QTX Derby 9 Handleiding

QTX Verlichting Derby 9

Lees hieronder de πŸ“– handleiding in het Nederlandse voor QTX Derby 9 (4 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
www.avsl.com 151.605UK User Manual
Derby 9
LED Light Effect
Item ref: 1.15 605UK
User Manual
Thank you for choosing the Derby 9 a classic multi-colour derby effect with multiple beams twisting in formation. Nine ,
different coloured 3 Watt LEDs deliver vivid coloured patterns, split through precision optics for wide area coverage.
Control via DMX512 or infra-red remote control for auto program or sound activation offers versatile operation modes for
mobile discos, stage shows may form part of a larger lighting installation.
In the bo x:
Your Derby 9 should arrive with you in a single carton in good condition. T carton should contain he
1 x main unit with bracket, 1x remote control, 1 x UK IEC mains lead and 1 x manual.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event of a spillage,
disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then check the unit before
continuing use.
Please read through this manual thoroughly before use, any damage
Cause by misuse of product will be covered by warrantd not y.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 605UK User Manual 151.
Placement:
β€’ Use the included mounting bracket to fix to a stand or lighting truss
β€’ Use secondary safety fixings if mounting overhead
β€’ Keep away from damp or dusty environments
β€’ Ensure adequate air-flow around the fixture housings
β€’ Ensure adequate access to controls and connections
Cleaning:
β€’ Use a soft cloth with a neutral detergent to clean the casing as required
β€’ Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
β€’ Do not use strong solvents for cleaning the unit
Rear panel controls:
1. LCD display
2. Manual control buttons
3. Microphone
4. DMX input
5. DMX output
6. IEC mains socket
Manual control menu:
Press the β€œMENU” button to enter the settings menu.
P buttons navigate through various setting functio ress β€œ ” and β€œ ”UP DOWN to ns.
P on to save the desired setting.ress β€œ ”ENTER butt
Mode
Function
Motor Speed
Control Effects
A1
Red + blue + warm white /motor speed from slow to fast –ON
A2
Amber + cool white + yellow /motor speed from slow to fast –ON
A3
Green + purple + UV /motor speed fr slow to fast –ON om
A4
Auto
1 to 9
9 Colour jump change/motor speed from slow to fast
A5
3 Colour jump change/motor speed from slow to fast
A6
Gradual change 1/motor speed from slow to fast/with no strobe effects
A7
Gradual change 2/motor speed from ow to fast/inc. strobe effects sl
S1
Sound
0 to 20
Sound mode/colour change/including strobe effects/light on/black out
S2
Sound mode/colour change/motor speed from fast to slow
SA
1 to 10
Sound mode
1.
4.
5.
6.
www.avsl.com 605UK User Manual 151.
S3
1 to 20
Sound mo de
FL
1 to 9
Strobe mode
SLAU
---
Slave mode
A001
001 to 512
DMX control
Remote control:
The Derby 9 is supplied with an I.R. remote control for quick access to most of the basic functions of the unit This must .
be aimed at the front of the unit where there is a remote receiver an has a maximum range of approximately 4m. d
Controls are listed on the layout drawing low. be
DMX mode:
The Derby 9 can be controll by DMX signal, simply connect the DMX sig l source to the DMX input on e unit via ed na th a
balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit.
To enter DMX mode, select A from the menu and co m the correct start address using the and 001 nfir by β€œ ”UP β€œ ”DOWN
buttons and to confirm β€œ ”ENTER .
This unit has 7 DMX channels as indicated in the table below:
Channel
Function
DMX
Description
CH1
Master dimmer
0-7
Blackout
8- 255
0-100% linear dimmer
CH2
Red/blue/warm
0-7
Blackout
white group
8- 255
0-100% linear dimmer
CH3
Amber/yellow
0-7
Blackout
Cool white group
8- 255
0- linear dimmer 100%
CH4
Green/purple
0-7
Blackout
UV group
8- 255
0-100% linear dimmer
CH5
Strobe
0- 10
No strobe
11 255-
Strobe ( different speeds) 6
0-5
Motor stop
CH6
Motor
6- 127
Static position
128 255-
Oscillation (9 different speeds)
0-9
Manual channels 1-6 available
CH7
Choose program
10 39-
A1 - red/blue/warm white - /motor speed ON
from slow to fast
40 69-
A2 - amber/cool white/yellow - /motor speed ON
from slow to fast
1. Main unit on/off
2. Motor on/off
3. Sound show mode 1
4. Strobe on/off
5. Red/blue/warm white colour group
6. 9 Colour jump change
7. Gradual change 2
8. DMX on/off
9. Sound show mode 2
10. Sound show mode 3
11. Orange/white/yellow colour gr oup
12. Green/purple/UV colour group
13. 3 Colour jump change
14. Gradual change 1
15. +/- Increase/decrease spe ed
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.


Product specificaties

Merk: QTX
Categorie: Verlichting
Model: Derby 9

Heb je hulp nodig?

Als je hulp nodig hebt met QTX Derby 9 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verlichting QTX

QTX

QTX Wash & Beam Handleiding

4 September 2023
QTX

QTX TetraCube Handleiding

4 September 2023
QTX

QTX BATPAR-18W Handleiding

4 September 2023
QTX

QTX TinyMover Handleiding

4 September 2023
QTX

QTX Recharge DJ Handleiding

4 September 2023
QTX

QTX Multi-Bar Handleiding

4 September 2023
QTX

QTX SpectraWash Handleiding

4 September 2023
QTX

QTX DP4 Handleiding

20 Juni 2023
QTX

QTX MBM-1 Handleiding

18 Juni 2023

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting