Renusol ConSole Handleiding

Renusol Diversen klimaatbeheersing ConSole

Lees hieronder de 📖 handleiding in het Nederlandse voor Renusol ConSole (8 pagina's) in de categorie Diversen klimaatbeheersing. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
ConSole Installation instructions
2 — Renusol ConSole · EN · 04/2011
INSERTION
Product Information
The ConSole assembly system is the ideal solution for installing PV modules
on flat roofs with pitch of up to 5° without roof penetration. Most commercially
available framed standard PV modules fit on the ConSole.
The ConSole is weighed down with ballast (gravel, paving slabs, etc.) in order to
resist the wind loads. The necessary weight of the ballast depends on the height
of the building, its location and condition of the ground and the wind and snow
loads. Reference values for the necessary ballast are contained in "Preparing the
assembly – point 2." in the table on page 5 above.
The ConSole is made from 100% recycled chlorine-free polyethylene (HDPE).
The material of the ConSole satisfies the fire prevention measures of DIN 4102
class B2. The energy amortization time of the ConSole is shorter than one year.
A ConSole weighs 5 −7.2 kg depending on the type and can be stacked with up
to 40 ConSoles per pallet. The circular assembly edge will facilitate a fast
installation. Generously sized ventilation channels ensure efficient air circulation.
The boreholes on the ground of the ConSole are conducive for drainage.
We wish to point out that work must be carried out according to current safety
regulations (e.g., VBG37) in order to prevent accidents. Please carry out the
respective safety measures.
Warranty
Our warranty only applies if an original ConSole complete system is used.
In order to adjust the system optimally for the local conditions and to fulfil all
applicable regulations, we recommend an expert report be prepared if in any
doubt. The installation should be carried out by skilled and trained personnel.
If you have questions concerning training, please contact Renusol.
Installation instruction
Please read these installation instructions carefully before starting installation.
First, familiarize yourself with the system components. The ConSole can be
stored and used at temperatures of between -30° C and +50° C. We recommend
the ConSoles be assembled at plus temperatures. The roof area must in any case
be free of snow and ice.
During the installation and, in particular, while working on the roof, be sure to
observe the relevant health and safety provisions and please follow the current
rules and regulations.
Please also check the current version of our installation instructions on our
website at www.renusol.com. Here, you can also find instructions in other
languages, if required. The figures and texts in the installation instructions
correspond to current technology at the time of printing. We reserve the right
to make changes.
The installation instructions merely contain recommendations in accordance
with current technology and are based on the experience of how systems made
by Renusol can be installed. If any roof or object-specific characteristics are to be
considered, please, if necessary, involve specialists such as roofers or structural
engineers for the purposes of explanation.
The Renusol team wishes you a successful installation.
Renusol ConSole · EN · 04/2011 — 3
A ConSole
B U profiles of aluminium
C PV module
D Generously sized
Ventilation channels
E Boreholes for draining
the ConSole
F Circular assembly edge
B
B
C
D
D
D
D
E
E
F
F
A
SYSTEM OVERVIEW
SYSTEM OVERVIEW OF COMPONENTS
TOOLS REQUIRED (not included in delivery)
8 hexagonal
screws
M6 x 20 mm,
stainless steel
OPTIONAL EXTENSION RAILS
ConSole set of extension rails
consisting of:
– 2 ConSole extension rails, aluminium
– 4 hexagonal screws M6 x 20 mm, stainless steel
– 4 washers, stainless steel
– 4 self-locking hexagon nuts M6,
stainless steel
8 Self-locking
hexagon nuts M6,
stainless steel
8 washers,
stainless steel
– Cordless screwdriver with hexagonal insert
for 10-mm screw
– 7-mm drill
– 10-mm open end or ring spanner
55
150
A ConSole B 2 U profiles,
aluminium

Product specificaties

Merk: Renusol
Categorie: Diversen klimaatbeheersing
Model: ConSole

Heb je hulp nodig?

Als je hulp nodig hebt met Renusol ConSole stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Diversen klimaatbeheersing Renusol

Renusol

Renusol ConSole Handleiding

5 Juni 2023

Handleiding Diversen klimaatbeheersing

Nieuwste handleidingen voor Diversen klimaatbeheersing

Oregon Scientific

Oregon Scientific BA169 weer hub Handleiding

16 Oktober 2023
Riello

Riello BGK0.1 Handleiding

14 Oktober 2023
Premix

Premix XR-Serie Handleiding

27 September 2023
Elektrobock

Elektrobock RJ 402 Handleiding

11 September 2023
Elektrobock

Elektrobock RJ 401 Handleiding

11 September 2023
Elektrobock

Elektrobock RJ 403 Handleiding

11 September 2023
DGFlow

DGFlow Presflo Handleiding

6 September 2023
Sonnenkonig

Sonnenkonig FRIGORA 500-24F Handleiding

3 September 2023
Kaysun

Kaysun KC-FCD2 Handleiding

17 Augustus 2023
Plugwise

Plugwise Switch Handleiding

24 Juli 2023