RCA RTD317W Handleiding

RCA Home cinema set RTD317W

Lees hieronder de 📖 handleiding in het Nederlandse voor RCA RTD317W (2 pagina's) in de categorie Home cinema set. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

USER MANUAL

RTD317W

It's important to read this instruction prior to using your new product for the rst time.

This device complie s with part 15 of the FCC

Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation.

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmf ul inte rference in a residential

installation. This equipment ge nerate s, uses

and can radiate radio frequency energy and, if

not installed and used in accordance with the

instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful inter ference

to radio or television reception, which can be

determined by turning the equipment off and

on, the user is encouraged to try to correct the

interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

•

I nc re a s e th e se pa r at i on be t we e n t he

•

equipment and receiver.

Connect the equipment into an outlet on a

•

circuit dierent from that to which the receiver

is connected.

Consult the dealer or an experienced radio /

•

TV technician for help.

WARNING: Changes or modications to this unit

not expressly approved by the party responsible

for compliance could void the user's authority to

operate the equipment.

FCC Information

Connections and Setup

Overview of Controls - Front Panel Controls

Overview of Controls Overview of Controls Playing Discs - Basic Functions Basic Playback Operations

Connections and Setup Connections and Setup

FCC Information Important Information

Important Safety Instructions

This Home Theater has earned

the ENERGY STAR.

This product complies with DHHS Rules 21

CFR Subchapter J. Applicable at the date of

manufacture.

Ventilation

You must adequately ventilate the product. Make

sure there is adequate space around the unit

to provide proper air ow for ventilation. See

diagram.

For your safety

The AC power plug is polarized

(one blade is wider than the

other) and only ts into AC

power outlets one way. If the

plug won’t go into the outlet

completely, turn the plug over

and try to insert it the other way.

If it still won’t t, contact a qualied electrician to

change the outlet, or use a dierent one. Do not

attempt to bypass this safety feature.

Removing the power plug is the only way to

completely remove power from your product. Make

sure the power plug remains easily accessible.

Note

This DVD player is designed and manufactured to

respond to the Region Management Information.

If the Region number of a DVD disc does not

correspond to the Region number of this DVD

player, this player cannot play the disc. The Region

number for this DVD player is Region 1.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSER-

VICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE

SAME OR EQUIVALENT TYPE.

WARNING: MAINS PLUG IS USED AS DISCONNECT DEVICE AND IT SHOULD REMAIN READILY OPERABLE

DURING INTENDED USE. IN ORDER TO DISCONNECT THE APPARATUS FROM MAINS COMPLETELY, THE

MAINS PLUG SHOULD BE DISCONNECTED FROM THE MAINS SOCKET OUTLET COMPLETELY.

Caution

This product utilizes a laser. Use of controls or

adjustments or performance of procedures other

than those specified may result in hazardous

radiation exposure. Do not open covers and do

not repair yourself. Refer servicing to qualified

persionnel.

Visible and invisible laser radiation when open

and interlocks defeated.

DO NOT STARE INTO BEAM.

Class 1 laser product

DVD copy protection

In accordance with the DVD standard, your DVD

player is equipped with a Copy Protection system,

which can be switched on and o by the DVD

disc itself, in order to make any recording of the

relevant DVD disc onto a videotape of very poor

picture quality, or even impossible. This product

incorporates copyright protection technology

that is protected by method claims of certain U.S.

patents and other intellectual property rights

owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home use only

unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly

is prohibited.

Important battery information

• Do not mix dierent types of batteries or new

and old batteries. Do not use rechargeable

batteries.

• In order to avoid any risk of explosion, observe

the polarities indicated inside the battery

compartment. Replace only with the type of

batteries specied. Do not dispose of them in

a re or recharge them.

• If you are not using the remote control for a

long period of time, remove the batteries.

Illustrations contained in this document are for

representation only.

Please respect the environment and

prevailing regulations. Before you

dispose of batteries or accumulators,

ask your dealer whether they are

subject to special recycling and if

they will accept them for disposal.

T chis lass B digital apparatus ompliesc

with CES-003.Canadian I

Cet appareil num rique de la lassc B

est onforme lac norme du NMB-003

du Canada.

Please read and save for future reference.

Some of the following information may not apply

to your particular product; however, as with any

electronic product, precautions should be observed

during handling and use.

Read these instructions.

•

Keep these instructions.

•

Heed all warnings.

•

Follow all instructions.

•

Do not use this apparatus near water.

•

Clean only with a dry cloth.

•

Do not block any ventilation openings. Install in

•

accordance with the manufacturer’s instructions.

Do not install near any heat sources such

•

as radiators, heat registers, stoves, or other

apparatus (Including amplifiers) that produce

heat.

Do not defeat the safety purpose of the polarized

•

or grounding-type plug. A polarized plug has

two blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong. The wide blade or the third

prong is provided for your safety. If the provided

plug does not fit into your wall outlet, consult

an electrician for replacement of the obsolete

outlet.

Protect the power cord from being walked on

•

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

Only use attachments / accessories specied by

•

the manufacturer.

Use only with a cart, stand, tripod,

•

bracket, or table specied by the

manufacturer, or sold with the

apparatus. When a cart is used,

use caution when moving the

cart / apparatus combination to

avoid injury from tip-over.

Unplug this apparatus during lightning storms

•

or when unused for long periods of time.

Ref e r all se rv ic i ng to q u ali f i ed ser vi c e

•

personnel. Servicing is required when the

apparatus has been damaged in any way, such

as the power cord or plug is damaged, liquid

has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

]

Portable Cart

Warning

Important Safety Instructions

Additional safety information

• Apparatus shall not be exposed to dripping or

splashing and no objects lled with liquids, such as

vases, shall be placed on the apparatus.

• Always leave sucient space around the product for

ventilation. Do not place product in or on a bed, rug,

in a bookcase or cabinet that may prevent air ow

through vent openings.

• Do not place lighted candles, cigarettes, cigars, etc.

on the product.

• Connect power cord only to AC power source as

marked on the product.

• Care should be taken so that objects do not fall into

the product.

• Do not attempt to disassemble the cabinet. This

product does not contain customer serviceable

components.

If your product operates on batteries, adhere to the

following precautions:

A. Any battery may leak electrolyte if mixed with a

dierent battery type, if inserted incorrectly, or if all

batteries are not replaced at the same time.

B. Any battery may leak electrolyte or explode if disposed

of in re or an attempt is made to charge a battery

not intended to be recharged.

C. Discard leaky batteries immediately. Leaking batteries

can cause skin burns or other personal injury. When

discarding batteries, be sure to dispose of them in the

proper manner, according to your state/provincial and

local regulations.

D. Battery shall not be exposed to excessive heat such

as sunshine, re or the like.

Connecting the antennas

The AM and FM antennas connect to the AM and

FM terminals on the system’s back panel. They must

be hooked up in order to receive clear reception.

    

       



 



AM Loop Antenna

1. Uncoil the AM Antenna wire.

2. Press down on the Antennas tab to open the

terminal.

3. Make sure the white wire on the AM loop antenna

is inserted into the AM loop terminal and the other

wire is inserted into the ground loop terminal.

FM75

White

Antenna

GND

Connecting to your TV (VIDEO)

Method 2

Component video jacks (Pr, Pb, Y)

• The component video jacks are color-coded

green, blue and red.

• Additional component video cables (not

supplied) are required to provide best picture

quality. They are usually color-coded green, blue

and red.

• Connect the component video OUT jacks on the

receiver to the component video IN jacks on your

TV so the video content goes from the receiver

to the screen.

Method 1

Composite video jack (yellow)

• The basic video jack is color-coded yellow.

• Video cable (yellow) is supplied for the connection

for good picture quality.

• Connect the video OUT jack on the receiver to

the Video IN jack on your TV so the video content

goes from the receiver to the screen.

• If your television is a high denition

television, use the unit’s progressive

scan output to get the highest possible video

resolution. Set the Progressive Scan option

in the Video menu to On.

• If one of the devices is not working, check that

all the cables have been inserted properly

into the jacks.

• Connecting mono components to your

receiver: If your component has only one

output for audio (mono), connect it to the

white audio jack on the receiver and don’t

use the cable’s red plugs.

Connecting to your TV (via HDMI input)

HDMI stands for High Denition Multimedia

Interface. HDMI transfers digital audio and

uncompressed digital video on a single cable.

Press the HDMI button on the remote control to

change output signals as follows: 480p, 720p,1080i

and 1080p.

Note: Refer to the owner’s manual of the connected

TV as well.

Getting sound from external sources

such as TV

Using AUDIO IN jack

Connect the Ø3.5mm AUDIO IN jack on the front

panel of the unit to the headphone output on mp3

players.

Using AUX IN jacks

1. Connect the AUX IN jacks from the unit to the

AUDIO OUT jacks on VCR, TV, Set Top Box or

other component.

2. Push the AUDIO/AUX button on the remote

control to activate the sound from the external

source.

3. Push the SURROUND button on the remote

control to select the sound mode.

Digital optical input

1. Connect components capable of outputting

Dolby Digital (e.g. TV or Set Top Box) or standard

PCM (CD) format digital signals.

2. Push the OPTICAL button on the remote control

to activate the sound from the external source.

3. Push the SURROUND button on the remote

control to select the sound mode.

Notes

• Ø3.5mm to Ø3.5mm audio cable s (not

included).

• Press either SOURCE on the main unit or AUDIO

/AUX on the remote control to select AUDIO IN

mode.

• Press the SURROUND button on the remote

control to select the sound mode.

• Suggest using Ø3.5mm AUDIO

IN jack for MP3 player and AUX

IN jacks for auxiliary equipment

such as DVD, VCR or PC.

• If the AUX IN (or AUDIO IN) audio signal

is mono, you may not receive audio on

all speakers.

Connecting the speakers

Speaker wires are color-coded to match the terminals. Connect the speaker wire from the back of each speaker to

the corresponding color terminal at the back of the unit. Press down the tab to open the terminal and insert the

wire. Release the tab to lock wire in the terminal.

• When connecting the speakers, make sure the polarities (“+” speaker wire to “+” on the receiver. For example, red

wire to red terminal on the receiver) of speaker wires and terminals match. If the cords are reversed, the sound

will be distorted. Do not let the speaker wires touch each other, it will damage the Home Theater’s amplier.

• Center speaker provided with this unit are magnetically shielded to protect your TV set. It is not recommended

to place the front speakers, surround speakers and subwoofer near the TV set.

To adjust each speaker volume level for optimum listening experience.

(1) Press the LEVEL button on the remote control to select FL (front Left speaker).

(2) Press the VOL+/VOL- buttons to adjust the value up or down (between -10dB and +10dB).

(3) Repeat step (1) and (2) for the other speakers FR, SL, SR, CT, SW.

Speaker gains may be set to levels of up to +10dB, actual max levels may also depend on your Volume Setting.

Note:

Insert 2 “AAA”(“UM-4”/”R03”) batteries

to the remote control prior to use.

1. Left, Right (Front Speakers)

Front speakers carry primarily music and sound

eects.

2. Center

In surround mode, the center speaker carries most

of the dialog as well as music and eects.

It should be set between the left and right peakers.

3. Surround (Rear Speakers)

The surround speakers’ overall sound balance

should be as close as possible to the front peakers.

Proper placement is vital to establish an evenly

distributed sound eld.

4. Subwoofer

A subwoofer is designed to reproduce powerful low

bass eects (explosions, the rumble of spaceships,

etc.).



Front speaker placement

For best results, follow the speaker placement

below.

Alignment

Align the center speaker evenly with (A) or slightly

behind (B) (the left and right speakers), but not

ahead of them.

Angle

Place the left and right speakers to form a 45-

degree angle with your favorite viewing position

to duplicate the soundtrack mixer’s perspective.

Height

The three front speakers should be as close as

possible to the same height. This often requires

placing the center speaker directly on top (A) or

beneath (B) the TV set.

Positioning speakers

Accessories provided

















 





Things to consider before you connect

• Ensure that the mains supply in your house

complies with that indicated on the identication

sticker located on the back of your unit.

• Install your unit horizontally, away from

any source of heat (replace) or appliances

creating strong magnetic or electric elds. The

components of this unit are sensitive to heat.

The maximum ambient temperature should not

exceed 35°C / 95°F.

• Leave enough space around the unit to allow

adequate ventilation: 10 cm/4 inches on either

side and above the top, and 5 cm/2 inches at the

rear.

• The humidity of the room should not exceed 75%.

If you have to use the unit outdoors, do not expose

it to rain or splashing water. The apparatus should

not be exposed to dripping or splashing and no

objects lled with liquids, such as vases, should

be placed on the apparatus.

• Moving the unit from a cold place to a warm one

can cause condensation on some components

inside the unit. Let the condensation disappear

on its own before turning the unit on again.

• Before moving the unit, make sure the disc tray

is empty.

Better surround placement

Location

If possible, place surround speakers to either side

of the listening area, not behind it.

Height

If space permits, install surround speakers 2-3 feet

above viewers. This helps to minimize localization

eects.

Alternative Surround Placement

Rear wall

If rear wall mounting is the only choice, aim the

speakers at each other (A), towards the front (B) or

towards the sidewalls (C, D).

Experiment with placement until sounds seem to

surround you, rather than come from behind you.

No adjacent walls

Surround speakers can go on stands facing each

other to approximate sidewall mounting (A), or to

the sides or rear of the viewing area, aimed upwards;

they can go right on the oor, or preferably, a few

feet o the oor such as on end tables (B).

Test tone/Channel balance

Channel balance

Your receiver is equipped with a test signal

generator for balancing the channels. As the signal

“travels” from channel to channel, adjust the level

controls until each channel plays at the same

loudness level.

Level adjustment and surround channel level

expectation

Even though you adjust the surround channel

to be as loud as the others on the test signal, on

actual program material the surround channel is

adjust the surround level; program producers use

surround for subtle atmospherics and ambience,

and only rarely for special eects.

ON•OFF: Turns on/o the unit.

DVD: Selects the DVD mode.

TUNER: Selects the TUNER and selects between FM/

AM.

AUDIO/AUX: Selects and toggles between the front

AUDIO IN AUX IN mode and rear mode. (for

listening to audio input from connected TV,

VCR or SetTop BOX).

OPTICAL: Selects OPTICAL IN at rear for digital audio

connection.

0-9 : Number entry.

CLEAR: Quits the current setting manually from the

TV screen without saving change.

INFO: Accesses the Info menu.

TITLE: Accesses the title menu of DVD discs.

DISC MENU: Accesses the disc menu during playback.

OK : Conrms your selection.

/ / / : To navigate through the menus. The left and

right arrows also tune the radio frequency in

the tuner mode.

MUTE: Mutes and restores the sound.

SETUP: Enters Setup menu.

RETURN: In DVD mode, returns to the previous menu.

VOL +/- : Adjusts the sound volume.

CH+/ , CH–/ : Directly accesses the next or previous

chapter (DVD) or track (CD). Selects

programmed stations in TUNER mode.

REV: Starts reverse accelerated play.

PLAY: Starts playing a disc.

FWD: Starts forward accelerated play.

SLOW: Selects SLOW motion function.

STOP : Stops playback.

PAUSE: Freezes frame, accesses frame advance.

AUDIO: Accesses the audio function.

ANGLE: Accesses the camera angle function for DVD

disc.

ZOOM: Accesses the Zoom function.

SUBTITLE: Selects the subtitle languages or turns

subtitle o ( if available).

HDMI: Changes video output signals (480p, 720p,

1080i or1080p).

SUBWOOFER : Selects among subwoofer output levels

(soft/balance/strong/powerful).

RANDOM:

Turns on/o random playback on CDDA disc.

REPEAT: Accesses the repeat function.

LEVEL: Toggles channels for dierent level settings.

Adjusts the value using VOL +/-.

SURROUND: Changes the Surround sound

setting.

Press the button to select between

5.1 Channel and Stereo modes.

Remote control functions in tuner mode

TUNER: Selects the TUNER and switch between

FM/AM.

VOL+/–: Adjusts the sound volume.

MUTE: Mutes and restores the sound.

TUNER +/–: Tunes down and up the radio

frequencies.

MEMORY: Stores a station.

CH+/–: Selects programmed stations.

AUDIO: Selects between Stereo and Mono

mode for Tuner (FM).

Compatible discs

•DVD,DVD-R,DVD-RW,DVD+R,DVD+RW

•CD,CD-R,CD-RW

Compatible formats

•DVD,JPEG

•CD,VCD

Regional coding

Your unit has been designed to process regional

management information stored on DVD discs. The

regional code for your unit is 1. Discs that have a

dierent regional code will not play.

Operating the DVD receiver

1. Turn on your television set.

2. Press ON OFF on the remote or ON/STANDBY 

located on the unit’s front panel. Press DVD on

the remote control.

Loading disc

1. Press on the front panel to open the disc tray.

2. Place a disc onto the disc tray with the label side

up.

3. Press again to close the disc tray.

Playback

Switch the unit and the TV set on.

1. After loading a disc, playback starts

automatically, or the disc menu appears. If the

disc menu appears, select the Play option to

begin playback.

2. Press STOP to stop playback.

Accelerated play

While the disc is playing, press REV or FWD one

or more times to vary the speed and direction of

the accelerated play. Press PLAY to resume normal

playback.

Pause

While the disc is playing, press PAUSE once for freeze

frame. Press PLAY to resume normal playback.

Frame advance

1. Press PAUSE twice. “Step” is displayed.

2. Each time you press PAUSE button, the picture

advances one frame.

3. Press PLAY to resume normal playback.

Variable slow motion

1. Press SLOW button on the remote in play

mode.

2. Each time the SLOW button is pressed the

speed of slow-motion playback changes in the

following sequence:

3. Press PLAY to resume normal playback.

Changing chapter/track

While the disc is playing, press the CH+/- button

to go immediately to the next or previous chapter,

or to the next or previous track.

Zoom

1. While a disc is playing, press ZOOM until you

reach the zoom size you want. The ZOOM

button toggles through 2x, 3x, 4x and then

zooms out to 1/2x, 1/3x and 1/4x, then returns

to normal playback.

2. Move from one area to another (pan) using the

arrow buttons.

3. To turn ZOOM o, press ZOOM until you get to

the ZOOM OFF option.

Types of menus

• Discmenu—Theappearanceandcontentsof

this menu varies according to the type of disc

you have inserted. It is separate from the Setup

menu.

• Infomenu—Theunit’sInfomenu appearsat

the top of the screen while the disc is playing.

Press INFO on the remote to switch the Info

menu on or o.

• Setup menu — Press SETUP to access  this

menu.

SF 1/ 2 SF 1/ 3 SF 1/ 4 SF 1/ 5

PLAY SF 1/ 7 SF 1/ 6

T T

7 cm

10 cm10 cm

10 cm

Selects the input sources. Press

repeatedly to select:

•DVD–towatchDVDvideos.

•TUNER–tolistentotheradio.

•AUXIN(rear)/AUDIOIN(front)

- to listen to the audio input

from the connected TV, VCR or

Set Top Box.

•OPTICAL(rear)-toconnect

digital audio components.

Toggles between dierent

subwoofer output levels (among

soft/balance/strong/powerful).

Starts/pauses

playing a disc. Adjusts the

volume.

Switches the

unit on and

o.

AUDIO IN jack -

connects audio

devices.

Opens and closes

the disc tray.

Stops disc

playback.





 







S



   Ω Ω Ω Ω









Insert

Press

Release









Service information

This product should be serviced only by those

specially trained in appropriate servicing

techniques.

THE LIGHTNING FLASH AND ARROWHEAD WITHIN

THE TRIANGLE IS A WARNING SIGN ALERTING YOU

OF “DANGEROUS VOLTAGE” INSIDE THE PRODUCT.

THE EXCLAMATION POINT WITHIN THE TRIANGLE

IS A WARNING SIGN ALERTING YOU OF IMPORTANT

INSTRUCTIONS ACCOMPANYING THE PRODUCT.

WARNING

To reduce the risk of re or electric shock

hazard, do not expose this product to rain or

moisture. The apparatus shall not be exposed

to dripping or splashing and that no objects

lled with liquids, such as vases, should be

placed on the apparatus.

- 1 -

- 4 -

- 8 - - 9 - - 10 - - 11 -

- 5 - - 6 - - 7 -

- 2 - - 3 -

Using remote control to navigate through

the on-screen menus

Use and OK on the remote control to , , ,

navigate through the on-screen displays (the

DVD player’s menu, the Info Display that appears

during playback, or a disc’s menu).

Use on the remote to move through on-, , ,

screen menus in the direction of the arrow button

(e.g., to move right, press ). The arrow buttons are

used to highlight an option. Once highlighted,

press OK to select the option that is highlighted.

Aiming

Aim surround speakers straight across the room,

not down at viewers, to help create a more open,

spacious surround sound eld.

Rear of the unit

Rear of the unit Rear of the unit

Green

Blue

Red

To HDMI

input

HD MI c able

( snot upplied)

The Info Menu The Info Menu

Additional Information

Print in China

811-317W91W010

Additional Information Additional Information Limited Warranty Limited Warranty

The Setup MenuThe Setup Menu

Jpeg Files

The Info Menu Radio

AUDIO IN/AUX IN/OPTICAL IN

Note: Many discs only have one title.

Note: Time display function may not

be available on all discs.

Notes:

• The time taken for the contents of the

disc to be displayed varies according to

the size and number of jpeg les on the

disc. If nothing is displayed after a few

minutes, the le sizes may be too large.

Reduce the les’ resolution and write

another disc.

• Before inserting a disc, make sure it is

compatible with the unit.

Title/chapter (DVD)/track (audio CD)

To directly access a title, chapter (DVD) or a track

(audio CD), press INFO, press OK.

Select the Title(TT), Track(TRK) or Chapter(CH)

icon and enter a number directly with the numeric

buttons. Press OK again to conrm.

Subtitles (DVD)

Subtitles are turned o by default. Turn on subtitles

as follows:

1. While the disc is playing, press INFO twice, then

select the Subtitles icon using the left/right

arrow buttons.

2. Select a language using the up/down arrow

buttons.

3. To turn subtitles o, select the o option or

press SUBTITLE on the remote.

When you change the language of the subtitles

using the Info menu, it only applies to the disc

currently being played. When you eject the disc

and switch o the unit, the subtitles will default

to the subtitle language you selected in the

Languages menu.

This function may not be available on all discs.

Time display

To access the Time Display, press INFO on the

remote. Press the up/down buttons repeatedly to

display:

DVD: Chapter elapsed time, Chapter remaining

time, Title elapsed time and Title remaining time.

Audio CD: Track elapsed time, track remaining time,

disc elapsed time, disc remaining time.

To directly access a location on the disc which does

not correspond to the start of a title or chapter,

press INFO once and press OK, highlight the Time

Display icon using the arrow buttons, then enter

a time with the number buttons (hh:mm:ss) and

press OK.

Audio (DVD)

Some discs have several audio tracks used for

dierent languages or dierent audio formats.

To change the language or audio format during

playback:

1. Press the INFO button twice.

2. Use the left/right arrow buttons to select the

Audio icon, or press the AUDIO button on the

remote control.

3. Choose a language or an audio format with the

up/down arrow buttons.

This option is only available if the disc oers dialog

languages or audio formats. When you change

the dialog language using the Info menu, it only

changes the dialog language of the disc being

played. When you eject the disc or switch o

the unit, the language will revert to the one you

selected in the language Setup menu.

Camera angle (DVD)

Some discs oer dierent camera angles for

specic scenes.

1. To change the camera angle, press the ANGLE

button on the remote or press the INFO button

twice and select the Camera angle icon with the

left/right buttons.

2. Choose the angle with the up/down arrow

buttons.

If the disc was recorded using a single camera

angle, this function is not available.

Play mode (all discs except jpeg)

1. While the disc is playing, press the INFO button

twice for CD and three times for DVD.

2. Select the Play Mode icon using the left/ right

arrow buttons.

3. Use the up/down arrow buttons to select an

option.

• DVD play modes: standard, program, A-B

repeat, title repeat, chapter repeat. Program

play mode is only available if a program list

has been created (see below). Repeat mode is

only available with discs that display elapsed

time and remaining time. To repeat a sequence

between points A and B, choose the A-B repeat

option, and then follow the instructions for

entering the two points.

• Audio CD play modes: standard, introscan,

random, program, repeat A-B, repeat disc,

repeat track.

4. To stop repeat playback, select the Play Mode

icon and use the up/down arrow buttons to

choose the Standard option.

Creating a Program List for Program

Play Mode (Audio CDs and DVD discs)

To use program play mode, you must rst create

a program list.

1. To create a program list, press the INFO button

twice for CD and three times for DVD. Highlight

the Play Mode option and press the up arrow to

select the Program option.

2. Press OK. The Program screen is displayed.

3. The rst spot in the list is highlighted. Use the

number buttons on the remote to enter a track

number. As for DVD discs: T stands for Title while

C stands for Chapter. As for Audio CDs: T stands

for Track.

4. Use the arrow buttons to move to the next spot

in the list. Enter the next track number.

5. Continue entering tracks until you have

completed your list.

6. Highlight the Play option at the bottom of

the screen and press OK or press PLAY to start

playback. The program list will play in the order

you programmed it.

Introscan (CD)

This option plays the rst ten seconds of each track

on a CD.

1. Press the INFO button twice, then select the Play

mode icon with the left/right arrow buttons.

2. Press the up/down arrow buttons to select the

INTRO option and press OK to start IntroScan.

3. Press STOP to stop Introscan, and press PLAY to

resume normal playback.

Bookmark (DVD and audio CD)

1. Press INFO twice for CD and three times for DVD.

Select the Bookmark icon with the left/right

buttons, and press OK. A menu is displayed with

ve bookmarks.

2. The rst bookmark space is highlighted. Press

OK to set the bookmark. The bookmark is saved

and is indicated by the number 1. You can set up

to ve bookmarks on a disc.

3. To start playback from a bookmark, press the

PLAY button on the remote.

4. To delete a bookmark, highlight it and press

CLEAR.

To stop program play, press STOP or select Standard

from the Play Mode option in the INFO display.

If you want to cancel the list, repeat Steps 1 and 2

to select CLEAR and press OK.

Sleep

        



       







The unit has a built-in tuner that allows for FM

radio function. The AM loop antenna allows for AM

radio function.

Manual tuning

1. Connect the FM antenna and the AM loop

antenna at the back of the unit.

2. Press TUNER.

3. Tune a station by pressing TUNER+/-repeatedly

until the desired station is found. Alternatively,

you can press and hold the same buttons down

for about one second to activate the automatic

search function. In this mode the unit will

automatically tune frequencies until it nds a

station.

4. Repeat step 3 to tune to another radio station.

5. Press TUNER to toggle between FM and AM.

Storing radio stations

The unit can store up to 30 radio stations in its

memory. You can enter every single radio station

yourself or the unit can store all available radio

stations automatically in ascending order.

Automatic preset programming

1. Press TUNER to enter the Tuner mode.

2. Press and hold TUNER for two seconds to start

automatic preset programming.

3. Radio frequencies will be browsed and radio

stations stored automatically. When all the

available radio stations are stored or all 30

memory locations are full, the auto preset

programming function will stop.

Manual preset

1. Tune to a radio station (see “Manual tuning” for

details).

2. Press MEMORY. While the Program Preset

number is still ashing, input your desired

preset number using the numeric buttons, then

press MEMORY to store it.

Retrieving preset stations

1. Press TUNER to enter the Tuner mode.

2. Press CH +/- to search up or down for the preset

stations or directly press the numeric buttons.

TV, VCR or Set Top Box can be connected to AUX

IN / OPTICAL IN input jacks at the back of the unit

or AUDIO IN at the front panel so that sound from

the auxiliary component comes into the unit and

out through the speakers.

Connecting auxiliary components

Refer to “Getting sound from external sources

such as TV” for details on connecting the auxiliary

components to the unit.

Selecting AUDIO IN/AUX IN/OPTICAL IN

mode

Press either SOURCE on the main unit or AUDIO/

AUX/OPTICAL on the remote control to select

AUDIO IN, AUX IN or OPTICAL IN mode.

Sound output in AUX IN mode (or AUDIO

IN/OPTICAL IN mode)

• You may change the surround setting by

pressing SURROUND to select between 5.1

CHANNEL and Stereo modes.

• IftheAUXIN(orAUDIOIN/OPTICALIN)audio

signal is mono, you may not receive audio on

all speakers.

6. During the slide show you can use the left/right

button to rotate the picture, the up arrow but-

ton to rotate the image vertically, the down

arrow button to rotate the image horizontally.

Use the ZOOM button to magnify the picture.

Use the CH- button to go back to the previous

picture or the CH+ button to go to the next one,

and the STOP button to interrupt the slide show

and display the disc’s contents.

7. When the unit has played all the les, the music

or slide show stops and the disc’s contents are

displayed again.

8. Press STOP to end playback.

        

  



        



      

        



        



GENERAL SETUP

Video

Progressive Function provides high quality

pictures with less ickering. Turn on Progressive

Scan if you used the Component Video jacks of the

unit to connect a TV or monitor compatible with a

progressive scan signal.

Select P-Scan YPbPr and press OK to activate

Progressive Scan.

HDMI Setup

This lets you select the resolution of the player’s

output according to the connected TV.

• Supported HD JPEG mode: 480p, 720p, 1080i

and 1080p.

TV Type

Depending on the format of the DVD disc, you can

choose the picture format (aspect ratio) best suited

to the format of your TV screen:

• 4:3 PS: reproduces a 4:3 picture without

distortion.

•

4:3 LB: gives best reproduction of pictures recorded

in this format (i.e. with horizontal bands at the top

and bottom of the screen) or in 16:9.

• 16:9(widescreen):reproduces16:9formatlms

in full on a 16x9 screen.

Default

This option allows you to return the unit’s settings

to the original factory settings. Any changes you

have made to the unit’s settings will be reverted

back to the original settings.

Subtitles

Select the subtitle language using up/down arrow

buttons and press OK.

To change the language of the subtitles during

playback, press INFO twice for DVD and use the

left/right arrow buttons to highlight the Subtitle

icon. Press the up/down arrow buttons or the

SUBTITLE button on the remote to select a subtitle

language.

Disc Menu

To change the language of the disc menus, select

the language using the up/down arrow buttons

and press OK.

The language you select will only be displayed if

the disc is programmed with that language.

AUDIO SETUP

You can adapt your unit to other equipment and

access specic functions with the Audio Setup

menu.

1. Select the Audio Setup icon in the main menu

using the left/right arrow buttons.

2. Select an option using the up/down arrow but-

tons. Press the right arrow to move to the op-

tion’s choices.

Night Mode

You can use this function to control the dierent

sound levels via dynamic compression. It improves the

quality of the sound track at a low volume, and quiets

the loudest sounds. You can choose between Quiet,

Moderate or O.

Center Delay / Rear Delay

Basic settings have been preset for the speakers included

with your unit. However, to suit the acoustic conditions

in your listening room and to make the sound more

eective, you may need to delay the signal coming from

some of the speakers. Channel delay compensates for

centre or surround speakers that are closer to the listening

position than the front speakers.

1. Highlight the Center Delay/Rear Delay option using

the up/down arrow buttons.

2. Press the right button to move to the default

distance.

3. Press the up/down buttons to adjust the distance.

Test Tone

This function is used to test and adjust the volume level

(gain) for each individual speaker channel.

Use / to select the speaker channel you wish to

test and adjust. You’ll hear a test tone come from the

speaker you select. Use the VOL button to adjust the

level to your desired setting.

Press OK button to exit this function.

VIDEO SETUP

1. Select the Video icon in the main menu using the

left/right arrow buttons.

2. Select a menu option using the up/down arrow

buttons and press OK.

Slide Time

The Slide Time option lets you select the amount

of time a picture is displayed in a slide show. The

choices are 5 seconds, 10 seconds, or 15 seconds.

Troubleshooting

The unit does not switch on.

• Makesureitispluggedin.

• PresstheON•OFFbuttonontheremotecontrol

or the ON/STANDBY button on the front of the

unit.

The device switches o spontaneously.

• Thedeviceswitchesoautomaticallywhenitis

in STOP mode for more than 30 minutes without

any user intervention. Switch it on again.

• Itmightbeimpossibletoreadthedisc.

• Insertthediscwiththeprintedsidefacingup.

• Check that the disc can actually be played by

this device.

• Checkthatthedisc’sregionalcodematchesthe

unit’s regional code. This unit’s regional code is

• Cleanthedisc.

There is no picture.

• CheckyouhaveswitchedontheTVset.

• Checktheconnections.

• SelecttheAVinputassignedtotheunitonthe

TV.

• ReplacetheHDMIcablewith abetterone.Bad

HDMI cable can cause data lost.

• PressHDMIkeyonremotehandsetseveraltimes

to toggle among dierent HD OUTPUT.

The picture is of poor quality (with snow or

lines).

• Checktheconnections.

There is no sound or the sound is of poor

quality.

• Checktheconnections.

• Makesurethespeakersareconnected.

• MakesuretheMUTEfunctionisnoton.

No surround sound.

• Check the speaker conguration in the Setup

menu (See Positioning speaker or Audio Setup).

I can’t nd my le in the jpeg listing.

• Makesurethelenameisvalid.

The remote control does not work or works

only intermittently.

• Check that batteries are inserted or change

them.

• Aimtheremotecontrolattheunit.Theinfrared

beam must not be blocked or interrupted.

• Check that the remote control is congured

to control the device you are trying to operate

with it.

The subtitles do not appear.

• CheckthattheDVDdiscprovidessubtitles.

• Refertothesectiononhowtodisplaysub-

titles.

The disc menu language is not the correct one.

• Thediscmenulanguagehasnotbeensetup.

• Thelanguageofyourchoiceisnotavailable

on the disc .

Precautions

Use

• Ifyourunithasbeenstoredinacoolplaceforany

length of time, during a journey for example, wait

for about 2 hours before using it.

• The openings located on the top and

bottom are for ventilation and must not be

obstructed.

• During thunderstorms, we recommend that

you isolate the unit from the electrical supply

so that it is not damaged by electrical or

electromagnetic surges.

• Thisunitisdesignedforcontinuoususe.

Switching o the unit to standby mode does

not disconnect it from the mains supply. To

completely isolate the equipment, remove the

plug from the mains jack as some components

remain connected to the electrical supply.

• Ifyounoticeanyburningorsmoke,disconnect

the unit immediately to avoid any risk of

electrocution.

• Donotattempttolookinsidetheunitthrough

the disk tray opening or any other opening.

You may be electrocuted or exposed to laser

radiation.

• Thisunitisfordomesticuseonlyandmustnot

be used for industrial purposes.

• Totalorpartialcopyingofrecordingsprotected

by copyright legislation, without the explicit

permission of the holder of the rights,

contravenes current legislation. Copying

or downloading music les for sale or any

other business purpose constitutes or could

constitute a violation of copyright law.

Cleaning

• Usea soft, dry, cleancloth. Regularlydust the

vents at the back or sides.

• Using solvents, abrasive or alcohol-based

products risks damaging the unit.

• If an object or liquid enters inside the unit,

unplug it immediately and have it checked by

an authorized servicer or service center.

Handling and caring for discs

• Handleyourdiscswithcare.Holdthediscwith

your ngers at the edges or through the hole.

• Insert the disc with the label facing up (for a

single-sided disc).

• Place the disc properly into the tray in the

allotted holder.

• Use a soft cloth to clean discs if necessary,

always wiping from the centre to the edge.

• Always put discs back in their cases after use

and store in a vertical position.

• Donotclosethetraywithtwodiscsinitorwith

a disc not sitting correctly in the holder.

• Do notplaycracked, chippedor warpeddiscs

nor try to repair them with adhesive tape or

glue.

• Donotwriteonadisc.

• Do not move the unit when a disc is being

played.

• Do not scratch discs or store them in places

exposed to direct sunlight, high humidity or

high temperatures.

• Donotuseaerosolcleaners,benzene,anti-static

liquids or any other solvent for cleaning discs.

When cleaning, wipe gently with a soft damp

(water only) cloth from the centre to the edge,

avoiding circular motions, which could cause

scratches and interference during playback.

DVD-Video

Digital video discs - 12 cm, single or

double sided, single or dual layer. DVDs

are high density optical discs on which

high quality picture and audio are

recorded by means of digital signals.

DVD-R, DVD-RW, DVD+R, DVD+RW

Most DVD-R and DVD+R (one recording

only), DVD-RW and DVD+RW discs

(rewritable), depending on the DVD

writer and discs used. Recordings using

DVD-R and DVD-RW discs must be made

in Video DVD mode. Recordings using

DVD+RW discs must be made in accordance with

the specications for DVD+RW discs with a 4.7 GB

capacity.

Audio CDs

Audio CDs (12 cm).

CD-R, CD-RW

Most CD-R (one recording only) and

CD-RW discs (rewritable).

CD-Rs written during a multisession recording can be

played, provided that the session has ended before

the disc is played (depending on the write software).



      

  

       



However, depending on the condition of the CD-

writer, computer and the disc used, you may nd

that not all discs will play. When playing a CD-R disc,

it is normal for the unit to take up to 60 seconds to

recognize the disc before starting to play.

If the disc is not recognized after a period of 120

seconds, remove the disc, and insert it again.

• Donotuseitsfullcapacity.

• CD-RsshouldbepreferablyusedinsteadofCD-

RWs (rewritable CDs) as, in certain cases, CD-RW

playback may be faulty.

• Usereliable,good-qualityCDwritesoftware.

• Closeallotherapplicationsonthecomputerto

ensure reliable CD-R disc recording.

Jpeg les

CD-R and CD-RW with jpeg les. Certain jpeg les,

in cluding progressive jpeg les, cannot be read by

this unit.

When composing your title, use 10 characters or less,

no spaces, and avoid the use of special characters

including (. , / , \ , = , +).

The total number of les and folders on the disc

should be less than 650.

Make sure that les have the “.jpg” extension. Files

without the “.jpg” extension will not be able to be

read by the unit --- even thought the les are shown

as jpeg images on your computer.

Sound Enhancement Systems

This receiver is equipped with several built-in

sound enhancement systems.

Manufactured under license

from Dolby Laboratories.

”Dolby”, “Pro Logic“, and

the double-D symbol

are trademarks of Dolby

Laboratories.

Technical Specications:

Amplier Section:

RMS Output Power: Dolby Digital Mode with 10%

Total Harmonic Distortion

Rear Channels: 32 Watts/channel (1kH, 4Ω)

Front and Center Channel: 32 Watts per channel

(1kHz, 4Ω )

Subwoofer Channel: 40 Watts (100Hz, 3Ω)

Total RMS Output Power, Dolby Digital mode: 200

Watts

Muting Attenuation: 70 dB

Frequency Response:

200Hz – 20KHz/3dB, 1KHz ref.

Subwoofer Frequency Response:

20Hz – 200Hz /-3dB, 100Hz ref.

Signal to Noise Ratio: 70 dB (Dolby Digital)

AM Tuner Section:

Frequency Response: 2kHz +/-3dB, 400Hz ref.

Usable Sensitivity: 3000uV/m @ S/N 20dB

Signal to Noise: 38dB

IF Rejection: 35dB

FM Tuner Section:

Frequency Response: 15kHz +/-3dB, 1kHz ref.

Quieting: 24dB

Signal to Noise: 62dB(stereo) / 65dB(mono)

IF Rejection: 70dB

Dimensions (H x W x D mm) :

Unit: 66 x 430 x 240

Front Speakers: 214 x 78 x 69

Center Speaker: 290.5 x 78 x 69

Rear Speakers: 214 x 78 x 69

Subwoofer: 312.5 x 155 x 273.5

AVC MULTIMEDIA ("AVC") makes the following limited warranty. These limited warranties extend to the

original consumer purchaser and is limited to non-commercial user of the product.

One Year Parts & Labor Warranty

AVC products purchased in the United States are warranted to be free from defects in materials or

workmanship for a period of one year from the date of their original retail purchase. If the unit fails to

conform to this warranty, we will service the product using new or refurbished parts and products, at

AVC's sole discretion.

During a period of one year from the eective warranty date, will provide, when needed, service AVC

labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the

United States, you must rst call our Customer Support Center at 1-800-506-5746 or 1-877-252-6873,

during the hours listed in the box below. The deternination of service will be made by AVC customer

support.

PLEASE DO NOT RE TURN YOUR UNIT TO AVC WITHOUT PRIOR AUTHORIZATION. New or

remanufactured replacements for defective parts or products will be used for repairs by AVC at its

designated Service Center for one year from the defective warranty date. Such replacement parts or

products are warranted for an additional one year from the date of repair or replacement. The Customer

will be required to ship the unit to the Service Center indicated at the time Customer Support is

contacted to make the necessary repairs. The customer is responsible for all transportation charges to

the service facility.

Packaging and Shipping Instruction

When you send the product to the service facility you must use the original carton box and packing AVC

material or an equivalent as designated by . AVC

Your Responsibility

(1) You must retain your bill of sale to provide proof of purchase.

(2) These warranties are eective only if the product is purchased and operated in the U.S.A. or Canada.

(3) Warranties extend only to defects in material or workmanship, and do not extend to any product or

parts which have been lost or discarded, or damage to product or parts caused by misuse, accident,

improper operation or maintenance, or use in violation of instructions provided with the product,

or to product which has been altered or modied without authorization of , or to products or AVC

parts thereof which have had the serial number removed or changed.

Out of Warranty

Dolby Pro Logic

The Pro Logic mode uses the built-in circuit to steer

the Left, Center, Right and Mono Surround channel

audio signals and uses all ve speakers to play both

stereo and Dolby Pro Logic program source, such

as TV and VCR.

You can use this mode with any stereo program

source (such as VCR/TV) to enjoy multi-channel

sound experience.

Dolby Digital

The Dolby Digital mode lets you enjoy full digital

surround from software processed in the Dolby

Digital format. Dolby Digital provides better

sound quality and a more powerful presence

than conventional Dolby Surround. This unit is

equipped with Dolby Digital 5.1-channel so that

you can enjoy enhanced full digital surround

sound. The new system provides stereo separation

of the rear speakers (Rear-Right, Rear-Left). Adding

the subwoofer channel to the 5 channels for bass

sounds (counted as 0.1 channel) results in 5.1

channels (or 6 Channels) that bring you the most

sophisticated Dolby Digital sound enjoyment.

DV D + R e w ri t a bl e

IMPORTANT!

Once Progressive Scan has been activated, an

image will only be visible on a progressive scan

TV or monitor. If you choose this option and you

don’t have a progressive scan TV or monitor,

you may get a picture with incorrect color or

no color.

Notes:

• If the selected language is not available

on a disc, the disc’s language will be used

instead.

• If the language chosen is available, it is

automatically selected when you display

the subtitles or press SUBTITLE on the

remote control. Otherwise, the subtitle

language indicated on the disc is selected.







      





Tips:

• When the FM station broadcasts Stereo

sound is found, ST is displayed.

• Whenyoumanually tuneintoaweakFM

station, press AUDIO on remote control to

switch from Stereo to Mono mode. This

will reduce the background noise.

• If there is any interference, change the

antenna’s position until ideal sound

reception is obtained. TV and other

electronic devices could be the cause

of interference, so try to position the

antenna away from them.

• A weak signal can aect the“Automatic

preset programming” function’s eciency.

Adjust the antenna for better reception

and a more ecient search.

Playing jpeg les

Jpeg les are image les. Make sure that they have

a resolution of less than 2 megapixels.

1. Open the disc tray.

2. Place the disc with the printed side facing up

and close the disc tray.

The folders on the disc will be listed in numerical

order on the left side of the screen. When you

highlight a folder, then press OK button. The list

of songs or pictures in the folder are listed in

numerical order on the right side of the screen.

3. Select a folder using the up/down arrow buttons

on the remote, then press the left arrow button

to move to the music/picture icons at the

bottom of the screen. Use the left/right arrow

buttons to select either music or picture mode.

4. Press the up arrow button to move to the le

list on the right side of the screen. Use the up/

down arrow buttons to select a le. Press OK or

PLAY to start playback.

5. The unit starts the slide show with the jpeg le

you have selected, then displays all the jpeg

les in the same folder, then all the jpeg les in

the subfolders located in the same folder. You

can set the amount of time a picture remians

on the screen in the General Setup menu.

LANGUAGE SETUP

With this menu, you can set the language for unit

menus, dialog, subtitles and the disc menus.

If you chose “English” during initial set-up, any

menus generated by the disc are in English, and

so is the language of the dialogs (if this language

is available on the disc).

1. Select the Language Setup icon in the main

menu using the left/right arrow buttons.

2. Select one of the options using the up/down

arrow buttons.

3. Press the right arrow button to move to the

language choices.

4. Use the up/down arrow buttons to highlight

the language of your choice and press OK.

Player Menu

Select the language of player menus and press

OK.

Audio

Select the dialog language using up/down arrow

buttons and press OK.

To change the Audio language during playback,

press INFO twice for DVD and use the left/right

arrow buttons to highlight the Audio icon.

Press the up/down arrow buttons or AUDIO on the

remote control to select audio language.

In the event your product requires repair after the limited warranty period has expired, please contact

our Customer Support Center at or 1-800-506-5746, 1-877-252-6873 www.RCAav.com

Hours: Monday-Thursday: 9am-7pm, Friday: 9am-5pm, Saturday: 9am-NOON Eastern time.

Important:

You are responsible for any transportation, shipping or insurance relative to the return of the product to

our Product Returns Center.

All warranties implied by state law, including the implied warranties of merchantability and tness for a particular

purpose, are expressly limited to the duration of the limited warranties set for th above. With the

exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive

and in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer

or seller with respect to the repair or replacement of any parts. In no event shall be liable for AVC

consequential or incidental damages.

No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms

of these warranties in any manner whatsoever. The time within action must be commenced to enforce

any obligation of arising under the warranty or under any statute, or law of the United States or any AVC

state thereof, is hereby limited to one year from the date of purchase. This limitation does not apply to

implied warranties arising under state law.

This warranty gives you specic legal rights and you may also have other rights, which may vary from

state to state. Some states do not allow limitation on how long an implied warranty lasts, when an action

may be brought, or the exclusion or limitation of incidental or consequential damages, so the above

provisions may not apply to you.

For more information on other products and services, please contact our web site at

www.RCAav.com

Important: Also keep your “Bill of Sale” as proof of purchase.

Model no. ................................................................................ Product name ...........................................................................

Type of set ............................................................................................................................................................................................

Serial no. .................................................................................. Invoice no. ................................................................................

Date purchased ..................................................................... Dealer name ..............................................................................

FOR SERVICE AND REPAIR, PLEASE VISIT

www. RCAav.com

Specications and external appearance are subject to change without notice.

Notes:

• WhenyoupressSTOP,theunitstoresthepoint

where playback was interrupted. If you press

PLAY again, playback resumes from this point.