Radial Engineering StageBug SB-48 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Radial Engineering StageBug SB-48 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
www.radialeng.com
True to the Music
®
SB-48
POWERBAR
StageBug SB-48 User Guide - Part# R870 1221 00
© Copyright 2013 all rights reserved
Speci cations and appearance are subject to change without notice.
Radial Engineering Ltd.
1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9,
Canada
tel: 604-942-1001 • fax: 604-942-1010
info@radialeng.com
USER GUIDE
INTRODUCTION
Thank you and congratulations on your purchase of the Radial
StageBug SB-48 dual phantom power supply. We have purposely
written this manual to be short, as most users will likely be familiar with
the use of phantom power. We do suggest that you take a moment to
read through this document to familiarize yourself with the features
that are built into the SB-48. For more detailed information, please
visit the FAQ section on the Radial website. This is where we post
questions and answers that come from users after the product is
released. If you do not nd an answer, we invite you to send us an
email at info@radialeng.com and we will do our best to answer your
query in short order.
The StageBug SB-48 is a two channel phantom power supply
designed to provide condenser microphones and active direct boxes
with 12 or 48 volts of regulated power. The SB-48 can supply one or
two phantom powered devices and allows their use with audio systems
that do not supply phantom power on their own.
The SB-48 features XLR inputs and outputs wired to the AES standard,
an LED power indicator and comes complete with power supply.
An integrated lock-down clamp for the power supply cable protects
against accidental disconnection. To address speciality microphones
that require 12 volts, a recessed ‘set & forget’ switch reduces the
voltage output.
Radial Engineering Ltd. SB-48® Phantom Supply
Radial Engineering Ltd. SB-48® Phantom Supply
FEATURES
1. XLR-F INPUTS: Used to connect the mic signal to the StageBug
SB-48. Phantom power is generated inside the SB-48 and injected
into the mic capsule via the F-XLR connectors and mic cable.
2. POWER INPUT AND LED: The power jack accepts Radial’s
15VDC/400mA power adapter. The LED illuminates when the power
supply is connected and the SB-48 is active.
3. CABLE CLAMP: Used to lock down the power supply cable and
prevent accidental disconnection.
4. XLR-M OUTPUTS: Used to connect the mic signal to the mixing
console or preamp. Equipped to block other sources of phantom
power and prevent over-powering your condenser mic or active
direct box.
5. +12/48V SWITCH: Used to change the phantom supply from
the standard +48 volts to +12 volts for speciality microphones.
6. FULL-BOTTOM NO-SLIP PAD: This provides electrical isolation
and plenty of ‘stay-put’ friction to keep the SB-48 in one place.
6
4
3
5
1
2


Product specificaties

Merk: Radial Engineering
Categorie: Niet gecategoriseerd
Model: StageBug SB-48

Heb je hulp nodig?

Als je hulp nodig hebt met Radial Engineering StageBug SB-48 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Radial Engineering

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd