QTX Pentaflash Handleiding

QTX Verlichting Pentaflash

Lees hieronder de πŸ“– handleiding in het Nederlandse voor QTX Pentaflash (4 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
www.avsl.com 151.743UK User Manual
Pentaflash
5 in 1 LED and Laser Effect light
Item ref: 3 151.74 UK
User Manual
Thank you for choosing the QTX Pentaflash LED and Laser Effect Light. A compact and lightweight 5- -in 1
light effect, combining a 12W RGBW Effect ball, 4x White Strobe/UV Ds, 4x 6W RGBW PARs and Dual LE
colour Laser in one convenient fixture. Easy to setup and use via an array of integrated automatic
programs or sound to light. More precise control is provided via either 18-channel DMX connection or the
included IR remote co rol. nt
In the box:
Your n flash should arrive with you in a single carton in good condition. T carton should contain Pe ta he
1 x main unit with bracket, 1 x UK IEC mains lead and 1 x manual.
Warning:
To prevent risk of fire or electric shock, do not expo the unit to rain or damp environments. In the event se
of a spillage, disconnect the mains and al w the unit to dry out naturally. Qualified personnel should then lo
check the unit before continuing use.
Please read rough this manual thoroughly before use, any dama th ge
cause by misuse of product will not be covered by warrantd y.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 151.743UK User Manual
Caution: Laser radiation
Avoid pointing direc y towards eyes. Laser output can cause injury if viewed directly. tl
This product is a Class 3B laser and should only be installed and used by persons who
are trained in the management of laser radiation and are able to operate in accordance
within the guidance given by the Health and Safety Executive (HSE) in HS(G)95: β€œThe
Radiation Safety of Lasers used for Display purposes”. Copies of this guide can be
downloaded from: www.avsl.com/assets/docum ts/hsg95.pdfen
Placement:
β€’ Use the included mounting bracket to fix to a stand or lighting truss.
β€’ Use secondary safety fixings if mounting overhead.
β€’ Keep away from damp or dusty environments.
β€’ Ensure adequate airflow around the fixture housings.
β€’ Ensure a ate access to controls and connections. dequ
β€’ Do not aim LED or laser output directly into line of sight, as this can result in eye injury.
Cleaning:
β€’ Use a soft cloth with a neutral detergent to clean the casing as required.
β€’ Use a vacuum cleaner to clear venti tion grilles of any dust or debris build-ups. la
β€’ Do not use strong solvents for cleaning the unit.
Rear panel controls:
1. LCD display
2. DMX signal out
3. IEC mains in
4. Manual control
buttons
5. Laser key
6. DMX signal in
Manual control menu:
Press the β€œ ” buttoMENU n to enter the settings menu.
Press β€œ ” and β€œUP DOWN” buttons to navigate through various setting functions .
P button confirm the desired setting. ress β€œENTER” to
2.
1.
3.
4.
5.
6.
www.avsl.com 151.743UK User Manual
Menu
Description
A001
DMX address settings
LE1
Magic ball red slow to fast –
LE2
Magic ball green slow to fast –
LE3
Magic ball blue slow to fast–
LE4
Magic ball white slow to fast –
LE5
Magic ball auto run slow to fast –
LS
Lase auto run slow to fast r –
Pu
UV light low to high –
Par
Red wash low to high –
Green wash low to high –
Blue wash low to high –
White wash low to high –
Colour wash auto ru slow to fast n –
FL
Strobe slow to fast –
Au
Auto run (all features) slow to fast –
S1
Sound to light sequence 1 sensitivity high to low –
S2
Sound to light sequence 2 sensitivity high to low –
Remote co rol: nt
The Pentaflash comes supplied with an IR remote control, please see below for buttons and functions:
1. Power on/off
2. Auto run mode
3. Par Wash modes
4. Sound to light modes
5. Magic ball modes
6. Laser modes
7. Strobe mode
8. Motor speed (increase/decrease)
9. Auto speed (increase/decrease)
10. Sensitivity (increa /decrease) se
DMX mode:
The Pentaflash can be controll by DMX signal, simply connect the DMX signal source the DMX input ed to
on the unit a balanced XLR lead. Extra fixtures can be controlled by the same DMX signa by looping vi a l
through the DMX out on the To enter DMX mode, select A001 from the menu and co m the correct unit. nfir
start address using the and by β€œ ”UP β€œDOWN ENTER” β€œ buttons and ”. The A on the LED display will begin
to flash once it s received the DMX signal from the controller. This unit has DMX channels as indicated ’18
in the table below:
Channel
Function
DMX value and description
1
Motor
0- rotation position (0-340Β°) 127
128 255 - motor rotation (fast to slow)
2
Rotation amplitude
0- Motor self- ving range -340Β°) 255 mo (0
3
Laser motor
0-9 stop - (slow to fast) , 10 255
4
Master dimmer
Linear dimming (low to high)
5
Strobe effect
0-9 stop, 10-255 strobe (slow to fast)


Product specificaties

Merk: QTX
Categorie: Verlichting
Model: Pentaflash

Heb je hulp nodig?

Als je hulp nodig hebt met QTX Pentaflash stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verlichting QTX

QTX

QTX Wash & Beam Handleiding

4 September 2023
QTX

QTX TetraCube Handleiding

4 September 2023
QTX

QTX BATPAR-18W Handleiding

4 September 2023
QTX

QTX TinyMover Handleiding

4 September 2023
QTX

QTX Recharge DJ Handleiding

4 September 2023
QTX

QTX Multi-Bar Handleiding

4 September 2023
QTX

QTX SpectraWash Handleiding

4 September 2023
QTX

QTX DP4 Handleiding

20 Juni 2023
QTX

QTX MBM-1 Handleiding

18 Juni 2023

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting