Pyle PVTTBT6 Handleiding

Pyle Platenspeler PVTTBT6

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PVTTBT6 (8 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Model : PVTTBT6

Retro Belt-Drive Bluetooth Turntable with USB- -to PC Connection

TURNTABLE PARTS

1. 45 ARPM daptor

2. Lift L ever

3. Speed C S ontrol election

4. Function Selection Knob

5. Tone(Needle) arm

6. Auto & Manual Stop Control

7. Tone Arm Rest

8. Power/Volume Control Knob

9. Charging Led Indicator

10. Power Led Indicator

11. BT Led Indicator

12. Platter/Turntable

13. Stylus(Needle) Cartridge

14. Built-in Speaker

15. Power Adaptor Jack

16. USB Jack to PC for recording

17. RCA Output

18. 3.5mm Line- in Jack

POWER ON THE UNIT

Connect the power adaptor to an electrical outlet (120V-60Hz); Or make sure the rechargeable

battery has been fully d. charge Then, turn the Power/Volume Control knob clockwise to switch

on the unit. The Power led light indicator will light up.

PLAY A RECORD

1. Open the suitcase

2. Turn the function selection knob (4) to Phono mode

3. Place a record on the turntable (13) and set the player speed (3) to match the record speed

(33/45/78). NOTE: when playing a single (a 45 rpm record) and/or records with large center

holes, use the 45 rpm adaptor . (1)

4. Remove the tone arm (5) from the rest position (7), push lift lever (2) backward to raise the

tone arm and gently move the tone arm to the desired position over the record. The

turntable will begin to spin, move the tone arm slowly onto the desired position on the

record to begin playing the record.

5. If the Manual & Auto Stop control ( switch 6) is in ON position, record will stop automatically

when finished. If this switch is in OFF position, record will not stop automatically when

finished.

6. For best performance and product maintenance, unplug the turntable when not in use.

PLAY BLUETOOTH

7. Turn the function selection knob (4) to BT mode. The BT light indicator will flash with

Blue/Red led light.

8. Open the BT audio source and connect with “Speaker”. Once connected, the BT light

indicator will flash only in blue color.

9. You can control the BT audio source to select songs and volume for playback.

LINE IN

10. Turn the function selection knob (4) to LINE IN mode. Connect the 3.5mm line-in jack (18)

which is located at the rear of the unit with a line in cable (not included)- . Plug the other end

of the ca into theble . audio source

11. Control the Line in audio source to select songs and volume for playback.-

Product specificaties

Merk:	Pyle
Categorie:	Platenspeler
Model:	PVTTBT6
Kleur van het product:	Oranje
Gewicht:	3833 g
Soort:	Draaitafel met riemaandrijving
Aantal USB-aansluitingen:	1
USB-versie:	2.0
AUX ingang:	Ja
Nominale snelheid:	33,45,78 RPM
Productafmetingen (B x H x D):	355.59 x 274.32 x 132.07 mm
Cd-speler:	Nee
Line outputs (RCA):	2