QTX MHS-40K Handleiding

QTX Verlichting MHS-40K

Lees hieronder de 📖 handleiding in het Nederlandse voor QTX MHS-40K (5 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/5
www.avsl.com 0.4 UK User Manu 15 69 al
M - HS 40K
40W Kaleidoscope Beam LED
Moving Head
Item ref: 0.4 15 69UK
User Manual
A smart, compact moving head comprising a single powerful 30W white LED and RGBW colour wheel to
provide bright colourful effects, spots and washes. This model also features an unusual separate LED
colour ring around the main lens made up of 8 Bright SMDs which work in tandem with the main features.
The MHS-40K can be operated on auto, sound-to-light or DMX modes and can be free standing or
mounted to trussing using the supplied fixing bracket.
In the box:
Your MHS-40K should arrive with you in a single carton in good condition. T carton should contain he
1 x main unit with bracket, 1 x UK IEC mains lead and 1 x manual.
Warning:
To prevent risk of fire or electric shock, do not expo the unit to rain or damp environments. In the event se
of a spillage, disconnect the mains and al w the unit to dry out naturally. Qualified personnel should then lo
check the unit before continuing use.
Please read rough this ma thoroughly before use, any dama th nual ge
cause by misuse of product will not be covered by warrantd y.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 0.4 UK User Manual 15 69
Placement:
• Use the included mounting bracket to fix to a stand or lighting truss.
• Use secondary safety fixings if mounting overhead.
• Keep away from damp or dusty environments.
• Ensure adequate airflow around the fixture housings.
• Ensure ade ate access to ntrols and connections. qu co
• Do not aim LED output directly into line of sight, as this can result in eye injury.
Cleaning:
• Use a soft cloth with a neutral detergent to clean the casing as required.
• Use a vacuum cleaner to clear venti tion grilles of any dust or debris build-ups. la
• Do not use strong solvents for cleaning the unit.
Rear panel and control
1. Menu button
2. Up button
3. Down button
4. LED display
5. Enter button
6. Microphone
7. DMX input
8. DMX output
9. IEC input (110-240 Vac, 50/60
Hz)
1.
2.
3.
4.
5.
6.
7.
8.
9.
www.avsl.com 0.4 UK User Manual 15 69
Manual control menu:
Press the “ ” buttoMENU n to enter the settings menu.
Press “ ” and “UP DOWN” buttons to navigate through various setting functions.
Press button confirm the desired setting. “ENTER” to
Menu
Function
Description
Addr
A001 - A512
DMX addr settings ess
Chnd
18CH/32CH
DMX channel select
Slnd
Mast/Sl1
Master or slave select
Sl2/d512
Slave to DMX mode 2
Shnd
S - Sh5 h1
Sound active modes (Sh5 is 180° forward lock function)
Sens
0 100-
Sound active mode sensitivity low to high –
Auto
Aut1-Aut5
Auto mode select (Aut5 is 180° forward lock function)
SP1 - SP9
Auto mode speed adjust slow to fast –
Led
On/Off
LED display backlight
disp
psid
Reverse display mode
pan
Yes/No
PAN reverse mode
tilt
Yes/No
Tilt reverse mode
ver
Vxx
Version numb er
rset
Yes/ No
Factory reset
DMX mode:
The MHS- can be cont ll by DMX signal, simply connect the DMX signal source the DMX input on 40K ro ed to
the unit a balanced XLR lead. Extra fixtures can be controlled by the same DMX signa by looping vi a l
through e DMX out on the To enter DMX mode, select A001 from the u and co m the correct th unit. men nfir
start address using the and by “ ”UP “DOWN ENTER” “ buttons and ”. The A on the LED display will begin
to flash once it s received the DMX signal from the controller. This unit has 18 or 34 DMX channels as ’
indicated in the table below:
18 Channel:
Function
DMX value and description
PAN
0-255 PAN adjust 0- 540°
PAN fine
0-255 PAN fine adjust
Tilt
0- Tilt adjust 0- 255 270°
Tilt fine
0-2 Tilt fine adju 55 st
XY Speed
0-007 Fast to slow
Master dimmer
0- - 255 (0 100%)
RGBW strobe
000 008 - No strobe, 009-251 Strobe (slow to fast), 252-255 No
strobe
Red pattern
0-255 (0- ) 100%
Green pattern
0-255 (0- 100%)
Blue pattern
0-255 (0- 100%)
White Pattern
0-255 (0- 100%)
Pattern rotation
0-255 Forward (slow to fast), Backward (slow to fast)
Wash
0- - 255 (0 100%)
5050 Strobe
000-008 No strobe, 009-251 Slow to fast, 252-255 No strobe
Blank
No Function
5050 Chase
000-127 Colour, 128-255 Colour chase

Product specificaties

Merk: QTX
Categorie: Verlichting
Model: MHS-40K

Heb je hulp nodig?

Als je hulp nodig hebt met QTX MHS-40K stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Verlichting QTX

QTX

QTX Recharge Performer Handleiding

4 September 2023
QTX

QTX Wash & Beam Handleiding

4 September 2023
QTX

QTX TetraCube Handleiding

4 September 2023
QTX

QTX BATPAR-18W Handleiding

4 September 2023
QTX

QTX TinyMover Handleiding

4 September 2023
QTX

QTX Recharge DJ Handleiding

4 September 2023
QTX

QTX Multi-Bar Handleiding

4 September 2023
QTX

QTX SpectraWash Handleiding

4 September 2023
QTX

QTX DP4 Handleiding

20 Juni 2023
QTX

QTX MBM-1 Handleiding

18 Juni 2023

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Lucide

Lucide Vinti 02400/30/17 Handleiding

22 November 2024
Lucide

Lucide Vinti 02402/40/17 Handleiding

22 November 2024
Lucide

Lucide Vinti 02403/45/30 Handleiding

22 November 2024
Lucide

Lucide Orrin 02404/02/30 Handleiding

22 November 2024
Lucide

Lucide Orrin 02504/01/30 Handleiding

22 November 2024
Lucide

Lucide Gringo 03315/40/30 Handleiding

22 November 2024
Lucide

Lucide Eternal 03414/40/30 Handleiding

22 November 2024
Lucide

Lucide Eternal 03414/40/68 Handleiding

22 November 2024
Lucide

Lucide Tubi 03508/01/31 Handleiding

22 November 2024
Lucide

Lucide Tubi 03508/01/41 Handleiding

22 November 2024