RetroSound HPA-1 Handleiding

RetroSound Tv-antenne HPA-1

Lees hieronder de 📖 handleiding in het Nederlandse voor RetroSound HPA-1 (2 pagina's) in de categorie Tv-antenne. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
Installation Guide
HPA1
Ampliîš¿ed AM/FM
Hide-away Antenna
HPA1 Antenna
Installation
The HPA1 antenna is designed to mount inside your vehicle when you are not using a
traditional fender-mounted antenna.
1. Place the main body of the HPA1 as high in the dash as possible. Avoid placing it
near any high-current wiring.
2. Ground the HPA1 to a clean metal point close to its body with the small braided
cable and eyelet.
3. Route the antenna cable with the thin black power wire to your radio location.
Connect the thin black wire to a 12-volt ignition source or the blue power antenna
output wire of your RetroSound® radio.
4. Connect the male antenna plug into the female antenna receptacle of your radio.
www.retromanufacturing.com
Warranty
Your unit comes with a manufacturer's warranty covering any defects in materials and workmanship.
Retro Manufacturing, LLC (collectively referred to as "the warranter"), at its option, will either (a)
repair your unit with new or refurbished parts or (b) replace it with a new or refurbished unit. The
warranty period starts from the original purchase date and is valid for the length of time indicated in
the chart below. The decision to repair or replace will be made by the warranter.
ITEM WARRANTY
Antennas One (1) Year
During the "Parts" warranty period, there will be no charge for parts. You must mail in your
unit during the warranty period at your expense. This warranty only applies to products
purchased directly from Retro Manufacturing or an authorized dealer. This warranty
is extended only to the original purchaser of a new product that was not sold "as is."
A purchase receipt or other proof of the original purchase date is required for warranty service.
To handle a warranty issue, contact us at or tech@retromanufacturing.com 888.325.1555 for a
Return Authorization (RA) number. A RA number must accompany all returns and warranty issues.
Any product received without a RA number will be refused.
LIMITED WARRANTY-LIMITS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials and workmanship and DOES
NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER
damages that occurred during shipment, failures which are caused by products not supplied
by the warranter, failures that result from accident, misuse, abuse, neglect, bug infestation,
mishandling, misapplication, alteration, faulty installation, set-up adjustment, maladjustment of
consumer control, improper maintenance, improper antenna, inadequate signal reception or
pickup, power line surge, improper voltage supply, lightning, modification, commercial use (such as
use in hotels, offices, restaurants, or other business uses) or rental use of the product, or service
by anyone other than Retro Manufacturing, LLC, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY.
THE WARRANTER IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS UNIT OR ARISING OUT OF ANY BREACH OF
THIS WARRANTY. (As examples, this excludes damages for lost time, the cost of having
someone remove or re-install an installed unit if applicable, travel to and from the servicer, and
loss of media, data, or other memory contents. The items listed are not exclusive but are for
illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages or
limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights which vary from state to
state. If a problem with this unit develops during or after the warranty period, you may contact your
dealer or Retro Manufacturing, LLC.
7470 Commercial Way
Henderson, NV 89011
©2021 Retro Manufacturing, LLC | Published: 07/21/21
www.retromanufacturing.com

Product specificaties

Merk: RetroSound
Categorie: Tv-antenne
Model: HPA-1

Heb je hulp nodig?

Als je hulp nodig hebt met RetroSound HPA-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Tv-antenne RetroSound

RetroSound

RetroSound MC-8207 Handleiding

11 Maart 2024
RetroSound

RetroSound RetroAntenna PA04 Handleiding

8 Juli 2023
RetroSound

RetroSound PA-01 Handleiding

2 Juli 2023
RetroSound

RetroSound WPA1 Handleiding

2 Juli 2023
RetroSound

RetroSound Retro Antenna PA04 Handleiding

27 Juni 2023
RetroSound

RetroSound PA-02 Handleiding

26 Juni 2023
RetroSound

RetroSound PA-03 Handleiding

26 Juni 2023
RetroSound

RetroSound HPA-1 Handleiding

24 Juni 2023

Handleiding Tv-antenne

Nieuwste handleidingen voor Tv-antenne

Wilson

Wilson NMO Handleiding

19 November 2024
Megasat

Megasat DVB-T 30 V2 Handleiding

6 November 2024
One For All

One For All 15584 Handleiding

2 November 2024
One For All

One For All 15520 Handleiding

2 November 2024
One For All

One For All SV 9429 Handleiding

2 November 2024
Thomson

Thomson ANT1538BK Handleiding

15 Oktober 2024
EMOS

EMOS J0704 Handleiding

16 Juli 2024
Sencor

Sencor SDA 102 Handleiding

3 Juli 2024
Sencor

Sencor SDA 512 Handleiding

3 Juli 2024
Sencor

Sencor SDA 502 Handleiding

2 Juli 2024