Radial Engineering Catapult MINI Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Radial Engineering Catapult MINI (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Radial± Smart Sheet
Radial Engineering Ltd. • © Copyright 2018 all rights reserved • www.radialeng.com • email info@radialeng.com • Subject to change without notice • Made in Canada
Catapult Mini ± a n a l o g a u d i o s n a k e
The Catapult Mini RX and TX act like a typical four-channel analog audio snake; they allow
you to send mic or line-level signals from one location to another without signal loss, noise,
or interference, and without any digital audio conversion needed. What makes the Catapult
system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight,
and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules
and they will use the analog conductors in the cable to deliver four balanced audio lines to
any destination.
Features
• Send four channels of analog audio over a
single Cat 5 cable
• Works with a building’s existing cable
infrastucture
• Compact and light weight, yet durable and
rugged
• Economical Cat 5 cable replaces bulky multi-
channel audio snakes
Beneîš¿ts
• Allows you to easily interface your laptop and
soft-synth
• Eliminates the need to carry a large mixer
• Separate control for stage lets you adjust
signal as needed
• Transformer isolation eliminates hum and
buzz from ground loops
Cool Stuff
• Built-in sustain footswitch eliminates the need
to carry one
• Effects loop footswitch lets you activate delay
when soloing
• Connect MIDI gear and controllers with your
laptop
• Can be used as a high quality 24bit/192kHz
recording interface
STEEL CHASSIS – 16-gauge
steel housing to handle any
touring environment.
EXPANDO MESH SHEATHING
– Provides extra durability and
protects cables from damage.
RJ45 CONNECTOR – Send or
Receive analog audio over Cat 5
Ethernet cable.
COLOR-CODED HEATSHRINK
LABELS – Used to identify
channels at a glance.
FEMALE XLR
INPUTS
(Catapult Mini TX) –
Heavy-duty XLRs to
connect to balanced
mic or line level
devices.
Catapult Mini RX
features male XLR
connectors.
Catapult Mini TX (Female XLRs) Order # R800 8028 00
Catapult Mini RX (Male XLRs) Order # R800 8029 00
Using the The Mini TX with the Mini RX:
The Mini TX and RX can be directly connected using a single Cat 5
cable, providing you with a robust 4-channel analog audio snake that
can deliver balanced signals over long distances while maintaining high
quality audio.
Cat 5
Catapult Mini RX pictured.
Take advantage of pre-existing Cat 5 wiring:
Use the Ethernet cables already wired throughout a building to send
audio from one room to the other without additional installation or
messy cables.
Room 1 Room 2
Mix and Match:
All Radial Catapult modules
are compatible with each
other, so you can select the
combination that best suits
your needs. For example,
Pair the full-sized Catapult
TX4 with the Catapult Mini
RX for a compact snake from
the stage to FOH.
The Catapult TX4M and RX4M.


Product specificaties

Merk: Radial Engineering
Categorie: Niet gecategoriseerd
Model: Catapult MINI

Heb je hulp nodig?

Als je hulp nodig hebt met Radial Engineering Catapult MINI stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Radial Engineering

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd