Pyle PT649D Handleiding

Pyle Cassettespeler PT649D

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PT649D (4 pagina's) in de categorie Cassettespeler. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

- 1 -

PANEL INFORMATION

LEVEL METER INDICATION

DECK B COUNTER

PLAY

FWD FWD

DYNAMIC NOISE REDUCTION

FULL AUTO STOP SYSTEM

NOISE REDUCTION

OFF ON

MIN MAX

REC LEVEL

REC/PLAY

HIGH SPEED DUBBING

FULL AUTO STOP SYSTEM

POWER

ON OFF

PLAY REW FF STOP/EJ. PAUS E REC PLAY REW FF STOP/EJ. PAUSE

PLAY CrO2 DUBBING HI.SP.DUB. REC CrO2

1 3 4 5 6 2

7 9 8 711 10

1. ON/STANDBY SWITCH

Depress button to switch “ON” the unit. Press release to switch “OFF” unit into “STANDBY MODE”. If the unit is left

unattended for long periods, remove the 13 AMP plug from the power socket.

2. CASSETTE HOLDER

3. DYNAMIC NOISE REDUCTION

Switch on Dynamic NR key for better result when tapes with Dynamic Noise reduced are playing.

4. PEAK LEVEL INDICATOR

These indicate the recording level during recording and output level during playback. The LED indication varies with

the signal strength during recording and playing.

* REC

This lights when Deck B is in the recording the record-pause mode.

* HIGH SPEED

This lights when in the high-speed dubbing.

* PLAY Cr02/METAL

This lights when the Cr02/metal function is operated.

* ERC Cr02

This lights when Cr02 function is operated.

5. TAPE COUNTER and RESET button ( DECK B)

When recording or playing, you can use the tape counter to count the tape length.

6. REC LEVEL SWITCH

Adjust the record level.

7. CASSETTE OPERATION BUTTONS

● (REC)

► (play):

Press to play the tape.

◄◄ (rewind)

Press to rewind the tape.

►► (fast forward)

Press to fast forward the tape.

(stop/eject)

Press to stop the tape. Pressing this button after the tape stops to open the cassette holder. (The tape automatically stops

when it reaches the end.)

I I (pause)

Press to temporarily stop the tape in the record or playback mode. Press it again to release the pause mode and restart

the tape.

8. REC Cr02 SWITCH

For recording with Cr02 tape.

9. HIGH SPEED DUBBING SWITCH

When you need high dubbing, press this switch and the relative light will be lit.

10. DUBBING SWITCH

Press the DUBBING button when you need Dubbing at normal speed.

11. PLAY Cr02 SWITCH

When play Cro2 tape, press this button.

- 2 -

OPERATING PROCEDURES

EQ TAP E TU NER

T U NE R CD AU X P L AY REC

TAP E

PL AY REC

R EM O T E S YS TE M

AUD IO

R IGH T L E FT

AV1 AV2

INTEG RATE D CIRC UIT

AC 2 20 V - 23 0V ~ 50 Hz

LINE

(IN)RE C PLAY(O UT)

REMOTE SYSTEM

TO AMP

VO LTA GE S EL ECT OR

2 20 ~ 2 30 V

5 0 Hz

1 10 ~ 1 20 V

6 0 Hz

RI SK OF ELECTRI C SHO CK

DO NOT OPEN

CASSETTE DECK

INTEGRATED CIRCUIT

110~120V

60Hz 50Hz

220~230V

VOLTAGE SELECTOR

VOLTAGE SELE CTOR

Use thi s switch to selec t the

pr oper Volt age fo r your region

Playback a recorded tape ( DECK A or DECK B)

1. Switch on the power of the unit.

2. Press the STOP/EJECT button and insert a recorded

cassette. For Cr02/metal tape, further press the

Cr02/metal switch and the light at the indicator will be

lit up.

3. Press the PLAY button.

4. Adjust the AMPLIFIER VOLUME and GRAPHIC

EQUALIZER controls for your desired sound level

and taste.

5. Press the STOP/EJECT button to stop playback at any

time.

Fast forward and rewind (DECK A or DECK B)

For fast winding or rewinding the tape, press the FFWD or

REW button. Press the STOP/EJECT button when the

desired location has been reached. When the end of the

tape has been reached, the FFWD or REW button will be

released automatically.

Pause (DECK A or DECK B)

Press the PAUSE button to momentarily stop tape travel

during playback or recording. Re-press the button for

pause release and playback or recording to re-start.

Full automatic stop (DECK A or DECK B)

Press the STOP/EJECT button to stop playback or

recording at any time. When the end of the tape has been

reached, any of the PLAY, REC, REW or FFWD buttons, if

pressed, will be automatically released and the head block

completely separates from the tape and capstan. This

protects tape and prevents pinch roller wearing out.

RECORDING (DECK B)

When recording, use the DECK B.

Manually level control recording (for external source)

This unit has record level volume to adjust the record level.

Usually, the volume has a center click. When it reached the

center click position, the tapes can be recorded normally. If

the sound source signal is too strong, a red spot will be

appeared in the record level indicator. You can adjust the

record level volume to the left position and vice versa.

In normal state, the sound source level is between the red

and green spots ( that’s 0dB).

1. Press the TOP/EJECT BUTTON and insert a cassette.

2. When Cr02 tape is used for recording, press the REC

Cr02 switch.

3. Press the record button. The level meter at the peak

level indicator will shift and the REC light will be lit

up indicating that recording is underway.

4. Press the STOP/EJECT button to stop recording at any

time.

Pause

Press this button to momentarily stop tape travel during

recording. Re-press this button for pause release and

recording restart.

Dubbing operation (DECK A→ DECK B)

This unit enables you to dub a recorded tape to another

tape by using the built-in double deck mechanisms. It is

performed only one way from DECK A to DECK B.

Preparation

1. Insert a cassette for playback in DECK A.

2. Select tape DIRECTION button (FFWD or REW ) for

the desired location of the tape to the beginning.

3. Insert a cassette into DECK B.

4. Select the dubbing speed by the dubbing High speed

switch.

5. There are two dubbing speeds: high speed and normal

speed.

6. For high speed dubbing, press the High speed switch.

The light at the indicator will be lit up and high speed

dubbing is then activated.

7. Normal speed dubbing requires no pressing of the

High Speed Switch. No light will be shown at the

indicator at all.

8. Press the PAUSE button of DECK A.

9. Then press the PLAY button of DECK A.

10. Press the RECORD button of DECK B.

11. Press the PAUSE again of DECK A to release the

pause mode. The unit will start the synchronized

dubbing operation.

12. To stop dubbing operation, press the STOP/EJECT

button of DECK B.

Note: Do not change dubbing speed during dubbing

operation.

Product specificaties

Merk:	Pyle
Categorie:	Cassettespeler
Model:	PT649D
Kleur van het product:	Zwart
Gewicht:	4000 g
Breedte:	360 mm
Diepte:	246 mm
Hoogte:	128 mm
Ingangsspanning:	110/240 V
Frequentie:	50/60 Hz
Frequentiebereik:	40 - 14000 Hz
Audio-opname-instellingen:	Normal, High Speed
Aantal kanalen:	2 kanalen
Type beeldscherm:	VFD
Aantal decks:	2 deck(s)
Autostop:	Ja