Radial Engineering SixPack Handleiding

Radial Engineering Niet gecategoriseerd SixPack

Lees hieronder de 📖 handleiding in het Nederlandse voor Radial Engineering SixPack (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/16
True to the Music
www.radialeng.com
®
True to the Music
®
User Guide
Workhorseâ„¢
SixPackâ„¢
500 Series Rack
www.radialeng.com
Radial Engineering Ltd.
1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9, Canada
tel: 604-942-1001 • fax: 604-942-1010
email: info@radialeng.com
IMPORTANT SAFETY & USER NOTICE
FOR PROFESSIONAL USE ONLY
Radial 500 series power racks are speciîš¿cally designed for use by
qualiîš¿ed professional audio engineers. The open frame design is not
intended for use by consumers or those unfamiliar with this format.
Even though the current and voltage levels are relatively low, we
recommend that all slots be îš¿lled with a module or covers be placed
over unîš¿lled slots. This will help protect you from electrical shock.
These power racks are designed to be used with 500 series modules
manufactured by Radial or others that follow the 500 series format.
Even though there is no formalized standard, Radial has endeavored
to take every step possible to ensure cross-brand compatibility. To this
end, Radial has produced a free PDF download called the Workhorse
Open Source Document (Whos.Doc) that outlines the mechanical
and electrical requirements for module designs. Manufacturers are
invited to consult this document in order to assist in assuring cross-
platform compatibility with both current and older 500 series formats.
Users should also consult this document and ensure the module
being used follows the prescribed pin-out conîš¿guration.
The user should ensure that the module current requirements do
not exceed the available current provided by the power rack. It is
also important that when securing the module to the frame that the
retainer screws not be over tightened or cross threaded. This will
prevent damaging the treads and ensure a longer rack life.
Finally, hot swapping or exchanging modules when power is on
can shorten the life of the card-edge connector. Although Radial
has incorporated extra safety measures, hot swapping is not
recommended. Damage caused by hot swapping is not covered
under the Radial Limited Warranty. The user is responsible for any
damage to the racks or modules arising out of hot swapping and the
user shall save Radial Engineering Ltd. harmless should any damage
occur. Please consult the Radial Limited Warranty for further details.
! !
Radial Workhorse SixPack
500 Series Power Rack
â„¢ â„¢
®
Table of Contents Page
Feature set overview ....................................................................................................1
Introduction and basic functions ...................................................................................3
Feed and Link Functions ..............................................................................................4
D-sub and Omniport .....................................................................................................5
Power supply capacity ..................................................................................................6
Sliding modules in and out ...........................................................................................7
Signal ow and levels ..................................................................................................8
Basic XLR, TRS and D-sub connections ......................................................................9
Setting up a channel strip .............................................................................................10
Using the front inputs....................................................................................................11
D-sub channels 7 and 8................................................................................................11
Speciîš¿cations ...............................................................................................................12
Radial Limited Warranty ................................................................................Back Cover
Congratulations and thank you for purchasing the Radial Workhorse SixPack, an innovative
six slot power rack designed for the 500 series modular format. This guide describes how to
install modules safely and maximize the use of the SixPack features. We recommend that
you sit back, have a coffee and take a few minutes to read it to familiarize yourself with the
many innovative features that are built in.
To make this guide as easy to understand as possible, we have divided it into several sections.
It begins with an overview, then descriptions of each function, ending with some real world
applications. Should you îš¿nd yourself asking a question that is not addressed, we invite you
to view the SixPack FAQ page on our web site. This is where we post the latest hints and of
course questions from users. If you still do not îš¿nd what you are looking for, feel free to send an
email to info@radialeng.com and we will do our best to answer your question in short order.

Product specificaties

Merk: Radial Engineering
Categorie: Niet gecategoriseerd
Model: SixPack

Heb je hulp nodig?

Als je hulp nodig hebt met Radial Engineering SixPack stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Radial Engineering

Radial Engineering

Radial Engineering JD-7 Handleiding

11 Juli 2024
Radial Engineering

Radial Engineering SixPack Handleiding

11 Juli 2024
Radial Engineering

Radial Engineering Dragster Handleiding

21 Juni 2024
Radial Engineering

Radial Engineering BigShot EFX Handleiding

21 Juni 2024
Radial Engineering

Radial Engineering EXTC Handleiding

21 Juni 2024
Radial Engineering

Radial Engineering BigShot Handleiding

21 Juni 2024
Radial Engineering

Radial Engineering JX42 Handleiding

21 Juni 2024
Radial Engineering

Radial Engineering Headbone VT Handleiding

21 Juni 2024
Radial Engineering

Radial Engineering Nuance Select Handleiding

18 Maart 2024
Radial Engineering

Radial Engineering JDX 48 Handleiding

5 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Livarno Lux

Livarno Lux IAN 57012 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 57013 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 383951 Handleiding

17 November 2024
Palmer

Palmer Vils Handleiding

17 November 2024
Palmer

Palmer Wipper Handleiding

17 November 2024
Palmer

Palmer PLI 04 Handleiding

17 November 2024
Palmer

Palmer Pedalbay 60 PB Handleiding

17 November 2024
Palmer

Palmer PAN 02 PRO Handleiding

17 November 2024
Supermicro

Supermicro SC813T-500C Handleiding

17 November 2024
Elcom

Elcom REN705S Handleiding

17 November 2024