Radial Engineering Power-2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Radial Engineering Power-2 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Speciîš¿cations and appearance are subject to change without notice.
Copyright © 2021 Radial Engineering Ltd.
www.radialeng.com
O ’ Mwner s anual
Radial Engineering Ltd.
1845 Kingsway Ave, Port Coquitlam BC V3C 1S9
Tel: 604-942-1001 • www.radialeng.com
Email: info@radialeng.com
True to the Music
Radial Engineering Ltd. Power-2 Owner’s Manual
INTRODUCTION
The Radial Power-2 rackmount power supply and surge suppressor gives musicians, engineers, producers,
studio owners, commercial facilities, and anyone working with valuable electronic equipment protection from
power surges that can damage or destroy music equipment instantaneously.
Unlike competitive products that utilize low quality MOV’s (Metal Oxide Varistors) for surge protection, Radial’s
Power-2 is built using a USA made MOV. This critical component has been proven to o󰀨er superior thermal
protection and have a much longer lifespan than the alternatives. An LED indicator on the front panel illuminates
when the MOV is active, giving you visual conîš¿rmation that your gear is protected from voltage spikes.
Created with audio professionals in mind, the Power-2 employs shunt mode technology and avoids passing
contaminated signals to the ground for lower system noise. Additionally, a high-rejection RF interference îš¿lter
is used to keep high frequencies and AM radio signals out of the power line, preventing contamination of audio
signals.
Additionallly, the Power-2 can be used to illuminate the gear in your equipment rack, allowing you to make
adjustments on the y without the need to reach for a ashlight. An innovative sliding tray allows you to light
up as much or as little rack gear as you like, using LEDs that provide a super-bright & evenly distributed light
source. A dim knob is provided to adjust the brightness level, with an additional switch to vary the color of the
LEDs between seven di󰀨erent options.
Eight rear panel outlets are provided (four with wall-wart spacing to accommodate any PSU size), along with a
front panel outlet and a USB charging port to easily power personal devices. A heavy-duty power on/o󰀨
toggle switch, rugged outlet connectors, and steel construction ensure that the Power-2 performs night after night
without fail.
1
Front USB
Power
Surge
Protect
Back
8
LED Lamp Noise
Filtering
BEFORE YOU GET STARTED
Thank you for purchasing the Radial Power-2 rackmount power supply unit. Before using the Power-2, please
read this short manual and heed all warnings and safety precautions listed. Your safety is our top priority! Should
you have any questions, please review the FAQ page for this product at www.radialeng.com, or contact us directly
at support@radialeng.com.
Note: The Power-2 is a surge suppressor, meaning it blocks high voltage spikes that can damage connected
equipment. It does not, however, regulate or stabilize the incoming voltage; this is a task that requires a product
called an AC voltage regulator, and may be beneîš¿cial for applications where unreliable or unsteady power
sources are employed.


Product specificaties

Merk: Radial Engineering
Categorie: Niet gecategoriseerd
Model: Power-2

Heb je hulp nodig?

Als je hulp nodig hebt met Radial Engineering Power-2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Radial Engineering

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd