Radial Engineering Cabbone EX Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Radial Engineering Cabbone EX (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Radial Cabbone
www.radialeng.com
Owner’s Manual
Radial Engineering
1638 Kebet Way, Port Coquitlam BC V3C 5W9
tel: 604-942-1001 • fax: 604-942-1010
email: info@radialeng.com • web: www.radialeng.com
Radial Engineering is a division of C•TEC (JP CableTek Electronics Ltd.)
Part # R800 7060 00
Radial Engineering Cabbone Owners Manual
True to the Music
1
Radial Cabbone Owner’s Manual
TABLE OF CONTENTS PAGE
Introduction ......................................................................1
Feature set ......................................................................2
Quick start .......................................................................3
Getting to know your Cabbone ........................................5
Slingshot remote control ..................................................8
Built in safety features .....................................................10
Warranty ..........................................................................Back Cover
INTRODUCTION
Congratulations on the purchase of the Radial Cabbone. This clever
device has been designed to allow you to toggle between two different
speaker cabinets from one guitar amplifier head. This opens the door
to greater flexibility on stage and creative new sounds in the studio.
The Cabbone also introduces a remote control system we call Sling-
shot™ that is designed to enhance the Cabbone’s performance when
utilized as part of a guitar switching system.
As with all Radial Tonebone products, the Cabbone combines the very
finest components with an innovative circuit design to ensure the tone
of your instrument and amplifier is maintained while noise and distor-
tion is minimized. We believe that our relentless attention to detail sets
Radial apart from others and keeps our products working for years
without service.
Please take the time to read through this manual before operating your
Cabbone. This will allow you to take advantage of all of the features
that have been included and ensure the safe operation of your ampli-
fier system. Furthermore, it is a good idea to occasionally visit www.
tonebone.com for the latest updates and to peruse the question &
answer section. This is where we post new questions that arise after
products are released and is a great resource for new ideas. If, after
consulting the FAQ, you have a question that is not answered, please
feel free to send us an email at info@tonebone.com and we will do our
very best to get back to you promptly.
Now sit back, read, and then be prepared to change the way you have
been playing guitar forever!
FEATURE SET
6. From amp input jack
Used to receive the speaker output
signal from the amp head. Maxi-
mum input 120 watts.
7. Speaker-1 output jack
Used to connect to your
main speaker cabinet.
8. ALT-Z input jack
Des i g n e d f o r amps
that are equipped with multi-tap
transformers with various speaker
impedance options to properly
match amp and speaker loads.
9. Speaker-2 output jack
Used to connect to your second
speaker cabinet.
10. LED indicators
Large, easy to see LED indicators
for instant visual monitoring of
speaker cabinet status.
11. Footswitch On
board footswitch is used to select be-
tween speaker cabinet one or two.
True to the Music
Radial Engineering Cabbone Owners Manual
2
1. Power supply input
15VDC supply is included with the
Cabbone.
2. Slingshot remote output Can
be used to send a channel change
command to the guitar amplifier or
to another Cabbone for large multi-
amp stage set-ups.
3. Remote output assign
Allows you to configure the output
switching to match your amplifier’s
footswitch configuration for latching
or momentary operation and tip or
ring positive with dual function ¼”
TRS switch types.
4. Slingshot remote input
Used to receive a status change
command from a remote foot-
switch, another Slingshot equipped
pedal, or a MIDI controller.
5. FT SW assign
Allows the Cabbone to receive
speaker status change commands
from the on-board footswitch, or
from an external device. When set
to external, the Cabbone’s foot-
switch is defeated.


Product specificaties

Merk: Radial Engineering
Categorie: Niet gecategoriseerd
Model: Cabbone EX

Heb je hulp nodig?

Als je hulp nodig hebt met Radial Engineering Cabbone EX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Radial Engineering

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd