Prem-i-air EH1274 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Prem-i-air EH1274 (8 pagina's) in de categorie Kachel. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
EH1274
1.5kW Convector Heater
2 Heat settings
Adjustable thermostat
Free-standing or wall mounting
Convenient built-in carrying handle
Safety overload cut-out
2 year guarantee
Page 1
IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the
user of the product for future reference.
INSTALLATION
For free-standing use: attach the feet to the underneath of
the heater using the four 12mm (½") screws.
To wall-mount: Firstly, remove the lower brackets from the
back of the heater, turn them upside down and replace them,
so that the tags protrude below the heater.
Referring to the diagram opposite, draw two horizontal lines
on the wall 308mm (12¼") apart, the lower line more than
50mm (2") from the floor.
On the upper line, drill holes 250mm (9¾") from the centre
line, using a 6mm (¼") masonry bit, and insert a wall plug.
Insert a screw into the hole and almost fully tighten.
On the upper line, drill holes 233mm (9¼") from the centre
line, using a 6mm (¼") masonry bit, and insert a wall plug.
Hang the heater on the two top brackets using the keyhole
slots on the back.
The lower brackets should now line up with the lower holes.
Insert a screw into the each of the holes through the
brackets, and fully tighten.
Page 2
DRILLING DIMENSIONS FOR WALL MOUNTING
Page 3


Product specificaties

Merk: Prem-i-air
Categorie: Kachel
Model: EH1274

Heb je hulp nodig?

Als je hulp nodig hebt met Prem-i-air EH1274 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Kachel Prem-i-air

Handleiding Kachel

Nieuwste handleidingen voor Kachel