Projecta SPM80K Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Projecta SPM80K (8 pagina's) in de categorie Zonnepaneel. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
1
WARNING
SOLAR PANEL
β€’ For installations with lead acid batteries, avoid sparks or flames near the batteries and
always use proper eye protection
β€’ Given sufficient light, solar panels always generate energy even when they are disconnected
β€’ Accidental β€˜shorting’ of the terminals or wiring can result in sparks causing personal injury or a
fire hazard
β€’ Do not scratch or bend solar panels
β€’ Do not disassemble the solar panel
β€’ When mounting solar panels at a height adhere to all relevant safety regulations
β€’ Do not walk on modules
β€’ Do not attempt to increase module output by concentrating light on its surface with mirrors
β€’ Be sure to use components (cables, fuses, etc) greater than 25% of solar panel’s maximum
current ratings
β€’ When storing the Solar panel kit do not pack heavy items on top the Solar panel bag
β€’ Do not disassemble the controller. Take to a qualified person if the unit requires repairing
FEATURE OVERVIEW
SOLAR PANEL
Compact and Powerful – Monocrystalline solar panels are manufactured from a solar cell that
is cast from silicon. These cells are more efficient at producing power than amorphous panels,
so the size of the panel is smaller yet produces greater output power
Lightweight, Foldable Design – Folds up into a self contained bag for easy storage
Scratch Resistant – Panels feature a scratch resistant mat coating for durability
5m Lead & Battery Clips – Fused battery lead makes for trouble free battery connection.
Front pocket for easy storage
Heavy Duty Canvas – Tough canvas material suitable for camping and off-road environments
Metal Support Legs – Legs keep the panels at the optimum angle for maximum performance
Collapsible Tent Pole – The pole feeds through the sewn in loops to keep the panel rigid
when set-up
Reinforced Eyelets – Reinforced eyelets allow you to secure the panels using tent pegs, or hang
the panels vertically
12 VOLT
SOLAR PANEL KITS
MONOCRYSTALLINE
P/No. SPM80K, SPM120K
2
SPECIFICATIONS
SOLAR CONTROLLER
Advanced MCU – Features control pulse width modulated (PWM) technology, high efficiency
operation.
Multi-Chemistry – Target for Gel, AGM, Conventional lead-acid (WET) and Calcium Batteries.
4 Stage Charging – Built in regulator to prevent your battery from being overcharged.
Overcharging occurs when the charge voltage is unregulated. This can result in premature
battery failure.
The regulator also prevents your battery from being under charged, in the solar energy field,
battery undercharge always occurs, especially on some Conventional lead – acid or Calcium
batteries; The unit provides an automatic Equalization feature for deeply drained Conventional
lead acid batteries or Calcium batteries, as well as provides a cycling automatic Equalizing
feature every 28 days.
It keeps the battery fully charged by using a process called β€œfloating”. This means the controller
will stop charging when the battery is full and will automatically start charging the battery as
required. This process will also reduce water loss and help prevent the battery from β€˜drying out’.
Discharge Protection – Protects your battery from discharge at night. Under low light or no
light conditions the solar panel voltage could be less than the battery voltage. The unit contains
a special circuit which prevents current flowing back from the battery and into the solar panel.
LED Indicators – Coloured LED’s to easily indicate the operational status and battery conditions.
Unit Protection – Multi charging protects against reverse polarity, short circuit, over temperature,
over voltage, etc.
P/No. SPM80K SPM120K
TYPE MONOCRYSTALLINE
RATED POWER 80W 120W
OPEN CIRCUIT VOLTAGE 21V
SHORT CIRCUIT CURRENT 5.0A 7.52A
PEAK POWER VOLTAGE 17.5V
PEAK POWER CURRENT 4.56A 6.86A
TEST CONDITIONS 1000W/m2, 25˚C
FUSE 10A
BATTERY CONNECTIONS Battery Clamps
WEIGHT 4.7kg 6.8kg
APPROVALS EMC
BATTERY SIZES 250–900CCA 250–1200CCA
300–1000MCA 350–1500MCA
20–140Ah 40–200Ah
CHARGE TIME 7–35 Hours
Patent Pending
3
BATTERY TYPE SELECTION
Please check your battery manufacturer’s specifications to select correct battery type.
The unit provides 4 battery types for selections: Gel, AGM, WET (conventional lead acid),
and Calcium.
There is a DIP switch at the back of the solar charge controller, this Dip switch is used for
presetting your battery type. Please refer to Figure 1.1 to make DIP switch setting for the proper
battery chemical; the factory default setting is at AGM battery type.
Figure 1.1: Battery Type Setting via DIP switch
Note: Once the Dip switch setting or external wire connection is finished, do not freely change
the DIP switch or external wire connected; otherwise it may damage your battery.


Product specificaties

Merk: Projecta
Categorie: Zonnepaneel
Model: SPM80K

Heb je hulp nodig?

Als je hulp nodig hebt met Projecta SPM80K stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Zonnepaneel Projecta

Handleiding Zonnepaneel

Nieuwste handleidingen voor Zonnepaneel