Pro-User APR043x2 Handleiding

Pro-User Dashcam APR043x2

Lees hieronder de 📖 handleiding in het Nederlandse voor Pro-User APR043x2 (28 pagina's) in de categorie Dashcam. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
WIRELESS BACK-UP CAMERA SYSTEM
with 11cm / 4.3” monitor
KABELLOSES RÜCKFAHR-KAMERA-SYSTEM
mit 11cm / 4.3” Monitor
SYSTEME DE CAMERA DE RECUL SANS FIL
avec écran 11cm / 4.3”
DRAADLOOS CAMERASYSTEEM
met 11cm / 4.3” monitor
APR043X2
2
INTRODUCTION
The Pro-User APR043X2 is member of the family of advanced car back-up systems
manufactured by Pro User International Ltd.
The Pro-User Wireless Back-up Camera and Monitor, when used as described, will
improve your ability to see behind your car, camper, trailer, or mini-van. We have taken
numerous measures in quality control to ensure that your product arrives in top condition,
and will perform to your satisfaction.
Please carefully read and follow the following safety and operating instructions.
IMPORTANT SAFETY INSTRUCTIONS
Before You Install
If you are not confident working with 12 volt DC vehicle wiring, removing and reinstalling
interior panels, carpeting, dashboards or other components of your vehicle, contact the
vehicle’s manufacturer, or consider having the camera system professionally installed.
Interference
This device, as well as all other wireless devices, may be subject to interference.
Interference may be caused by cell phones, Bluetooth headsets, Wi-Fi routers, power
lines and other various electrical equipment, etc.
Repair
The camera system should not be opened. Any attempt at modification or repair by the
user will entail the loss of your guarantee.
PARTS
1. Monitor and mounting Arm 2. Camera with mounting plate X2
3. Transmitter Box X2 4. Mounting Accessories X2 5. Monitor Power Cable
6. Transmitter Box Power Cable X2
3
INSTALLATION
These instructions do not apply to all vehicles. They are only meant as a general
guide due to the number of different makes & models. For vehicle specific
questions contact your vehicle’s manufacturer.
Camera installation
There are several ways to mount the camera on the back of your car. But the most
convenient is to mount it near the license plate of the car. Supplied is one mounting plate
that can be fixed behind the license plate, and the mounting plate have been installed in
the camera.
The camera is tiltable, camera angle can be adjusted manually on vertical direction.
Make
sure that its field of view and detection are not obstructed.
At some type of cars it is not possible to mount the camera near the license plate. You
may have to find another spot at the back of your car to mount the camera.
There are two sets of cameras and transmitters, use the same way below to install them
on the vehicle and trailer respectively.
1. Remove the rear license plate, and then loosen the license plate bolts/screws.
2. Mount the license plate on the license plate bracket.
3. Choose a routing path for the camera’s power cable through the vehicle’s body to the
reverse light circuit. If in doubt, seek professional installation assistance.


Product specificaties

Merk: Pro-User
Categorie: Dashcam
Model: APR043x2

Heb je hulp nodig?

Als je hulp nodig hebt met Pro-User APR043x2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Dashcam Pro-User

Handleiding Dashcam

Nieuwste handleidingen voor Dashcam