QSC DCM-2 Handleiding

QSC Niet gecategoriseerd DCM-2

Lees hieronder de 📖 handleiding in het Nederlandse voor QSC DCM-2 (36 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/36

DCM Series

*TD-000106-00*

TD-000106-00 Rev.B

Digital Cinema Monitor & Crossover System

USER MANUAL

DCM-1

DCM-2

DCM-3

QSC® is a registered trademark of QSC Audio Products, Inc.

“QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office

IMPORTANT SAFETY INSTRUCTIONS

& EXPLANATION OF SYMBOLS

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert

the user to the presence of uninsulated dangerous voltage within the product s enclosure’

that may be of sufficient magnitude to constitute a risk of electric shock to humans.

The exclamation point within an equilateral triangle is intended to alert the user to the pres-

ence of important operating and maintenance (servicing) instructions in this manual.

1 Read these instructions..

2 Keep these instructions..

3 Heed all warnings..

4 Follow all instructions..

5 Do not use this apparatus near wate ..r

6 Clean only with a dry cloth..

7 Do not block any ventilation openings. Install in accordance with QSC Audio Product s instructions..’

8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including.

amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one.

blade wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the

third prong is provided for your safety. If the provided plug does not fit your outlet, consult an electrician for the

replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the.

point where they exit the apparatus.

11 Only use attachments/accessories from QSC Audio Products, Inc..

12 Use only with carts, stands, tripods, brackets, interconnecting cables, or software specified by QSC Audio.

Products. When moving or transporting using a cart, use caution to avoid injury from tip ove .apparatus it ping r

13 Unplug the apparatus during lightning storms or when unused for long periods of time..

14 Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any wa ,.y

such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normall , or has been dropped.y

15 When installing equipment into a rack, distribute the evenl. weight y to minimize the risk of it tipping over or

collapsing.

16 Connect the unit only to a properly rated supply circuit.. AC

17 rack-mounted equipment ed.. Make sure all is well grounded/earth

18 Maximum operating ambient temperature is 50°C..

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: To reduce the risk of electric shock, do not

remove the cover. No user-serviceable parts inside.

Refer servicing to qualified service personnel.

WARNING: To prevent fire or electric shock, do not

expose this equipment to rain or moisture.

FEDERAL COMMUNICATIONS COMMISSION (FCC) INFORMATION

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference

at his or her own expense.

The DCM hardware unit and DCM Manager software are the property of QSC Audio Inc. Information in this document is subject to change without notice and does

not represent a commitment on the part of QSC Audio. The software described here is furnished under a licensing agreement. It is against the law to copy the

software on any medium except as specifically allowed in the licensing agreement. DCM Manager is a trademark of QSC Audio Products, Inc; Windows and Windows

98, NT, XP and 2000 are trademarks of Microsoft Corporation; IBM is a registered trademark of IBM Corporation; Pentium is a registered trademark of Intel