Pulse ShowerSpas 1022 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Pulse ShowerSpas 1022 (4 pagina's) in de categorie Douchekop. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
8
Manufacturer’s Limited Warranty
PULSE Shower Spas, Inc. warrants that all ShowerSpas are free from defect in
workmanship and/or materials for a period of three years from the date of purchase.
This warranty extends to the original purchaser only and is non-transferable.
This warranty does not cover, and PULSE Showerspas will not pay for conditions,
malfunctions or damages resulting from (1) normal wear and tear, improper
installation, whether performed by a contractor, service company or the consumer,
improper maintenance, misuse, abuse, negligence, accident or alteration; (2) the use
of abrasive and/or caustic cleaning agents or “no-rinse” cleaning products or the use
of the product in any manner contrary to the product instruction; or (3) conditions in the
home such as excessive water pressure or corrosion.
Should any ShowerSpa be determined by PULSE Showerspas, Inc. to be defective
in normal residential use, at the option of PULSE Showerspas, Inc., such product
shall either be replaced or repaired and returned to the customer free of defects. The
consumer shall give notice of any defects to PULSE Showerspas, Inc. within thirty
days of discovery of such defect.
Proof of purchase (original sales receipt) must be provided to PULSE Shower Spas,
Inc. with all warranty claims. PULSE Shower Spas, Inc. is not responsible for labor
charges, removal charges, installation or other consequential costs. In no event shall
the liability of PULSE Showerspas, Inc. exceed the purchase price of the ShowerSpa.
Some states/provinces do not allow limitations of how long an implied warranty lasts or
the exclusion or limitation of such damages, so these limitations and exclusions may
not apply to you. This warranty gives the consumer speciîšżc legal rights. You may also
have other rights that vary from state/province to state/province.
Follow manufacturers recommended installation. Use caution with children under ten
years of age. Do not use ShowerSpa as a support device. Do not use harsh chemicals
or abrasives when cleaning. Turn water supply off when servicing ShowerSpa.
PULSE Showerspas, Inc. 49 Hangar Way Suite A Watsonville, CA 95076 888.785.7320   w   w   w
email:info@pulseshowerspas.com website: www.pulseshowerspas.com   w
Leilani ShowerSpa
Installation Instructions
Model #1022
2
SHOWERSPA ASSEMBLY
After unpacking your ShowerSpa, some assembly is required prior to installation.
Slide Bar assembly: Refer to exploded line drawing and actual photo for reference.
1. With slide bar (part#3) in hand, position bracket (part #5) with screw hole pointing
left. Push cap (part #6) into slide bar until securely in place.
2. Insert bracket (part #5) into top slot of slide bar making sure top and bottom bracket
face the same direction and secure the top slide bar cap into place.
3. Align the assembled slide bar with pre-drilled holes located on right side of unit and
secure with provided machine screws and washers.
After the unit is mounted to the wall:
1. Insert washer (part #14) into hexagon shaped end of hand shower hose (part #10)
and attach to threaded outlet on bottom of ShowerSpa. (do not over-tighten.)
2. Insert washer (part #14) into tapered end of hand shower hose and attach to hand
shower (part #7). Insert hand shower into holder on slide bar.
Note: To adjust angle of hand shower gently rotate toward you or toward the wall. For
vertical adjustment simply depress the button and slide holder up or down.
3. Insert black washer (part #13) in Shower head and screw shower head onto the
adjustable shower arm. Note : To re-position shower arm loosen wing nuts and
move to desired position then re-tighten wing nuts.
7
Leilani Model # 1022
PLEASE READ THE FOLLOWING INSTRUCTIONS
COMPLETELY BEFORE BEGINNING!
Our goal is to ensure your installation goes smoothly and safely. Please read these safety
instructions carefully and follow recommendations for plumbing and mounting. If, after reading
instruction manual, you determine you do not have the necessary skills and/or tools, we
then recommend a licensed plumbing contractor complete the installation.
If you encounter any problems during installation call Technical Support toll
free at 888-785-7320 before returning item to store.
You will need the following tools:
Level Tape Measure
Soft pencil or felt pen to mark tile Drill (Preferably cordless)
A Reciprocating Saw w/metal cutting blade (Sawzall®) Channel Locks or adjustable wrench
ÂĽ Masonry Drill Bit"
3. Remove handle(s) and trim cover(s) of your existing valve exposing valve body in wall.
4. Locate hot and cold supply lines entering valve. Using a reciprocating saw with sharp metal saw
blade, cut existing valve out, preserving threads of the supply lines entering valve. ( : you Note
should also cut the riser within wall supplying existing shower head.) Carefully twist and remove
valve.
5. Unscrew old shower head from arm and then unscrew arm.
6. It is recommended to extend water supply lines outside wall cavity parallel to îšżnished wall
surface. Attach a male threaded tting to each supply line, maintaining ¼"- ½" space between
male threaded îšżttings and îšżnished wall. The open end of male îšżtting should point downÂł.
7. Make certain location (height/width) of stub-outs and connecting to them does interfere with not
desired mounting height of ShowerSpa.
8. Mark location of holes for mounting bracket making sure bracket is level. For a person 5'8" – 6'2"
tall, we recommend 54½" from nished oor height�. Before drilling holes for bracket, make certain
ShowerSpa will rest at against nished wall surface at desired mounting height with supply lines
connected.
9. Drill ÂĽ" holes through wall surface using a masonry bit. Drill slowly through wall surface to avoid
cracking and chipping. Insert anchors and securely screw bracket to wall. Before connecting hot
and cold supply lines, mount ShowerSpa on wall, checking height, and making sure ShowerSpa
feels secure.
10. Connect hot and cold water supply lines to male threaded pipe, do not over-tighten. Before you
mount ShowerSpa, check îšżttings to make sure they are secure. Turn on water and check for
leaks. When îšżttings are leak-free mount ShowerSpa on wall.
11. : Seal around body of ShowerSpa with a bead of silicone. Optional DO NOT SEAL BOTTOM.
Âł Additional îšżttings may be necessary depending on your speciîšżc situation.
ďż˝ This height can vary depending on several factors (i.e. location of supply lines, old valve access
area, personal preference, etc.)
CARE AND MAINTENANCE
Always blot dry any water from the surface of your ShowerSpa. To help protect your
ShowerSpa from hard water stains and mineral deposits, use an auto spray wax periodically
and wipe down your ShowerSpa after each use. Allowing water to evaporate on the surface
can lead to a build up of mineral deposits. Cleaning with a damp, nonabrasive sponge and
drying with a clean soft cloth should help keep your ShowerSpa looking beautiful.
REMEMBER:
Never use abrasives or harsh cleaners!!! Soap and water does
the trick! To keep your ShowerSpa in pristine condition, dry
after each use.
54
Dimensions
Finished Floor
53½"
38"
12½"
2"
15½"
10"
8"
11" 2Âľ"
18½"
18"
54½"
Wall
Bracket
5'8"-6'2"
Mark bottom of
ShowerSpa
4"
37"
27"
17½"
54½"
7Âľ"


Product specificaties

Merk: Pulse ShowerSpas
Categorie: Douchekop
Model: 1022

Heb je hulp nodig?

Als je hulp nodig hebt met Pulse ShowerSpas 1022 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden