Projecta HP2200 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Projecta HP2200 (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
2 x 22 AMP HOUR HIGH PERFORMANCE
P/No.s HP2012, HP2200
JUMPSTARTER
2
IMPORTANT SAFETY INFORMATION
Please read this manual thoroughly before use and store in a safe place for future
reference.
WARNINGS
• Risk of explosive gas. Working in the vicinity of a lead-acid battery can be dangerous.
Batteries release explosive gases during normal operation, charging and while
jumpstarting a battery. Before using this jumpstarter, read and follow the instructions
carefully. Follow all manufacturer’s instructions and warnings of the vehicle’s battery
and other equipment being used.
• Jumpstart lead-acid batteries only. Do not use to jumpstart dry-cell batteries commonly
found in household appliances. These batteries may burst and cause injury and/or
property damage.
• Do not smoke, use matches, use a cigarette lighter, or allow a spark or flame near
the battery.
• Do not allow metal to come in contact with the battery posts. It may spark or short-
circuit the battery and cause an explosion.
• Always wear eye protection when operating the jumpstarter
• Remove rings, bracelets, necklaces and watches when working with a lead-acid battery.
• Contains a sealed non-spillable lead acid battery and must be disposed of properly.
• Ensure correct polarity when connecting to vehicle.
• Do not submerge jumpstarter in water.
IMPORTANT CHARGING INFORMATION
• Charge jumpstarter prior to first use, this may take up to 24 hours.
• Fully recharge the jumpstarter after every use and follow charging instructions.
• When jumpstarter is not in use ensure jumpstarter is always on charge.
• Do not allow jumpstarter to become very flat. If the jumpstarter’s battery is below
12.6V in 12V mode or below 25.2V in 24V mode, ensure the jumpstarter is charged
immediately.
3
FEATURES
ENGINE STARTING CAPABILITIES
HP2012
The HP2012 is suitable for starting 12V vehicles.
12V: Petrol vehicles up to 6 litres and diesel vehicles up to 4.5 litres
HP2200
The HP2200 is suitable for starting both 12V and 24V vehicles.
12V: Petrol vehicles up to 6 litres and diesel vehicles up to 4.5 litres
24V: Petrol & Diesel vehicles up to 7 litres in capacity.
TOTAL SAFEGUARD PROTECTION
POLARITY & SURGE PROTECTION
Prevents sparking from accidental reverse connection, as well as protecting your vehicle
from spikes in voltage levels.
CRANKING PROTECTION
Prevents your jumpstarter batteries from being over discharged often caused by over
cranking.
DISCHARGE PROTECTION
Discharge protection disconnects power to all 12V accessories when the battery voltage
reaches low levels.
UNDER & OVER VOLTAGE PROTECTION
The jumpstarter will deactivate and sound an alarm if connected to a battery of
a different voltage to the setting of the jumpstarter, preventing reverse charge and
damage to the jumpstarter battery. This feature will also disconnect the jumpstarter
if the vehicles alternator is malfunctioning with high voltage.
LCD DIGITAL DISPLAY
The jumpstarter is fitted with an LCD digital display that displays the batteries state
of charge, battery voltage mode, correct connection and other warning messages
during operation.
HEAVY-DUTY FULLY INSULATED LEADS
Long 1.6m leads allow easy connection to the vehicles battery while the jumpstarter is
on the ground. Quality cable ensures optimal performance.


Product specificaties

Merk: Projecta
Categorie: Niet gecategoriseerd
Model: HP2200

Heb je hulp nodig?

Als je hulp nodig hebt met Projecta HP2200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Projecta

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd