PulseAudio PAEXARC1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor PulseAudio PAEXARC1 (8 pagina's) in de categorie Audio/video-converter. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
PAEXARC1
For applications where ARC signals need to be extended above
HDMI cabling limitations to an amplier or distributed audio system.
Updated: May 2023
ARC DIGITAL
AUDIO EXTENDER
SAFETY INSTRUCTIONS
For optimum performance and safety, please read these instructions carefully before
use. Please keep this manual for future reference.
To prevent electric shock, please ensure that all apparatus is properly grounded.
Place the device in a well-ventilated area, do not block any ventilation openings.
Do not expose this apparatus to rain or place it near water. Any liquid that goes
into the apparatus may cause a failure, re, or electric shock.
Do not place the device on an uneven or unstable surface. The device may fall
resulting in a malfunction.
Never insert anything metallic into the open parts of this apparatus. This may
cause a danger of electric shock.
If a third-party power supply is used, please ensure that the power supply
specications meet the product requirements.
INTRODUCTION
The PulseAudio PAEXARC1 is an ARC Digital Audio Extender that allows digital audio to
be routed from a display, back to a remote location or amplier, over a single Cat5e/6
cable up to 492ft (150m). For displays without ARC capability, or when ARC settings are
not working as they should, the built-in “ARC Backup Plan” is featured where audio can
still be extended utilizing SPDIF. For applications where ARC signals need to be extended
above HDMI cabling limitations to an amplier or distributed audio system, the
PAEXARC1 is the perfect solution.
The range of the PAXEARC1 will vary depending on the HDMI/ARC sample rates.
For instance, higher sample rates, 192kHz, will be rated at 295ft (90m), while lower
sample rates, 96kHz, will be rated at 492ft (150m).
Product Features
Extends ARC Digital Audio signals over Cat5e/6
Supports a single HDMI ARC input and output
Extends digital audio signals up to 492ft (150m) at 96kHz
or 295ft (90m) at 192kHz over a single Cat5e/6
Built-in “ARC Backup Plan” with SPDIF input and output
Supports Dolby / DTS 5.1CH and PCM 2CH audio formats
CEC pass-through when HDMI®
ARC mode is enabled
Dimensions: 3.5” x 2.8” x 0.8” (90mm x 72mm x 20mm)
Weight: 6.2oz (175g)
Package Contents
(1) Digital audio extender set - TX and RX (2) USB-A to micro-USB cables
(2) 5V 2A USB power sdapters (1) Product manual
SPECIFICATIONS
Audio
Supported Audio Formats PCM 2CH, Dolby/DTS 5.1CH
Sample Rates
Optical / ARC (492ft / 150m)
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz
ARC (295ft / 90m) 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Connections
Transmitter
Input: (1) SPDIF, (1) ARC HDMI® In, (1) Micro-USB (Power)
Output: (1) CAT Out (Cat5e/6)
Receiver
Input: (1) CAT In (Cat5e/6), (1) Micro-USB (Power)
Output: (1) SPDIF Out, (1) ARC HDMI® Out
Technical & Mechanical
Housing Metal
Color Black
Dimensions 3.5” x 2.8” x 0.8” (90mm x 72mm x 20mm)
Weight 6.2oz / 175g
Power
Power Consumption
Transmitter: .35W
Receiver: .7W
ESD
Human-body Model: ±8kV (Air-gap discharge)
±4kV (Contact discharge)
Operating Environment
Temperature
Working: 0°C to 40°C / 32°F to 104°F
Storage: -20 to 60°C / -4°F to 140°F
Relative Humidity 20 to 90% RH (Non-condensing)


Product specificaties

Merk: PulseAudio
Categorie: Audio/video-converter
Model: PAEXARC1

Heb je hulp nodig?

Als je hulp nodig hebt met PulseAudio PAEXARC1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Audio/video-converter PulseAudio

Handleiding Audio/video-converter

Nieuwste handleidingen voor Audio/video-converter