Radial Engineering Headload Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Radial Engineering Headload (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
www.radialeng.com
®
True to the Music
User Guide
Guitar Amp Load Box and Direct Box
www.radialeng.com
Radial Engineering Ltd.
1588 Kebet Way, Port Coquitlam
British Columbia, Canada, V3C 5M5
tel: 604-942-1001 • fax: 604-942-1010
email: info@radialeng.com
®
IMPORTANT SAFETY & USER NOTICE
PLEASE READ BEFORE
CONNECTING YOUR RADIAL HEADLOAD
ALWAYS TURN YOUR AMPLIFIER OFF
BEFORE CONNECTING OR DISCONNECTING
It is your responsibility to con rm the Headload is connected properly before
operating your ampli er. If you are unsure about connecting or operating the
Headload consult a quali ed technician or see your dealer. Damage caused by
improper operation is not covered under the warranty. See the back cover for
warranty details.
ALWAYS USE THE HEADLOAD WITH A SPEAKER CABINET
A speaker cabinet must be connected to the Headload at all times. It is pos-
sible to use the Headload as a dedicated load box without a speaker connect-
ed but this is not a recommended practice as you may damage the Headload
or your amp if the LOAD SWITCH is not in the propper setting. Damage due
to misuse is not covered under the Radial 3-year warranty.
CAUTION - USE OF THE HEADLOAD WITH AMPLIFIERS WITH BRIDGED
OR BALANCED SPEAKER OUTPUTS IS STRICTLY PROHIBITED.
Although these types of circuits are rarely employed on instrument amps, us-
ing the Headload with them can cause an electrical shock. Please consult the
ampli er manufacturer to ensure the power output section of your amp is not
bridged or balanced. As we have no control over the use of these amps, for legal
liability reasons, Radial Engineering Ltd. strictly prohibits use of the Headload
with such ampli ers.
DO NOT BLOCK THE AIR VENTS
It is normal for your Headload to get warm during operation. The Headload fan
draws cool air in through the front, top and sides and exhaust hot air out through
the rear. Do not block the air vents and always provide a minimum of 2.5cm (1”)
of open air space around the Headload when in use.
HEADPHONE SAFETY WARNING
As with all products capable of producing high sound pressure levels (SPL), users
must be very careful to avoid hearing damage that may occur from prolonged
exposure. This is particularly important as it applies to headphones. Prolonged
listening at high SPLs will eventually cause Tinnitus and can lead to partial or
complete loss of hearing. Please be aware of the recommended exposure limits
within your legal jurisdiction and follow them very closely. The user agrees that
Radial Engineering Ltd. remains harmless from any health effects resulting from
the use of this product and the user clearly understands that he or she is entirely
responsible for the safe and proper use of this product. Please consult the Radial
Limited Warranty for further details.
! !
Radial Headload
Guitar Amp Load Box
User Guide
®
Table of Contents ..................................................... Page
Overview................................................................................................1
Features and Functions .........................................................................3
Unpacking and Optional Rackmount Kit ................................................ 5
Getting Started ......................................................................................6
Connectiing the Amp and Speaker ........................................................ 7
Using the Attenuator/Loadbox ..............................................................8
Connecting the JDX Balanced Outputs ................................................. 9
Using the JDX......................................................................................10
Using the Phazer ................................................................................. 11
Speci cations ...................................................................................... 12
Radial Limited Warranty ....................................................... Back Cover
Congratulations and thank you for purchasing the Radial Headload, an
innovative speaker power attenuator, loadbox and guitar amp direct box.
The Headload is a unique tool that lets you drive your amp hard for great
tone while keeping speaker volume low. This lets you optimize the tone
from your guitar ampli er without having to perform at ear-blistering levels.
The Headload features a built-in JDX amp DI that captures the natural
tone of your ampli er/speaker and interfaces it with professional PA and
recording systems. The Headload has also been equipped with a Radial
Phazer. This phase adjustment tool lets you time-align the JDX direct
output with a microphone to deliver incredibly natural tones, or when
pushed to extreme, create over the top effects.
The Headload is easy to use, however it differs signi cantly from standard
attenuators. We recommend you take a few minutes to read this manual
before operating your Headload. Should you have any questions, check
the Headload FAQ page at www.radialeng.com. This is where we post
questions from users and informational updates. If you would like to
share your experience with Radial products we invite you to contact us
at info@radialeng.com or on Facebook at www.facebook.com/radialeng.


Product specificaties

Merk: Radial Engineering
Categorie: Niet gecategoriseerd
Model: Headload

Heb je hulp nodig?

Als je hulp nodig hebt met Radial Engineering Headload stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Radial Engineering

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd