Radial Engineering JR1M Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Radial Engineering JR1M (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
www.radialeng.com
True to the Music
USER GUIDE
Radial® JR•1 User Guide - Part #R870 1219 00 / 10-2021
© Copyright 2014 all rights
reserved. Specifi cations and appearance are subject to change without notice.
Radial Engineering Ltd.
1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9, Canada
Tel: 604-942-1001 • Fax: 604-942-1010
info@radialeng.com
REMOTE FOOTSWITCH
®
Radial Engineering Ltd. JR•1
FEATURES
1. COMBO: Used to
connect to remote
device, provides locking
connection for ¼" TRS
or XLR-male terminated
cable.
2. ACTIVE/PASSIVE:
Selects active mode for
use with Radial devices
or passive mode for
standard footswitch
operation.
3. XLR-M: Used to connect
to remote device,
provides alternate
connection for XLR-
female cable.
4. A/B LED: Provides
local visual status of
the remotely controlled
device.
5. LATCHING: The JR•1L is
equipped with a latching
footswitch that will
change states each time
it is pressed.
6. MOMENTARY: The
JR•1M is equipped with
a momentary footswitch
that will change states
only when held down.
7. YELLOW & BLACK:
Yellow top is highly visible
on dark stages while
black casing is ‘invisible’
from the audience
perspective.
1 2 3
4 6 7
1 2 3
54 7
INTRODUCTION
Thank you for purchasing the Radial JR•1 footswitch. Please take a few moments
to read this short manual and familiarize yourself with the various functions. This
will help you get the most out of the JR•1 as you explore its uses. Should you
have a question that is not covered in this manual, we invite you to send us an
email at info@radialeng.com and we will do our very best to reply in short order.
OVERVIEW
The Radial JR•1 is a remote footswitch equipped with either a latching footswitch
(JR•1L) or momentary footswitch (JR•1M) depending which model you have
purchased. The JR•1 controls various Radial devices, such as the Relay Xo
stereo switcher, and derives its power from the device under control, thus
eliminating the need for a local power supply or batteries.
LATCHING: The JR•1L is equipped with a latching footswitch
that will change states each time it is pressed. Press the switch
once to toggle from A to B and press again to change back to A.
The latching footswitch is a good option when switching effects
that stay on for the duration of a song.
JR•1L
EFFECTS
RELAY
Xo
MIXERVOCAL MIC
MOMENTARY: The JR•1M is equipped with a momentary
footswitch that will change states only when held down. Press
and hold the switch to toggle from A to B and release the switch
to change back to A. The momentary footswitch is well suited for
‘push-to-talk’ uses like toggling to an intercom system to speak
with stage technicians.
JR•1M
RELAY
Xo
INTERCOM
PA SYSTEMVOCAL MIC
Radial Engineering Ltd. JR•1


Product specificaties

Merk: Radial Engineering
Categorie: Niet gecategoriseerd
Model: JR1M

Heb je hulp nodig?

Als je hulp nodig hebt met Radial Engineering JR1M stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Radial Engineering

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd