Radial Engineering Workhorse Shuttle Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Radial Engineering Workhorse Shuttle (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
True to the Music
www.radialeng.com
Ā®
True to the Music
Ā®
User Guide
Shuttleā„¢ 500
Insert and Routing
500 Series Module
www.radialeng.com
Radial Engineering Ltd.
1588 Kebet Way, Port Coquitlam
British Columbia, Canada, V3C 5M5
tel: 604-942-1001 ā€¢ fax: 604-942-1010
email: info@radialeng.com
Radial Engineering Ltd. Shuttleā„¢ 500 Module
True to the Music
Ā®
RadialĀ® Shuttleā„¢ 500 User Guide
Table of Contents ......................................................Page
Feature Set .................................................................... 1
Overview ........................................................................ 2
Getting Started ............................................................... 3
Using the Loops ............................................................. 4
Omniport ........................................................................ 6
Patching External Sources ............................................. 8
Speciļ¬ cations ................................................................. 9
Block Diagram ................................................................ 9
Warranty ........................................................... Back cover
Congratulations and thank you for your purchase of the Radial Shuttle 500 module. The
Shuttle is a simple yet highly effective tool that will help you efļ¬ ciently route signals in and
out of your Workhorse or 500 series rack. In fact, it is probably one of those devices that you
will soon come to say: ā€œI wonder how I could have lived without it?ā€
To help you get there, we have written this short manual. Please take a few minutes to read
it through so that you can take full advantage of the features that are built in. Hopefully,
we have addressed all of your concerns. If however you do not ļ¬ nd all of the answers and
wisdom as you drop your bucket into the deep well of recording knowledge, visit the FAQ
page on our web site. This is where we post questions from users like you along with helpful
hints. If you do not ļ¬ nd what you are looking for, then send us an email at info@radialeng.
com. We will do our very best to answer your question in short order.
Get ready to plug in, out and in between!
True to the Music
Ā®
Radial Engineering Ltd. Shuttleā„¢ 500 Module
1
4
3
2
6
5
Rear Panel
1
FEATURE SET
1. LOOP-1 INSERT SWITCH: Inserts the
balanced loop into the signal path to
compare pre and post signals. Works with
all 500 series modules and racks.
2. LOOP-1 SEND & RECEIVE JACKS: Line-
level +4dB loop connects to pro-audio
processors with separate balanced send
and receive TRS jacks. Works with all 500
series modules and racks.
3. OMNIPORT INSERT LOOP SWITCH:
Inserts the Omniport loop into the signal
path to compare pre and post signals.
Available when used with the Radial
Workhorse.
4. LOOP-2 INSERT SWITCH: Inserts the
unbalanced loop into the signal path to
compare pre and post signals. Available
when used with the Radial Workhorse.
5. LOOP-2 SEND & RECEIVE JACKS: Line-
level -10dB loop connects to unbalanced
devices with separate 1/4ā€ phone jacks.
Available when used with the Radial
Workhorse.
6. OMNIPORT (Workhorse): TRS type
unbalanced insert jack conļ¬ gured TIP=
SEND; RING=RETURN. Available when
used with the Radial Workhorse.


Product specificaties

Merk: Radial Engineering
Categorie: Niet gecategoriseerd
Model: Workhorse Shuttle

Heb je hulp nodig?

Als je hulp nodig hebt met Radial Engineering Workhorse Shuttle stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Radial Engineering

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd