QTX HZ-800 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor QTX HZ-800 (4 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
www.avsl.com 160.498UK Manual
HZ-800
HAZE MACHINE
Order ref: 160.4 UK 98
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
The HZ-800 is a high efficiency 800W haze machine capable of producing 12,000 cu.ft per
minute of haze to rapidly fill venues. The volume and speed of fill can be easily controlled
using the included wired controller with LCD panel or keyfob-style RF wireless remote. For
automated operation, a 2 channel DMX connection is also available. The fluid bottle can be
removed for easy refilling and there is a slot window to indicate the current fluid level.
800W Haze Vaporiser
Haze output ~12,000 cu.ft/min
Wired Controller with button control and LCD display
433Mhz keyfob-style RF wireless remote
2-Channel DMX connections
Removable fluid tank
I the box: n
Please check the contents to ensure that the product has been received in good condition.
HZ-800 Haze Machine
Wired Controller
RF Remote Control
UK Mains Lead
User Guide
If you find any accessory is missing or the machine has arrived with damage, please contact
your local dealer at once. Do not try to fix this item yourself or you will invalidate the
warranty. Please keep the original packaging and invoice for any possible replacement or
return demands.
Warnings:
1. To prevent risk of fire or electric shock, do not expose electrical parts to rain or
moisture.
www.avsl.com 160.498UK Manual
2. If liquids are spilled on areas other than inside the fluid tank, disconnect the mains,
allow the unit to dry out and have it checked by qualified personnel before further
use.
3. Avoid any impact, dropping or extreme pressure to the housing .
4. No user serviceable parts inside - do not open the case.
5. Allow the unit to acclimatise to room temperature before operating.
6. 800 The -HZ has a bui -in fluid container and should be operated in an upright lt
position. Ensure that the unit is positioned on a stable, non-slip surface.
Safety and Cleaning:
1. Check for correct mains voltage and condition of IEC lead before connecting to mains.
2. This unit must be earthed.
3. This unit uses a heating element be aware that parts of the housing may be hot
during use!
4. Use a soft dry or slightly damp cloth to clean the casing.
5. Do not use strong solvents for cleaning the housing.
6. Clean the haze mechanism periodically by operating with distilled water instead of
haze.
7. It is also recommended to use fog machine cleaning fluid (160.670UK) periodically.
Recommended Fluids:
For the - haze machine, we strongly recommend the following fluid which has been HZ 800
specifically formulated to perform best with any heater-based haze machines.
QTX ref code
Description
Size
160.591UK
High quality professional haze fluid
5 Litre
160.596UK
Eco haze fluid
5 Litre
R Panel: ear
www.avsl.com 160.498UK Manual
Setting U p:
1. 800 Unpack the HZ- unit.
2. Unscrew the top cap of the tank and remove to fill with haze fluid.
3. Replace the bottle and screw the cap securely, making sure that the pipe is fed down
to the bottom of the bottle to ensure a consistent flow of fluid.
4. Connect the wired remote controller to the sock on the rear panel. et
5. If DMX is to be used for control, connect the DMX signal from the controller to the
DMX IN XLR connector. Any further DMX controlled units may be connected via the
DMX OUT XLR connector.
6. Connect the IEC mains plug and power the unit on.
7. The it will begin the warming up process and the display panel on the wired remote un
will display which normally takes around 3-5 minutes. “ ”Warm up
8. Once the unit is warm enough for use the display panel will change to . “ ”Ready
Operation:
Use the control buttons on the panel of the wired controller to operate the unit s modes and
functions quickly and efficiently as below:
Button
Response
Function
Scrolls between DMX, Pump, Wind, Interval and
Duration modes
Up
Increase function or setting
Down
Decrease function or setting
Timer
Enter timer mode
Start/Stop
Turn pump on/off
Manual
Manually adjusts the fan speed
The LCD panel on the wired controller will display the following outputs:
Function
Display
Warm up sta te
Warm up or Ready
DMX address co de
1- 512
Pump settings
Pump
Fan settings
Wind
Time setting
Interval
Contin us smoke time setting uo
Duration
The small RF remote control supplied can also be used when wireless control of the unit is
needed. Its possible to increase and decrease the values of the pump (button A) and wind
(button B) settings using the remote control. As the receiver for the RF remote is fitted inside
the wired controller this must be connected and switched on for it to function correctly.


Product specificaties

Merk: QTX
Categorie: Effect machine
Model: HZ-800

Heb je hulp nodig?

Als je hulp nodig hebt met QTX HZ-800 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Effect machine QTX

Handleiding Effect machine

Nieuwste handleidingen voor Effect machine