Proaim P-OHLR-01 Handleiding

Proaim Statief P-OHLR-01

Lees hieronder de 📖 handleiding in het Nederlandse voor Proaim P-OHLR-01 (4 pagina's) in de categorie Statief. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
What s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Overhead Camera / Light Modular Studio Rig
OHLR(P- -01)
A s s e m b l y M a n u a l
3 x Accessory Spacers
Ball Head 3” Riser
End Spacers with Stand Post Adapters Wrench 1/4" 20 and 3/8" 16 Screws - -
4 Each Secon
2
Aaching Rail Secon
The End Spacers have and 1/4” 3/8”
mounng threads. Mount the 2 Stand
adapters at the boom of the End spacers.
Then mount it on the stand and secure it by
ghtening the knob.
Press in the Track into the end caps unl you
hear a click.
Proaim Overhead Rig Setup
The Accessory Spacers also include and1/4”
3/8” threads for mounng accessories. Place
the Accessory Spacers at the desired locaon
along the Track. The Spacer s end caps must
be facing down. Make sure the Accessory
Spacer clicks on the track rails.
3x Accessory Spacers
Aach track secons as shown and secure
them using the provided bolts. The Track
comes in a pair of 3 x 4 secons, so the
maximum length for the Track is 12.
The Track includes two types of Spacers:
2x End Spacers
3
NOTE: You can mount mulple camera gears
on Accessory Spacers, e.g. cameras, lights, mics,
monitors, etc.
Aaching Riser for Camera Setup3”
The Overhead comes with the ball head that
features a quick-release camera plate. Aach
ball head with Riser and secure properly.3”
Screw in your riser with Accessory Spacer, as-
shown in the image.
Mount your camera into the Quick release
plate and secure it properly. You can adjust
the camera angle according to your needs.


Product specificaties

Merk: Proaim
Categorie: Statief
Model: P-OHLR-01

Heb je hulp nodig?

Als je hulp nodig hebt met Proaim P-OHLR-01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Statief Proaim

Handleiding Statief

Nieuwste handleidingen voor Statief