QTX TinyMover Handleiding

QTX Verlichting TinyMover

Lees hieronder de 📖 handleiding in het Nederlandse voor QTX TinyMover (5 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/5
www.avsl.com 150.4 UK User Manual 61
TinyMover
3- -1 40W LED Mini Moving Head in
Item ref: 0.4 15 61UK
User Manual
Perfect for smaller venues, this compact yet surprisingly bright 3- -1 mini moving head features in
multicoloured ball and ring effects and a sharp green laser. Easily operated using internal auto or sound to
light programs or by /24 channel DMX connection for more precise control, the TinyMover can be free 20
standing or mounted to trussing using the supplied brackets and provides bright and colourful coverage
f such a small unit. or
In the box:
Your TinyMover should arrive with you in a single carton in good condition. T carton should contain he
1 x main unit with bracket, 1 x UK IEC mains lead and 1 x manual.
Warning:
To prevent risk of re or electric shock, do not expo the unit to rain or damp environments. In the event fi se
of a spillage, disconnect the mains and al w the unit to dry out naturally. Qualified personnel should then lo
check the unit before continuing use.
Please read rough this manual thoroughly before use, any dama th ge
cause by misuse of product will not be covered by warrantd y.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 0.4 UK User Manual 15 61
Caution: Las radiation er
Avoid pointing direc towards eyes. Laser output can cause injury if viewed directly. tly
This product is a Class 3B laser and should only be installed and used by persons who
are trained in the management of laser radiation and are able to op ate in accordance er
within the guid ance given by the Health and Safety Executive (HSE) in HS(G)95: “The
Radiation Safety of Lasers used for Display purposes”. Copies of this guide can be
downloaded from: www.avsl.com/assets/docum /hsg95.pdfents
Placement:
• Use the included mounting bracket to fix to a stand or lighting truss.
• Keep away from damp or dusty environments.
• Ensure adequate air- ow around the fixture housings. fl
• Ensure ade ate access tqu o controls and connections.
• Do not aim LED or laser output directly into line of sight, as this can result in eye injury.
Cleaning:
• Use a soft cloth with a neutral detergent to clean the casing as required.
• Use a vacuum cleaner to clear venti tion gr of any dust or debris build-ups. la illes
• Do not use strong solvents for cleaning the unit.
Rear panel and controls:
1.
2.
3.
4.
5.
6.
7.
8.
9.
0.461U r Manu15 K Use al
1. Menu button
2. Up button
3. Down button
4. LED display
5. Enter button
6. IEC input (110-240 Vac, 50/60 Hz)
7. DMX output
8. DMX input
9. Laser key (on side)
Manual control menu:
Press the “ ” buttoMENU n to enter the settings menu.
Press “ ” and “UP DOWN” buttons to navigate through various setting functions.
Press button confirm the desired setting. “ENTER” to
Menu
Description
Addr
DMX addres settings s
CHnd
DMX channel select
SLnd
Master or slave select
Shnd
Sound active modes
Auto
Auto mode select
Auto mode speed select (slow to fast)
Sens
Sound active mode sensitivity adjust
LED
LED display setting
diSP
LED display reverse
Pan
X-axis positive phase/X-axis reverse phase
Tilt
Y-axis positive phase/Y-axis reverse phase
Ver
Software version
Rest
Factory reset
DM mode: X
The TinyMover can be controll by DMX signal, simply connect the DMX signal source the DMX input ed to
on the unit a balanced XLR lead. Extra fixtures can be controlled by the same DMX signa by looping vi a l
through the DMX out on the To ent X mode, select A001 from the menu and co the correct unit. er DM nfirm
start address using the and buttons and The A on the LED display will begin by “ ”UP “ ”DOWN “ ”ENTER .
to flash once it s received the DMX signal from the controller. This unit has or 24 DMX ch nels as ’20 an
indicated in the tables below:
20 Channel:
Channel
Value
Description
1
0- 255
PAN adjust
2
0- 255
Tilt adjust
3
0- 255
Motor speed
4
0- 255
Master dimmer
5
0- 255
LED ball red dimmer
6
0- 255
LED ball green dimmer
7
0- 255
LED ball b dimmer lue
8
0- 255
LED ball white dimmer
9
0- 255
Strobe LED ring 1 red
10
0- 255
Strobe LED ring green 1
11
0- 255
Strobe LED ring blue 1

Product specificaties

Merk: QTX
Categorie: Verlichting
Model: TinyMover

Heb je hulp nodig?

Als je hulp nodig hebt met QTX TinyMover stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Verlichting QTX

QTX

QTX Recharge Performer Handleiding

4 September 2023
QTX

QTX Wash & Beam Handleiding

4 September 2023
QTX

QTX TetraCube Handleiding

4 September 2023
QTX

QTX BATPAR-18W Handleiding

4 September 2023
QTX

QTX TinyMover Handleiding

4 September 2023
QTX

QTX Recharge DJ Handleiding

4 September 2023
QTX

QTX Multi-Bar Handleiding

4 September 2023
QTX

QTX SpectraWash Handleiding

4 September 2023
QTX

QTX DP4 Handleiding

20 Juni 2023
QTX

QTX MBM-1 Handleiding

18 Juni 2023

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Chauvet

Chauvet CP Rack Handleiding

4 November 2024
Fuzzix

Fuzzix PLB20S Handleiding

4 November 2024
Fuzzix

Fuzzix MBM400 Handleiding

4 November 2024
Fuzzix

Fuzzix DJ10 Handleiding

4 November 2024
BeamZ

BeamZ MBM220 Handleiding

4 November 2024
Hudson Valley

Hudson Valley Arietta 6500-AGB Handleiding

3 November 2024
Hudson Valley

Hudson Valley Whately 3405-GB Handleiding

3 November 2024
Hudson Valley

Hudson Valley Humphrey 4817-AGB Handleiding

3 November 2024
Livex Lighting

Livex Lighting Legacy 5021-01 Handleiding

3 November 2024
Livex Lighting

Livex Lighting Coronado 6121-91 Handleiding

3 November 2024