Privileg PV2PC10BS7A0 Handleiding

Privileg Vaatwasser PV2PC10BS7A0

Lees hieronder de 📖 handleiding in het Nederlandse voor Privileg PV2PC10BS7A0 (8 pagina's) in de categorie Vaatwasser. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
ENQuick Guide
1
Program
Programs description
Drying
phase
Auto Door
Available
options *)
Duration
of wash
program
(h:min)
**)
Water con-
sumption
(litres/
cycle)
Energy con-
sumption
(kWh/
cycle)
1.
Eco 50°- Program is suitable to clean normally soiled tableware, that for this use,
it is the most ecient programme in terms of its combined energy and water
consumption, and that it is used to assess compliance with the EU Ecodesign
legislation.
3:35 8.7 0.59
2. Auto Intensive 65°- Automatic program for heavily soiled dishes and pans (not
to be used for delicate items). 2:00 - 3:10 14.0 - 17.0 1.50 - 1.85
3. Auto Mixed -55° Automatic program for normally soiled pans and dishes. 1:20 - 3:00 7.0 - 14.0 0.70 - 1.10
4. Glass 45° - Program for delicate items, which are more sensitive to high temper-
atures, for example glasses and cups. 1:40 12.0 1.20
5. Rapid 30’ 45° - Program to be used for half load of lightly-soiled dishes with no
dried food residues. Without drying. - 0:30 9.0 0.50
6.
Extra Hygiene 65° - Normally or heavily soiled crockery, with additional antibacte-
rial wash. Can be used to perform maintenance of the dishwasher.
- 1:50 12.0 1.30
7.
Extra - 50° Program that allows to wash very big items loaded in the lower rack.
Please apply detergent directly to tub instead of detergent dispenser. Upper
rack should be removed with this cycle. -- 1:30 11.0 1.20
8. Pre-Wash - Use to refresh crockery planned to be washed later. No detergent to
be used with this program. - - 0:10 4.5 0.01
9. Push&GO 50° - Everyday wash and dry cycle that ensures great cleaning perfor-
mance in a short time without the need to pre-treat dishes. 1:25 11.5 1.10
1. On-O / Reset button with indicator light
2. Program selection button with indicator light
3. Half Load button with indicator light / Tablet (Tab)
4. Eco program indicator light
5. Display
6. Program number and remaining time indicator
7. Tablet (Tab) indicator light
8. Closed water tap indicator light
9. Rinse Aid rell indicator light
10. Salt rell indicator light
11. Push&GO button with indicator light
4
1
32
965 7 8 1210 1311
12. Delay button with indicator light
13. Start/Pause button with indicator light / Drain out
PLEASE SCAN THE
QR CODE ON YOUR
APPLIANCE IN
ORDER TO HAVE
MORE DETAILED
INFORMATION
Before using the appliance carefully read Safety and Installation Instructions.
After installation, please remember to remove all transport protection parts from
the dishwasher.
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on
the machine’s functional components.
• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher and must be
lled when the SALT REFILL indicator light in the control panel is lit.
1. Remove the lower rack and unscrew the reservoir cap
(anticlockwise).
2. Position the funnel and ll the salt reservoir (see gure)
right up to its edge (approximately 1 kg); it is not unu-
sual for a little water to leak out.
3. Only the rst time you do this: ll the salt reservoir
with water.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get into
the container during the wash program (this could damage the water sof-
tener beyond repair).
Whenever you need to add salt, it is mandatory to complete the pro-
cedure before the beginning of the washing cycle to avoid corrosion.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently pre-
venting scale buildup on heater, contributing also to better cleaning e-
ciency. This system regenerates itself with salt, therefore it is required
to rell salt container when empty.
Frequency of regeneration depends on water hardness level setting - re-
generation takes place once per Eco cycles with water hardness level set 6
to 3.
Regeneration process starts in nal rinse and nishes in drying phase, be-
fore cycle ends.
• Single regeneration consumes: ~3.5L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.
A
C
D
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse
aid dispenser should be lled when the A RINSE
AID REFILL indicator light in the control pan-
el is lit.
NEVER pour the rinse aid directly into the
appliance tub.
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device . Introduce the C
detergent into the dry dispenser only. Place the amount of detergent for D
pre-washing directly inside the tub.
If all-in-one detergents are used, we recommend using the TABLET button,
because it adjusts the program so that the best washing and drying results
are always achieved.
Usage of detergent not designed for dishwashers may cause malfunc-
tion or damage to the appliance.
CONTROL PANEL
FIRST TIME USE More information in the Daily Reference Guide on website.
PROGRAMS TABLE
2
Quick Guide
EN
DELAY - The start of the program may be delayed for a period of time
between and hours.0:30 24
The DELAY function cannot be set once a wash cycle has been started.
TABLET (Tab) - If you use powder or liquid detergent, this option
should be o.
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected
program (see PROGRAMS TABLE), the corresponding LED ashes rapidly 3 times and beeps will sound. The option will not be enabled.
PUSH&GO - button is an easily distinguishable button that allows you
direct access to the Push&GO program, a wash and dry cycle that
ensures great cleaning performance in a short time. You don’t have to worry
which program to choose, Push&GO cycle will do the work for you.
EXTRA - makes it possible to carry out a heavy-duty wash cycle of
large crockery up to a max height of 53cm. baking pans, oven grids,
dripping pans, hob grids, large saucepans, serving dishes, pizza
dishes, stainless-steel hood lters.
Remove the upper rack to load bulky crockery.
Release the two locks (right and left) and pull out the rack.
When the upper rack is tted, the locks must be always
closed.
In order for the water to reach the crockery everywhere,
arrange it as shown in the Figure.
Do not start the dishwasher without the upper rack
using wash cycles other than EXTRA.
To carry out the wash cycle Extra pour the detergent
DIRECTLY INTO THE TUB and not into the dispenser.
HALF LOAD using the upper or lower rack - If there are not many
dishes to be washed, a half load cycle may be used in order to save
water, electricity and detergent. Remember to load the upper or lower
rack only, and to reduce the amount of detergent accordingly.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on
comparative EN testing conditions, please send an email to the following address:
dw_test_support@europeanappliances.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration up to 20 min.
Auto Door is a convection drying system which automatically opens
the door during/after drying phase to ensure exceptional drying
performance every day. Door opens at the temperature that is safe
to your kitchen furniture.
OPTIONS AND FUNCTIONS Please scan on your product in order to have more detailed information. the QR code
LOADING THE RACKS CAPACITY: 10 standard place-settings
CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS
AA
B
C
1 2 3 4
In case you nd foreign objects (such as broken glass, porcelain, bones, fruit seeds
etc.) please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).
To remove the upper spray arm,
turn the plastic locking ring in
aclockwise direction.
The lower spray arm may be
removed by pulling it upwards.
CARE AND MAINTENANCE More information in the Daily Reference Guide on website.
UPPER RACK
Load delicate and li-
ght dishes: glasses,
cups, saucers, low sa-
lad bowls.
(loading example for
the upper rack)
FOLDABLE
FLAPS WITH
ADJUSTABLE
POSITION
LOWER RACK
For pots, lids, plates, salad
bowls, cutlery etc. Large
plates and lids should ide-
ally be placed at the sides
to avoid interferences
with the spray arm.
The lower rack has tip-up
supports which can be
used in a vertical position
when arranging plates or
(loading example
for the lower rack) in a horizontal position
(lower) to load pans and
salad bowls easily.
CUTLERY BASKET
The basket is equipped
with top grilles for im-
proved cutlery arrange-
ment. The cutlery basket
should be positioned only
at the front of the lower
rack.
Knives and other uten-
sils with sharp edges must be placed in
the cutlery basket with the points facing
downwards or they must be positioned
horizontally in the tip-up compartments
on the upper rack.
ENQuick Guide
3
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The dishwasher does
not ll the
water. Display shows:
and , both On/F6
O and START/Pause
LEDs are blinking
rapidly.
No water in the water supply or the tap is
closed. Make sure there is water in the water supply or the tap running.
The inlet hose is bent. Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwash-
er and reboot.
The sieve in the water inlet hose is clogged;
it is necessary to clean it.
After having carried out the verication and cleaning, turn o and turn on the
dishwasher and restart a new program.
Dishwasher nishes the
cycle prematurely.
Display shows: F15
and both On/O and
START/Pause LEDs are
blinking rapidly.
Drain hose positioned too low or siphoning
into home sewage system.
Check if end of drain hose is placed at correct height (see INSTALLATION). Check
for siphoning into home sewage system, install air admittance valve if necessary.
Air in water supply. Check water supply for leaks or other issues letting air inside.
Detergent leaks.
Depends on the liquid detergent used and
can be emphasized in case of Delay option is
activated.
Small leaks will not cause machine malfunction and can be avoided by changing
liquid detergent type or using tablets.
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code on your product.
• Visiting our website and docs.privileg.eu parts-selfservice.europeanappliances.com
• Alternatively, (See phone number in the warranty booklet). When contacting our After-sales contact our After-sales Service
Service, please state the codes provided on your product‘s identication plate.
The model information can be retrieved using the QR-Code reported in the energy label. The label also includes the model
identier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.
IEC 436
:
In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues
please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period
of either up to 7 or up to 10 years, according to the specic Regulation requirements.
TROUBLESHOOTING
Please scan the on your product in order to have more detailed information.QR code

Product specificaties

Merk: Privileg
Categorie: Vaatwasser
Model: PV2PC10BS7A0

Heb je hulp nodig?

Als je hulp nodig hebt met Privileg PV2PC10BS7A0 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Vaatwasser Privileg

Privileg

Privileg PV2IC10BS7LA0 Handleiding

14 Januari 2025
Privileg

Privileg PV2PC10BS7A0 Handleiding

14 Januari 2025
Privileg

Privileg PV2UC10BS7A0S Handleiding

14 Januari 2025
Privileg

Privileg P0B ECO D551 X Handleiding

14 Januari 2025
Privileg

Privileg P0U ECO D551 S Handleiding

14 Januari 2025
Privileg

Privileg P0F ECO D551 S Handleiding

14 Januari 2025
Privileg

Privileg PV2FC10BS7A0S Handleiding

14 Januari 2025
Privileg

Privileg RFO 3C23 A 6.5 X Handleiding

30 November 2024
Privileg

Privileg RSBC 3B19 X Handleiding

17 November 2024
Privileg

Privileg RUO 3C23 A 6.5 X Handleiding

26 Juni 2023

Handleiding Vaatwasser

Nieuwste handleidingen voor Vaatwasser

Whirlpool

Whirlpool WFE 2B19 Handleiding

14 Januari 2025
SEIKI

SEIKI SC-1300AU6DWW Handleiding

13 Januari 2025
Whirlpool

Whirlpool WH8IB15B2M6LS0 Handleiding

13 Januari 2025
Hoover

Hoover HFS 2F492X/E Handleiding

13 Januari 2025
Whirlpool

Whirlpool W0I D734L S Handleiding

13 Januari 2025
Whirlpool

Whirlpool WH8IC15B4M6LHC0 Handleiding

13 Januari 2025
Whirlpool

Whirlpool WH8IA15AM3TUS0 Handleiding

13 Januari 2025
Whirlpool

Whirlpool WH3ID10BS7SA0 Handleiding

13 Januari 2025
Grundig

Grundig GNVP4432PW Handleiding

13 Januari 2025
Bosch

Bosch SGV45M83EU Handleiding

13 Januari 2025