Pro-Ject Phono Box S2 Ultra Handleiding

Pro-Ject Niet gecategoriseerd Phono Box S2 Ultra

Lees hieronder de 📖 handleiding in het Nederlandse voor Pro-Ject Phono Box S2 Ultra (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
INSTRUCTIONS FOR USE
Pro-Ject Phono Box S2 Ultra
© Pro-Ject Audio Systems -Ject Phono Box S2 Ultra 2018. .25 · Pro · Revision 10
2
Dear music lover,
thank you for purchasing a P -Ject Audio Systems phono amplifier. ro
In order to achieve maximum performance and reliability you should study these instructions for use
carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that
the voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply
is easily accessible at all times. Never handle the device, the power supply while your hands are
wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid,
such as a flower vase on or near the device. Never spill any liquid on the device or the power
supply. Never place any naked flame sources, such as lighted candles on or near the device. The
product shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any
other similar conditions.
Use the dip switches at the bottom of the unit to set input gain, input capacitance and input impedance.
Please set both channels equally.
To find out which type your cartridge is please consult the literature accompanying your cartridge.
The literature for cartridges should also specify the correct input impedance (low-output MC cartridges)
and the correct input capacitance (high-output MC and MM cartridges), into which the cartridge is
designed to work. If in doubt please consult your dealer.
To alter settings the unit must be disconnected from the power supply and the amplifier.
* Input capacitance is irrelevant for low-output MC cartridges
3
A switch at the back of the activates and deactivates the subsonic filter. phono amplifier
Make all connections whilst the phono amplifier is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked
red, the left channel black or white.
Do not connect the phono amplifiers output to a phono input (sometimes labelled gram disc, or
RIAA) on the amplifier.
Never use any other power supply than the one supplied with the unit.
Connect the tonearm signal lead to the of the phono amplifier. The earthing wire may be connected to In
the screw terminal if you encounter hum problems when using the record player.
Connect the of the phono amplifier to a line input (such as or ) on Out AUX, , CD Tuner, Tape Video
your amplifier.
Connect the low voltage plug from the power supply to the socket of the phono amplifier Power 18V DC
before connecting the power supply to the mains.


Product specificaties

Merk: Pro-Ject
Categorie: Niet gecategoriseerd
Model: Phono Box S2 Ultra

Heb je hulp nodig?

Als je hulp nodig hebt met Pro-Ject Phono Box S2 Ultra stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Pro-Ject

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd