QSC AcousticCoverage AC-C4T-nb Handleiding

QSC Niet gecategoriseerd AcousticCoverage AC-C4T-nb

Lees hieronder de 📖 handleiding in het Nederlandse voor QSC AcousticCoverage AC-C4T-nb (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
AcousticCoverage (AC)
User Manual
Model: AC-C4T-nb & AC-C8T-nb
TD-000519-00-A
TD-000519-00-A
EXPLANATION OF SYMBOLS
The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.
The term indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result “CAUTION!”
in damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of theprocedure.
The term “NOTE” is used to indicate additional useful information.
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated “dangerous
voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.
The intent of the exclamation point within a triangle is to alert the user to the presence of important safety, and operating and
maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.
Only use attachments/accessories specied by the manufacturer.
Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply
cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Do not use this apparatus in or near water or liquids.
Do not submerge the apparatus in water or liquids.
Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.
Do not block any ventilation opening. Install in accordance with the manufacturer’s instructions.
Keep ventilation opening free of dust or other matter.
Adhere to all applicable, local codes.
Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
Maintenance and Repair
Advance technology, e.g., the use of modern materials and powerful electronics, requires specially adapted maintenance and repair methods. To
avoid a danger of subsequent damage to the apparatus, injuries to persons and/or the creation of additional safety hazards, all maintenance or
repair work on the apparatus should be performed only by a QSC authorized service station or an authorized QSC International Distributor. QSC is
not responsible for any injury, harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those
repairs.
Warranty
For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com
Para una copia de la Garantía Limitada de QSC, visite el sitio web de QSC, en www.qsc.com
Pour obtenir une copie de la garantie limitée de QSC, visitez le site de QSC à www.qsc.com
Besuchen Sie die Webseite von QSC (www.qsc.com) um eine Kopie der beschräenkte Garantie von QSC zu erhalten.
如果您想要 有限保修的複印本,请造访 音频产品的网站QSC QSC www.qsc.com
Mount the Loudspeaker
Refer to .Figure 2
1. Make sure all of the dog-ears are fully extended and in their non-capture position.
2. Position the loudspeaker into the hole prepared in the ceiling.
3. Use a Phillips screwdriver to tighten each of the four dog-ear screws. As you tighten the
screws, the dog-ears will swing into capture position over the ceiling. Be sure all dog-ears
are properly positioned over the ceiling.
4. Tighten the dog-ears until firm contact is made with the ceiling surface.
CAUTION!:
Do not overtighten the dog-ear screws!
5. Install the loudspeaker grill.
Prepare Ceiling
1. Use the template provided to mark and cut a hole in the ceiling where the loudspeaker is
to be installed.
Wire the Loudspeakers
Refer to Figure 1.
1. On the loudspeaker transformer, identify the common (black) and the appropriate color
coded wire for the desired wattage tap.
2. Trim the ends of the non used color coded tap wires to ensure no bare ends come into
contact with other tap wires or metal surfaces.
3. Using wire nuts or crimps, attach the speaker supply wire negative to the common (black)
lead of the transformer. Attach the speaker supply wire positive to the selected color
coded transformer lead.
WARNING!:
Do not attach more than one color coded transformer tap
lead. This may result in transformer saturation and possibly damage the
loudspeaker.
- Figure 1. -
- Figure 2. -
Dog-ears against loudspeaker
1
Turn the screw clockwise to engage the
dog-ear with the ceiling.
2


Product specificaties

Merk: QSC
Categorie: Niet gecategoriseerd
Model: AcousticCoverage AC-C4T-nb

Heb je hulp nodig?

Als je hulp nodig hebt met QSC AcousticCoverage AC-C4T-nb stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd QSC

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd