Privileg RSBC 3B19 X Handleiding

Privileg Vaatwasser RSBC 3B19 X

Lees hieronder de 📖 handleiding in het Nederlandse voor Privileg RSBC 3B19 X (8 pagina's) in de categorie Vaatwasser. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

DAILY REFERENCE

GUIDE

You can download the Safety Instructions and the Use and Care Guide, by visiting our website

docs.whirlpool.eu and following the Instructions on the back of this booklet.

Before using the appliance carefully read Health and Safety guide.

PRODUCT DESCRIPTION

APPLIANCE

1.Upper rack

2. Foldable flaps

3.Upper rack height adjuster

4.Upper spray arm

5.Lower rack

6.Cutlery basket

7.Lower spray arm

8.Filter Assembly

9.Salt reservoir

10.Detergent and Rinse Aid dispensers

11.Rating plate

12.Control panel

0000 000 00000

Service:

1011

9 8

CONTROL PANEL

1. On-Off/Reset button with indicator light

Program selection button with indicator light

Half Load button with indicator light / Key lock

Eco program indicator light

5. Key lock indicator light

6. Display

7. Program number and remaining time indicator

Tablet (Tab) indicator light

9. Closed water tap indicator light

10. Rinse Aid refill indicator light

11. Salt refill indicator light

12. Tablet (Tab) button with indicator light

13. Delay button with indicator light

14. Start/Pause button with indicator light / Drain out

4 8

145 6 7 10

129

FIRST TIME USE

SALT, RINSE AID AND DETERGENT

ADVICE REGARDING THE FIRST TIME USE

After installation, remove the stoppers from the racks and the retaining

elastic elements from the upper rack.

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and

on the machine’s functional components.

• It is important that the salt reservoir be never empty.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher (see

PROGRAMS DESCRIPTION) and should be filled when the SALT REFILL

indicator light in the control panel is lit.

1.Remove the lower rack and unscrew the

reservoir cap (anticlockwise).

2.Position the funnel

(see figure)

and fill the salt

reservoir right up to its edge (approximately 1 kg);

it is not unusual for a little water to leak out.

3.Remove the funnel and wipe any salt residue

away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get

into the container during the wash program (this could damage the

water softener beyond repair).

Whenever you need to add salt, we recommend carrying out the

procedure before the washing cycle is started.

SETTING THE WATER HARDNESS

To allow the water softener to work in a perfect way, it is essential that

the water hardness setting is based on the actual water hardness in

your house. This information can be obtained from your local water

supplier.

The factory setting is for average (3) water hardness.

• Switch on the appliance by pressing the ON/OFF button.

• Switch off the appliance by pressing the ON/OFF button.

• Hold down button START/PAUSE for 5 seconds, until you hear a

beep.

• Switch on the appliance by pressing the ON/OFF button.

•

The current selection level number and the salt indicator light both flash.

• Press button P to select the desired hardness level (see WATER

HARDNESS TABLE).

• Switch off the appliance by pressing the ON/OFF button.

Setting is complete!

As soon as this procedure is complete, run a program without loading.

Only use salt that has been specifically designed for dishwashers.

After the salt has been poured into the machine, the SALT REFILL

indicator light switches off.

If the salt container is not filled, the water softener and the heating

element may be damaged as a result .

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid dispenser B should

be filled when the RINSE AID REFILL indicator light in the control

panel is lit.

1. Open the dispenser by turning the cap

in an anticlockwise

direction.

2. Carefully introduce the rinse aid as far as the maximum (110 ml)

reference notch of the filling space - avoid spilling it. If this happens,

clean the spill immediately with a dry cloth.

3. Screw the cap back on.

NEVER pour the rinse aid directly into the tub.

ADJUSTING THE DOSAGE OF RINSE AID

If you are not completely satisfied with the drying results, you can

adjust the quantity of rinse aid used.

Turn the adjuster C.

The factory setting is for a medium level.

• If you see bluish streaks on the dishes, set a low number (1-2).

• If there are drops of water or limescale marks on the dishes, set a high

number (5-6).

A Rinse aid dispenser

cap.

(Unscrew the cap to fill

the dispenser).

B Rinse aid dispenser

C Rinse aid dosage

adjuster.

(You can set up to a max.

of 6 levels).

FILLING THE DETERGENT DISPENSER

Open the detergent dispenser and measure out the detergent

according to Programs Table.

D Lid opening button

(Press to access the

containers)

E Cover

(Detergent containers).

Remove detergent resi-

dues from the edges of

the containers before

closing the cover until it

clicks.

F Pre-wash detergent

container.

Detergent for pre-wash

(pour in the powder or liquid detergent after consulting the PROGRAMS

TABLE).

G Wash detergent container.

Detergent for wash (pour in the powder, liquid or tablet detergent

after consulting the PROGRAMS TABLE).

The detergent dispenser automatically opens up at the right time

according to the program.

If all-in-one detergents are used, we recommend using the TABLET

button, because it adjusts the program so that the best washing and

drying results are always achieved.

Water Hardness Table

Level °dH

German degrees

°fH

French degrees

1 Soft 0 - 6 0 - 10

2 Medium 7 - 11 11 - 20

3 Average 12 - 17 21 - 30

4 Hard 17 - 34 31 - 60

5 Very hard 35 - 50 61 - 90

F CGD

D FG

PROGRAMS TABLE

ECO program data is measured under laboratory conditions according to European Standard EN 50242.

*) Not all options can be used simultaneously.

**) The duration of the program shown on the display or in the booklet is an estimate calculated on standard conditions. The actual time may vary

depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load,

load balancing, additional selected options and sensor calibration. The sensor calibration can increase program duration up to 20 min.

Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W

Program

Drying

phase

Available options *)

Detergent

container Duration of

wash program

(h:min)**)

Water

consumption

(litres/cycle)

Energy

consumption

(kWh/cycle)

F G

1. Eco 50°C 3:00 10 0,83

2. Intensive 65°C - 2:30 14 1,30

3. Normal 55°C - 2:00 13,5 1,10

4. Delicates 45°C - 1:40 10 0,95

5. Rapid 25’ 50°C - - 0:25 8,5 0,50

6. PreWash - - - - 0:10 4 0,01

PROGRAMS DESCRIPTION

Instructions on wash cycle selection.

ECO

Normally soiled crockery. Standard program, the most efficient in terms

of its combined energy and water consumption.

INTENSIVE

Program recommended for heavily soiled crockery, especially suitable

for pans and saucepans (not to be used for delicate items).

NORMAL

Normally soiled crockery. Everyday cycle, that ensures optimal cleaning

performance in shorter time.

DELICATES

Cycle for delicate items, which are more sensitive to high temperatures,

for example glasses and cups.

RAPID 25’

Program to be used for lightly-soiled dishes with no dried food

residues. (Ideal for 2 place settings).

PRE-WASH

Crockery to be washed later. No detergent to be used with this

program.

Notes:

Optimum performance levels when using the “1 Hour” and “Rapid”

programs can be achieved by observing the maximum amounts of

specified place settings.

To reduce consumption even further, only run the dishwasher

when it is full.

Product specificaties

Merk:	Privileg
Categorie:	Vaatwasser
Model:	RSBC 3B19 X
Apparaatplaatsing:	Semi-ingebouwd
Ingebouwd display:	Ja
Breedte:	445 mm
Diepte:	570 mm
Hoogte:	820 mm
Aantal couverts:	10 couverts
Deurkleur:	Niet van toepassing
Snoerlengte:	1.3 m
Uitgestelde start timer:	Ja
Startvertraging:	24 uur
Resterende tijd indicatie:	Ja
Kinderslot:	Ja
Droogklasse:	A
Duur cyclus:	180 min
Geluidsniveau:	49 dB
Jaarlijks energieverbruik:	237 kWu
Energie-efficiëntieklasse (oud):	A+
Installatie compartiment breedte:	450 mm
Installatie compartiment diepte:	560 mm
Waterconsumptie per cyclus:	10 l
Wasklasse:	A
Installatie compartiment hoogte (min):	820 mm
Geïntegreerde timer:	Ja
Aantal wasprogramma's:	6
Productafmeting:	Slimline (45 cm)
Kleur bedieningspaneel:	Roestvrijstaal
Bestek compartiment type:	Mand
Zout indicator:	Ja
Glansmiddel indicator:	Ja
Aantal temperatuurinstellingen:	4
Half-geladen:	Ja
Afwasprogramma's:	Eco, Glass/delicate, Intensive, Normal, Pre-wash
Energieverbruik per cyclus:	0.83 kWu
Jaarlijks waterverbruik:	2800 l
Bovenste mand verstelbare hoogte:	Ja
Installatie compartiment hoogte (max):	900 mm
Temperatuur (max):	65 °C
Watertoevoer:	Cold, Hot
Type beeldscherm:	LCD