Projecta HDBT100 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Projecta HDBT100 (30 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 112 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/30
Tray Fitting Instructions to suit Auxiliary battery for
TOYOTA 70 SERIES – V8 TURBO DIESEL – with ABS
Model: All 70 Series from Aug 2012 onwards
with factory fitted ABS
HEAVY DUTY DUAL BATTERY TRAY
P/No. HDBT100
2
IMPORTANT SAFETY INFORMATION
Please read this instruction thoroughly before fitting the tray.
This product is recommend to be fitted by a workshop or qualified mechanical person.
WARNINGS
• Before installation, make sure that the vehicle is stationary and the wheels chocked.
• Be careful when laying wires, not to cause any electrical shorts or wire breakage.
• After installation ensure the bonnet can close without hitting the newly installed battery
and battery tray.
SPECIFICATIONS
Max Battery Size (mm) L300 x W175 x H220
Max Battery Weight 24Kg
Recommended batteries Optima D27M & Optima D31A
Approximate fitting time 1.5 hours
Special tools None required
Recommended Dual DC to DC Charger (P/n: IDC25)
Battery System
Tray Location Engine Bay, Passenger side near firewall
KIT INCLUDES
Hardware
2 x M8 Bolts
2 x M8 Bolts long
1 x M8 Nut
4 x M6 Bolt
1 x M6 Weld Bolt
4 x M6 Nuts
3 x M6 Body Washer
Battery Hold
Down Clamp
Long Top
Support
Short Top
Support
ABS
Computer
Mount
Tray
J Bolts
3
FITTING INSTRUCTIONS
1. Make sure that the vehicle is stationary, the engine is switched off and cool.
Disconnect the negative battery terminal from the main battery.
2. Disconnect and remove the two computers located on wheel arch on passenger
side rear of engine bay taking note of which plug goes to which computer.
3. Remove mounts for the computers (these are no longer required).
4. Secure the wiring joiners against the firewall under multi-pin connector
on firewall.
5. Unbolt and relocate trailer plug fuse/relay box to inner guard using 1 x original
bolt into existing threaded hole.


Product specificaties

Merk: Projecta
Categorie: Niet gecategoriseerd
Model: HDBT100

Heb je hulp nodig?

Als je hulp nodig hebt met Projecta HDBT100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Projecta

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd