Radial Engineering Tonebone Hot British Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Radial Engineering Tonebone Hot British (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
TONEBONE
Owner’s Manual
1638 Kebet Way, Port Coquitlam BC V3C 5W9
tel: 604-942-1001 fax: 604-942-1010 email: info@radialeng.com
www.radialeng.com
â„¢
1. Introduction:
Congratulations on your purchase of the Radial Toneboneâ„¢
Tonebone pedals bring forth a level of quality and performance
never before realized in a tube distortion pedal. Whether set for
tones commonly described as 'edge', 'crunch', 'metal' or just
plain 'scream' the Tonebone gives you rich harmonics and deep
bass throughout a wide range of sounds.
This manual has been designed to show the user how to gain
access to those sounds and more. Once you have read through,
take time to experiment. You will find that the Tonebone is so
well designed; it is practically impossible to make it sound bad!
Most of all, enjoy. If it isn't fun, it isn't music!
1638 Kebet Way, Port Coquitlam BC V3C 5W9 www.radialeng.com
tel: 604-942-1001 fax: 604-942-1010 email: info@radialeng.com
www.radialeng.com
Index Page
1. Introduction ..................................................... 1
2. Unpacking, powering & getting connected ..... 2
3. Powering & getting connected ........................ 2
4. Using Tonebone – the starting point ............... 2
5. Tonebone Classic function overview .............. 3
6. Tonebone Hot British function overview ......... 4
7. Changing the tube ...................................... 5~6
8. Trouble shooting ............................................. 6
Factory setups - Classic ........................... 7~10
Factory setups - Hot British .................... 11~14
User setting charts - Classic ................... 15~16
User setting charts - Hot British ............. 17~18
Warranty ......................................... back cover
True to the Music
Owner’s Manual
1
â„¢
Radial is a division of JP Cabletek Electronics Ltd. Radial Toneboneâ„¢ manual V1.1 - 07-09-02
Specifications and appearence subject to change without notice.
2. Unpacking your Tonebone:
Your Radial Tonebone pedal has been thoroughly tested at the
factory, and comes with a 15VDC power supply and this owner’s
manual. We recommend that you keep the box and original
receipt in the unlikely event that you should need to send the
unit back for servicing.
3. Powering up and getting connected:
Before you start, turn your guitar amp volume down to zero.
Tonebone comes equipped with a special 15VAC power adapter
with enough power to drive the 12AX7 tube inside. When the power
suppy is connected, the Tonebone will be in standby mode. Like all
tube amps, for best tone let your Tonebone warm up for 5
minutes so that it achieves electrical and thermal stability. The
LED on the unit lights up when the foot switch is depressed to
indicate it is powered up and ready for use.
4. Using Tonebone – The starting point:
Start with all the controls at 12 o’clock and switches set to the
off or flat position. Turn your amp up to a comfortable listening
level and adjust the LEVEL output control for unity gain, i.e.: the
level with Tonebone on (LED is on) matches the level with it off
(LED off). Now start turning knobs!
You will find that most of the controls are intuitive and extremely
sensitive to changes. In other words, small control changes will
make big changes in the sound. Take your time and experiment.
It is important to note that both the Tonebone Classic and the
Tonebone Hot British are ultra-high gain devices that have been
designed to provide ‘over-compensation’ control on all functions.
What this means is that each control when set to maximum is able
to compensate for other controls that may be completely backed
off. For instance, you may have your LEVEL wide open and your
DRIVE almost fully off. This gives you maximum flexibility but also
opens the door to over-saturation, which could lead to
uncontrollable feedback. To safeguard against this, you should
never drive all functions to maximum.
At the back of this manual are a number of setups for popular
sounds for both Tonebone models. Note that you will have to
tweak the settings shown on the setup chart to match your
specific guitar and amp set up.
In addition to the factory sound charts, a number of blank user
setting charts are included at the back of this manual.
Photocopy these handy charts and use them to save your own
‘found sounds’. Once you get a sound you like, chart the knob
positions and guitar/amp/pickup setting. These setup charts will
aid in you in getting familiar with the controls of your new
Tonebone, and help in quickly recreating your exact sounds in
the studio.
Now Go Play!
2


Product specificaties

Merk: Radial Engineering
Categorie: Niet gecategoriseerd
Model: Tonebone Hot British

Heb je hulp nodig?

Als je hulp nodig hebt met Radial Engineering Tonebone Hot British stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Radial Engineering

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd