Proscan PSB379 Handleiding

Proscan Soundbar PSB379

Lees hieronder de 📖 handleiding in het Nederlandse voor Proscan PSB379 (32 pagina's) in de categorie Soundbar. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

INSTRUCTION MANUAL

MODEL:PSB379

PLEASE READ CAREFULLY BEFORE OPERATING

AND KEEP FOR FUTURE REFERENCE

39 INCHES BLUETOOTH SOUND BAR SPEAKER WITH WIRELESS SUBWOOFER

BT AUX IN 1 AUX IN 2 OPTICAL

AUX IN 1 POWER SOU RCE SCAN PAIR

POWER/FM

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, AND ANNOYING INTERFERENCE, USE THE

RECOMMENDED ACCESSORIES ONLY.

FCC NOTICE:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy

and, if not Installed and used in accordance with the

instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

receiver.

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV

technician for help.

FCC WARNING:

To assure continued compliance, follow the attached

installation instructions and use only shielded cables

when connecting to other devices. Modifications not

authorized by the manufacturer may void user`s authority

to operate this device.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

WARNING:

To reduce the risk of ﬁre or electric shock, do not expose

this apparatus to rain or moisture. The apparatus shall

not be exposed to dripping or splashing and that objects

ﬁlled with liquids, such as vases shall not be placed on

apparatus.

The lighting ﬂash with arrowhead symbol within an

equilateral triangle is intended to alert the user to

the presence of uninsulated “dangerous voltage

within the product’s enclosure that may be of

suﬃcient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

IMPORTANT SAFETY INSTRUCTION

Before using the unit be sure to read all operating instructions carefully Please note that these , .

are general precautions and may not pertain to your unit .

1 Read these instructions) .

.All the safety and operating instructions should be read before the product is operated

2 Keep these instructions) .

The safety .and operating instructions should be retained for future reference

3 Heed all warnings) .

.All warnings on the product and in the operating instructions should be adhered to

4 Follow all instructions) .

.All operating and use instructions should be followed

5 Do not use this apparatus near water) .

Do not , : , , use this product near water and moisture for example near a bathtub washbowl kitchen

; ; .sink or laundry tub in a wet basement or near a swimming pool

6 Clean only with dry cloth) .

. Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol

cleaners. .Use a dry cloth for cleaning

7 Do not block any ventilation openings Install in accordance with the manufacturer s) . '

.instructions

, Slots and openings in the cabinet and in the back or bottom are provided for ventilation to ensure

reliable operation of the product and to protect it from overheating. These openings must not be

. , ,blocked or covered The openings should never be blocked by placing the product on a bed sofa

. rug or other similar surface This product should never be placed near or over a radiator or heat

. source This product should not be placed in a built- in installation such as a bookcase or rack

' .unless proper ventilation is provided or the manufacturer s instructions have been adhered to

8 Do not install near any heat sources such as radiators heat registers stoves or other) , , ,

( ) .apparatus including amplifiers that produce heat

9 Do not defeat the safety) purpose of the polarized or grounding type plug A polarized plug - .

. has two blades with one wider than the other A grounding type plug has two blades and a

. . third grounding prong The wide blade or the third prong are provided for your safety If the

provided plug does not fit , into your outlet consult an electrician for replacement of the

.obsolete outlet

10 Protect the power cord from being walked on or pinched particularly at plugs convenience) ,

, .receptacles and the point where they exit from the apparatus

11) / .Only use attachments accessories specified by the manufacturer

12 Use only with) the cart stand tripod bracket or table specified by the manufacturer or sold , , , , ,

. , /with the apparatus When a cart is used use caution when moving the cart apparatus

- .combination to avoid injury from tip over

.An appliance and cart combination should be moved with care

, Quick stop excessive force and uneven surfaces may cause the

.appliance and cart combination to overturn

13 Unplug this apparatus during lightning storms or when unused for long periods of time) .

, To protect your product from a lightning storm or when it is left unattended and unused for long

, periods of time unplug it from . the wall outlet and disconnect the antenna or cable system This

- .will prevent damage to the product due to lightning and power line surges

14 Refer all servicing to qualified service personnel Servicing is required when the apparatus) .

, - has been damaged in any way such as power supply cord or plug is damaged liquid has ,

, been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain

, .or moisture does not operate normally or has been dropped

15 Power source)

This product should be operated only from the type of power source indicated on the marking label .

, If you are not sure of the type of power supply to your home consult your appliance dealer or local

. , , power company For products intended to operate from battery power or other source refer to the

.operation instructions

For example, this unit may not have the capability to be connected to an outdoor antenna.

IMPORTANT SAFETY INSTRUCTION

Ventilation

When placing the Sound Bar on an entertainment center, bookshelf, or any type of

enclosed space, be sure to allow space around the Sound Bar

oduce a potential heat hazard.

1. Placing the device on table

2.1 Mounting to the wooden wall

for ventilation.

If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from

the Sound Bar could pr

A. Mark the position of the mounting holes on the wall using a pencil.

B. Drill appropriate holes by powerful electric drill on wall.

C. Mounted the supplied Metallic Brackets to the holes with supplied screws.

D. Put the unit to the Metallic Brackets and make it ﬁrm.

PLACING AND MOUNTING

Mark and drill 2 holes with 30.9 inches distance

in same horizontal level.

supplied screw

A. Mark the position of the mounting holes on the wall using a pencil.

B. Drill appropriate holes by powerful electric drill on wall.

C. Insert the supplied plastic inserts into the holes by hammer.

D. Mounted the supplied Metallic Brackets to the holes with supplied screws.

E. Put the unit to the Metallic Brackets and make it ﬁrm.

Mark and drill 2 holes with 30.9 inches distance

in same horizontal level.

2.2 Mounting to the brick wall

PLACING AND MOUNTING

supplied screw

supplied plastic insert

3568 9 10

1. INDICATORS

2. REMOTE SENSOR

3. AUX IN 1 JACK

6. PLAY/PAUSE BUTTON

4. VOLUME- 9. VOLUME+

8. SCAN BUTTON

10. PAIR BUTTON

BT AUX IN 1 AUX IN 2 OPTICAL

AUX IN 1 POWER SOU RCE SCAN PAIR

BT AU X IN 1 AU X IN 2 OP TI CAL

AU X IN 1 PO WER S OU RCE SC AN PAI R

PRODUCT OVERVIEW

SOUND BAR

WIRELESS SUBWOOFER

Speakers

DC IN ( 13V ) Jack

5. POWER BUTTON

7. SOURCE BUTTON

AUX IN 2

R L

DC INOPTICAL I N

ANT AU X IN 2

R L

DC I NOP TI CAL I N

AN T

11. ANTENNA

14. DC IN ( 18V )JACK

13. AUX IN 2 JACK

12. OPTICAL IN JACK

11 12 13 14

POWER/FM

Speakers Indicator

18V

DC IN 13 V

1. SOURCE Butto

2. Standby Button

7. ST/MO(Stereo/Mono) Button

8. EQ(Equalizer)

Mute Button

lay/Pause Button

BATTERY INSTALLATION

- Before installation

Remove and discard the insulation tab. Out of the box the Remote Control

has a battery and will be usable after the tab is removed.

-Replace battery for the remote control

1. Push and slide out the battery holder as Figure 1 below.

2. Replace the battery with a new CR2025 button cell with the polarity (+)

side upward.

3. Slide into the battery holder.

Battery precautions

• Never recharge the batteries, apply heat to them or take them apart.

• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

• Do not throw the batteries in fire!

• Attention should be drawn to the environmental aspects of battery disposal.

• If the remote control is not going to be used for a long time, remove the battery

to avoid damage caused by battery leakage corrosion.

POWER CONTROL

- To turn the unit on

• Connect the supplied AC/DC adapter.

• Press STANDBY button to turn on the unit.

- To turn the unit off

• Press STANDBY button on the remote control.

NOTE:

If the unit is not used for a long period of time, disconnect the power adapter.

SO UR CE

(Previous)

(Next)

REMOTE CONTROL

+ST/MO

TUNE- TUNE+

POWER

VOL

TUNE-(Tune Down)

TUNE+(Tune Up)

4. VOL-/+(Volume Down/Up)

FM RADIO

mode until the POWER/FM indicator color turns Red.

2. Press and hold /TUNE- or /TUNE+ on remote control to search station automatically

until a station is found and it will play automatically.

1. Press /TUNE- or TUNE+ button on remote control to search manually to play the

searched station.

Power on the unit and external sound bar, press the SOURCE Button repeatedly to turn to FM

4. Press and hold the SCAN button on the unit to search the station automatically until a station

is found, and it will play automatically.

3. Press the SCAN button on the unit to search the station manually.

NOTE:

If the reception is not good, please extend or relocate the antenna to get better reception. If the reception is not good, please extend or relocate the antenna to get better reception.

NOTE:

EXTERNAL SOUND BAR

NOTE:

If there is no signal received, the indicator of the sound bar will blink.

If there is signal received, the indicator of the sound bar will stay lighting up.

AUX IN 1 sources may include:

·Personal audio players

Personal computers or laptops

Connect a stereo 3.5mm jack cable between the headphone or LINE/

Audio output of the personal audio player and the AUX IN 1 jack on the unit.

color turns Red. Set your personal audio player/computer to play.

NOTE: If ther is no sound or if the volume is not loud enough, you may adjust the

volume level.

POWER

RESET

Computer

MP3

Connect to the output

socket of external

audio devices (MP3,

Computer,ext.)

AUX IN 1 connection

AUX IN 1

BT AU X IN 1 AU X IN 2 OP TICA L

AU X IN 1 PO WER SO UR CE SC AN PAI R

Power on the unit and external sound bar press SOURCE button repeatedly until the

AUX IN 1 indicator

EXTERNAL SOUND BAR

not supplied

POWER/FM

NOTE:

If there is signal received, the indicator of the sound bar will stay lighting up.

If there is no signal received, the indicator of the sound bar will blink.

BT AUX IN 1 AUX IN 2 OPTICAL

AUX IN 1 POWER SOU RCE SCAN PAIR

POWER/FM

AUX IN 2 jack on the rear of the unit.

and

Connect the Audio cable to audio output jack(white jack=L, red jack=R) on DVD

Player

AUX IN 2 sources may include:

· TV/DVD/VCR

AUX IN 2

EXTERNAL SOUND BAR

AU X IN 2

R L

OP TI CAL IN

AN T

color turns Red. Set your DVD or TV,etc to play.

2. Power on the unit and external sound bar, press SOURCE button repeatedly until the

AUX IN 2 indicator

NOTE:

If there is signal received, the indicator of the sound bar will stay lighting up.

If there is no signal received, the indicator of the sound bar will blink.

DC I N 18V

AUX IN 2

R L

OPTICAL I N

ANT

DC IN 18V

(For PCM format only.)

2. Follow the figure below to make the connections.

Optical Cable (not included)

DVD or TV, etc.

REAR PANEL OF WIRELESS SUBWOOFER

OPTICAL IN

AUX IN 2

R L

OPTICAL I N

ANT AU X IN 2

R L

OP TI CAL I N

AN T

1. Power on the unit and sound bar and press SOURCE Button on unit or remote control

to turn to Optical mode, and the Indicator color will be Red.

EXTERNAL SOUND BAR

NOTE:

If there is signal received, the indicator of the sound bar will stay lighting up.

If there is no signal received, the indicator of the sound bar will blink.

DC I N 18V

DC IN 18V

BLUETOOTH

-During playback:

Make sure the Bluetooth connection between the unit and the device is activated.

- Paring:

2. Turn off the Bluetooth functionality of other devices that are paired with your

unit. Only one device can be used with the Bluetooth function at a time.

3. Turn on Bluetooth functionality on your Bluetooth device. Typically, Bluetooth

controls are found on the device’s tools or settings menu (see your user manual).

Turn on Bluetooth connectivity and make your device “discoverable”.

4. Choose “add a new Bluetooth device”or “setup Bluetooth device”on your device.

It will start to search. Once “ ”shows on your device, select it.

If your

device prompts you for a pass code, please enter 0000. If the

pairing attempt fails or times out, please start pairing procedure again.

5. After your device and the unit have connected each other, a sound

can be heard.

NOTE:

The unit will automatically reconnect the last paired device when Bluetooth

mode is reselected from other mode. If for some reason the Bluetooth

connection is lost due to external factors or will not auto reconnect, you

must clear the from you Bluetooth Devices list and begin the pairing

process again.

PSB379

6. Press PAIR Button to disconnect the current connection if you want to pair another

external device.

to turn to Bluetooth mode, and the Indicator color will be Blue.

1. Power on the unit and the external sounbar and press SOURCE Button on unit or remote

control repeadedly

EXTERNAL SOUND BAR

NOTE:

If there is signal received, the indicator of the sound bar will stay lighting up.

If there is no signal received, the indicator of the sound bar will blink.

Product specificaties

Merk:	Proscan
Categorie:	Soundbar
Model:	PSB379

Heb je hulp nodig?

Als je hulp nodig hebt met Proscan PSB379 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Soundbar Proscan

Proscan PSP1740 Handleiding

10 Maart 2025

Proscan PSB379 Handleiding

17 Augustus 2023

Proscan PSP297 Handleiding

17 Augustus 2023

Proscan PSB3713 Handleiding

17 Augustus 2023

Proscan PSB350BT Handleiding

17 Augustus 2023

Handleiding Soundbar

Nieuwste handleidingen voor Soundbar

Trust Rhox GXT 1619 Handleiding

2 April 2025

Muse M-1880 SBT Handleiding

30 Maart 2025

Trust Liro 25484 Handleiding

29 Maart 2025

Bush SR215Y Handleiding

26 Maart 2025

TCL Q6310 Handleiding

11 Maart 2025

Phase Technology Teatro TSB3.0 Handleiding

4 Maart 2025

Cabasse Alcyone 3 Handleiding

26 Februari 2025

Roku Streambar SE Handleiding

25 Februari 2025

Samsung HW-LS60UD Handleiding

14 Januari 2025

Philips HTL2183S Handleiding

13 Januari 2025