Proaim P-OHCR-01 Handleiding

Proaim Statief P-OHCR-01

Lees hieronder de đź“– handleiding in het Nederlandse voor Proaim P-OHCR-01 (5 pagina's) in de categorie Statief. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Clip on Overhead Rig for DSLR Video -
Camera Setups (P- -OHCR 01)
A s s e m b l y M a n u a l
Rails
2 x Track Clamps 1 x Camera Mounîžźng Plate
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmiîž©ed by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permiîž©ed by the applicable copyright
statutes or in wriîžźng by the Publisher.
2
• Loosen the track clamp's knob and mount it
by inserîžźng it into the baby pin.
Clip on Overhead Rig -Setup
• Insert the track clamp into the baby pin and
îžźghten it properly with the help of a knob.
• Straighten the rails by opening them
manually.
• By pressing the pin, join the rails together.
• Aer joining the rails, it will be properly
straightened.
• Loosen both the knobs of the track clamp.
3
• Insert the rail on to the top part of the track
clamp.
• Secure by ghtening both the knobs together.
• Loosen the 4 knobs of the camera mounng
plate.
• Loosen the mounng plate.
• Then properly insert the rail in the camera
mounîžźng plate, As shown in the image.
• Tighten the 4 knobs of the camera mounng
plate properly and insert it into the second
track clamp.


Product specificaties

Merk: Proaim
Categorie: Statief
Model: P-OHCR-01

Heb je hulp nodig?

Als je hulp nodig hebt met Proaim P-OHCR-01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Statief Proaim

Handleiding Statief

Nieuwste handleidingen voor Statief