Projecta DBC150K Handleiding

Projecta Niet gecategoriseerd DBC150K

Lees hieronder de 📖 handleiding in het Nederlandse voor Projecta DBC150K (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

12 VOLT

ELECTRONIC DUAL

BATTERY ISOLATOR

P/No.s DBC100K, DBC150K, DBC150TK

WARNING

• PLEASE READ THESE INSTRUCTIONS COMPLETELY PRIOR TO INSTALLATION.

• BATTERIES PRODUCE EXPLOSIVE GASES – Ensure no sparks or flames are present.

• Wear eye protection.

• Vehicles must be in “NEUTRAL ”or “PARK ”, park brakes “ON ”

• Follow all vehicle manufacturer’s instructions.

• Beware of moving parts.

• Battery Isolators are designed for negative ground alternator systems with batteries

of the same nominal voltage.

• Batteries of differing voltages cannot be used.

FEATURES

• Easy to Install – The electronic isolator does not require any changes to the vehicle’s

existing wiring. It can be fitted to all 12V vehicle types.

• Priority Charging for Starting Battery – Ensures that the starting battery is fully charged

before connecting the auxiliary battery in parallel.

• Manual Override – If the starting battery is flattened and the auxiliary battery is charged, the

electronic isolator allows the batteries to be manually paralleled to jumpstart the vehicle.

• Over-Current Protection – Protects the Isolator and charging system from over current

damage, which could occur due to a short circuit in the wiring.

• Surge Protection – Provides surge protection for vehicles with electronic ignition/management

systems.

SPECIFICATIONS

PART NO. DBC100 DBC150

VOLTAGE 12V 12V

CHARGING CURRENT 75A/100A peak 125A/150A peak

CHARGE TYPE Parallel Parallel

CONTROL Electronic Electronic

MOUNTING Surface/firewall/battery side Surface/firewall/battery side

CURRENT DRAW Charging 500mA Charging 500mA

(Standby 30mA) (Standby 30mA)

VOLTAGE DROP None None

SURGE PROTECTION Built in Built in

ITEMS NEEDED

If you have purchased the Projecta Electronic Isolator (P/No. DBC100 or DBC150) you will also need:

• Charged auxiliary battery – Deep cycle recommended for most applications

• Auxiliary battery cradle & battery clamp

• Battery terminals & lugs

• 150A fuse or circuit breaker

• Battery cable

– 14mm² (6 B&S) minimum for engine bay mounted auxiliary batteries (up to 3m)

– 20mm² (4 B&S) for rear of vehicle / trailer mounted auxiliary batteries

If you have purchased the Projecta Electronic Dual Battery System (P/No. DBC100K, DBC150K or

DBC150TK) you will only need:

• Charged auxiliary battery – Deep cycle recommended for most applications

• Auxiliary battery cradle & battery clamp

For all ‘dual battery systems’, follow the instruction supplement included in the kit.

INSTALLATION – MOUNTING

1. Disconnect the negative battery cable (Earth) from the vehicle’s starting battery.

Note: To prevent the loss of vehicle electronic memories, radio presets & security codes, it is

recommended that an “Electrical System Memory Protector” be used.

2. Mount the auxiliary battery cradle and fit the auxiliary battery.

3. Mount the electronic isolator in a convenient location as near to the main battery as possible and

no further than 3m. Keep the isolator as far as possible from the exhaust manifold, turbo or any

other high temperature components. Do not mount on the engine.

‘L’ bracket mounting – The ‘L’ bracket is fitted to the rear of the isolator. Once attached to the

isolator the bracket can be fastened to the vehicle using screws/bolts or slipped under the battery

for battery side mounting.

Surface mounting – Using the supplied template (page 11), select a location which offers a flat

plastic or thin metal surface to mount, mark and drill 2 x 2mm (5/64 ”) holes and mount the isolator

with the screws provided.

Product specificaties

Merk:	Projecta
Categorie:	Niet gecategoriseerd
Model:	DBC150K

Heb je hulp nodig?

Als je hulp nodig hebt met Projecta DBC150K stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Projecta

Projecta HDBT200 Handleiding

31 Mei 2023

Projecta SC320D Handleiding

18 Mei 2023

Projecta VR020 Handleiding

13 Mei 2023

Projecta SC220 Handleiding

8 Mei 2023

Projecta VR005 Handleiding

28 April 2023

Projecta LVD30 Handleiding

27 April 2023

Projecta HDBT252 Handleiding

26 April 2023

Projecta DBC150 Handleiding

16 April 2023

Projecta HDBT108 Handleiding

15 April 2023

Projecta VSR100 Handleiding

10 April 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Voltcraft MSW 3000-12-G Handleiding

30 December 2025

Voltcraft AL6000 Handleiding

30 December 2025

Voltcraft BC2500 Handleiding

30 December 2025

Voltcraft PSW 3000-12-G Handleiding

30 December 2025

Voltcraft PSW 1500-12-G Handleiding

30 December 2025

Voltcraft PSW 2000-12-G Handleiding

30 December 2025

Einhell WB 50 Handleiding

30 December 2025

Hisense HAF1800D Handleiding

30 December 2025

Eufy Outdoor / Indoor Siren Handleiding

30 December 2025

Lenco TTA-180TN Handleiding

30 December 2025