
Multiuser mode and Multiuser power command is sent. Alternatively, one of the 8 user (favourite) buttons or one of the 3
input buttons can be pressed.
² TV model not programmed, C100 remains in Multiuser mode (TV-LED illuminates 3 seconds on release -> error detection)
C100 in TV mode: command is sent immediately. Power TV
C100 in Multiuser mode: push button < 2 seconds, changeover to TV mode. Push button > = 2 seconds, Power TV
switch to TV mode and the TV Power command is sent. Alternatively, the source key can be pressed.TV
³ Delivery status for volume function :
The code can be used to switch between the Multiuser and the TV volume functions, so that in TV mode either the 0 0 0 0
original TV commands the RC5 commands for the Multiuser system are sent. or
29 / 44
Blue
Volume up
29 / 20
Volume up³
Volume down
29 / 21
Volume down³
Mute³
29 / 13
Mute³
AV
29 / 30
AV
Channel_up
29 / 18
Channel_up
Channel_down
29 / 19
Channel_down
Favourite User 1 of
29 / 56
Favourite User 2 of
29 / 57
Favourite User 3 of
29 / 58
Favourite User 4 of
29 / 59
User 1
29 / 63
User 2
29 / 55
User 3
29 / 60
User 4
29 / 61
Analogue input
29 / 51
Coaxial input
29 / 52
Optical input
29 / 53
TV
63 / 03
Exit
Function 1
29 / 10
Exit
Info
Function 2
29 / 11
Info
EPG
Function 3
29 / 46
EPG
Format
Function 4
29 / 47
Format


Product specificaties

Merk: Revox
Categorie: Afstandsbediening
Model: C100

Heb je hulp nodig?

Als je hulp nodig hebt met Revox C100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Afstandsbediening Revox

Handleiding Afstandsbediening

Nieuwste handleidingen voor Afstandsbediening